journal article·2017-10

Microstructure Evolution and Age-Hardening Behavior of Microalloyed Austenitic Fe-30Mn-9Al-0.9C Light-Weight Steels

Joonoh Moon, Seong-Jun Park, Changhee Lee, Heung Nam Han, Tae-Ho Lee, Chang-Hoon Lee

Publisher page

Abstract

The aging behavior and mechanical properties of microalloyed austenitic Fe-30Mn-9Al-0.9C light-weight steels were investigated through transmission electron microscopy analysis, electron backscatter diffraction analysis, tensile tests, and Vickers hardness tests. The base steels were aged at 823 K (550 °C) for up to 10,000 minutes. The true stress–strain responses of solution-treated samples before aging showed that the addition of Nb and/or V improved the strength by grain refinement and precipitation hardening. During the process of tensile deformation, the strain-hardening rate of Fe-30Mn-9Al-0.9C steel steadily increased due to the microband-induced plasticity (MBIP) from the onset of plastic deformation to e = 25 pct, while such behavior was weakened and not observed in Nb- and/or V-added steels despite MBIP. In the early stage of aging, the Vickers hardness gradually increased with an increase in the aging time due to the precipitation of κ-carbide of (Fe,Mn)3AlC and remained stagnant between the aging times of 1000 and 3000 minutes. The hardness increased again after 3000 minutes due to the formation of ferrite and brittle β-Mn.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. H. Kim, D.-W. Suh and N.J. Kim: Sci. Technol. Adv. Mater., 2013, vol. 14, pp. 1-11.10.1088/1468-6996/14/1/014205 ↗
2. C.L. Lin, C.G. Chao, H.Y. Bor and T.F. Liu: Mater. Trans., 2010, vol. 51, pp.1084-88.10.2320/matertrans.M2010013 ↗
3. J.D. Yoo and K.-T. Park: Mater. Sci. & Eng. A, 2008, vol. 496, pp. 417-24.10.1016/j.msea.2008.05.042 ↗
4. I. Gutierrez-Urrutia and D. Raabe: Mater. Sci. & Technol., 2014, vol. 30, pp. 1099-1104.10.1179/1743284714Y.0000000515 ↗
5. S.-H. Kim, H. Kim and N.J. Kim: Nature, 2015, vol. 518, pp. 77-79.10.1038/nature14144 ↗
6. D. Kuc, G. Niewielski and I. Bednarczyk: Mater. Charact., 2009, vol. 60, pp. 1185-89.10.1016/j.matchar.2009.03.020 ↗
7. N.S. Stoloff, C.T. Liu and S.C. Deevi: Intermetallics, 2000, vol. 8, pp. 1313-20.10.1016/S0966-9795(00)00077-7 ↗
8. Y. Kimura, K. Hayashi, K. Handa and Y. Mishima: Mater. Sci. & Eng. A, 2002, vol. 329-331, pp. 680-85.10.1016/S0921-5093(01)01607-0 ↗
9. C.W. Kim, S.I. Kwon, B.H. Lee, J.O. Moon, S.J. Park, J.H. Lee and H.U. Hong: Mater. Sci. & Eng. A, 2016, vol. 673, pp. 108-13.10.1016/j.msea.2016.07.029 ↗
10. J. Moon, S.-J. Park, J.H. Jang, T.-H. Lee, C.-H. Lee, H.-U. Hong, D.-W. Suh, S.H. Kim, H.N. Han and B.H. Lee: Scripta Mater., 2017, vol. 127, pp. 97-101.10.1016/j.scriptamat.2016.08.036 ↗
11. L.N. Bartlett, D.C.V. Aken, J. Medvedeva, D. Isheim, N.I. Medvedeva and K. Song: Met. Trans A, 2014, vol. 45, pp. 2421-35.10.1007/s11661-014-2187-3 ↗
12. R. Rana, C. Liu and R.K. Ray: Scripta Mater., 2013, vol. 68, pp. 354-59.10.1016/j.scriptamat.2012.10.004 ↗
13. K. Lee, S.-J. Park, Y.S. Choi, S.-J. Kim, T.-H. Lee, K.H. Oh and H.N. Han: Scripta Mater., 2013, vol. 69, pp. 618-21.10.1016/j.scriptamat.2013.07.015 ↗
14. S.-J. Park, B. Hwang, K.H. Lee, T.-H. Lee, D.-W. Suh and H.N. Han: Scripta Mater., 2013, vol. 68, pp. 365-69.10.1016/j.scriptamat.2012.09.030 ↗
15. G. Frommeyer and U. Brüx: Steel Res. Int., 2006, vol. 77, pp. 627-33.10.1002/srin.200606440 ↗
16. R.A. Howell and D.C. Van Aken: Iron Steel Technol., 2009, vol. 6, pp. 193-212.
17. I.S. Kalashnikov, B.S. Ermakov, O. Aksel’rad, and L.K. Pereira: Metal. Sci. Heat Treatment, 2001, vol. 43, pp. 493-96.10.1023/A:1014805123438 ↗
18. Y.G. Kim, Y.S. Park and J.K. Han: Metall. Trans. A, 1985, vol. 16, pp. 1689-93.10.1007/BF02663026 ↗
19. K. Ishida, H. Ohtani, N. Satoh, R. Kainuma and T. Nishizawa: ISIJ Int., 1990, vol. 30, pp. 680-86.10.2355/isijinternational.30.680 ↗
20. T. Furuhara, T. Shinyoshi, G. Miyamoto, J. Yamaguchi, N. Sugita, N. Kimura, N. Takemura and T. Maki: ISIJ Int., 2003, vol. 43, pp. 2028-37.10.2355/isijinternational.43.2028 ↗
21. J. Moon, S. Kim, J.-I. Jang, J. Lee and C. Lee: Mater. Sci. & Eng. A, 2008, vol. 487, pp. 552-57.10.1016/j.msea.2007.10.046 ↗
22. Y.F. Shen, N. Jia, Y.D. Wang, X. Sun, L. Zuo and D. Raabe: Acta Mater., 2015, vol. 97, pp. 305-15.10.1016/j.actamat.2015.06.053 ↗
23. M.-Y. Seok, I.-C. Choi, J. Moon, S. Kim, U. Ramamurty and J.-I. Jang: Scripta Mater., 2014, vol. 87, pp. 49-52.10.1016/j.scriptamat.2014.05.004 ↗
24. I. Gutierrez-Urrutia and D. Raabe: Acta Mater., 2012, vol. 60, pp. 5791-5802.10.1016/j.actamat.2012.07.018 ↗
25. F. Yang, R. Song, Y. Li, T. Sun and K. Wang: Mater. & Des., 2015, vol. 76, pp. 32-39.10.1016/j.matdes.2015.03.043 ↗
26. K.H. Han, W.K. Choo, D.Y. Choi, and S.P. Hong: TMS-AIME, 1987, pp. 91–106.
27. M.-S. Kim and Y.-B. Kang: CALPHAD, 2015, vol. 51, pp. 89-103.10.1016/j.calphad.2015.08.004 ↗
28. K. Sato, K. Tagawa and Y. Inoue: Met. Trans A, 1990, vol. 21, pp. 5-11.10.1007/BF02656419 ↗