journal article·2016-05

Effect of Energy Input on the Characteristic of AISI H13 and D2 Tool Steels Deposited by a Directed Energy Deposition Process

Jun Seok Park, Joo Hyun Park, Min-Gyu Lee, Ji Hyun Sung, Kyoung Je Cha, Da Hye Kim

Publisher page

Abstract

Among the many additive manufacturing technologies, the directed energy deposition (DED) process has attracted significant attention because of the application of metal products. Metal deposited by the DED process has different properties than wrought metal because of the rapid solidification rate, the high thermal gradient between the deposited metal and substrate, etc. Additionally, many operating parameters, such as laser power, beam diameter, traverse speed, and powder mass flow rate, must be considered since the characteristics of the deposited metal are affected by the operating parameters. In the present study, the effect of energy input on the characteristics of H13 and D2 steels deposited by a direct metal tooling process based on the DED process was investigated. In particular, we report that the hardness of the deposited H13 and D2 steels decreased with increasing energy input, which we discuss by considering microstructural observations and thermodynamics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. ASTM (2012) Standard Specification for Additive Manufacturing Technologies ASTM F2792-12a. ASTM International, West Conshohocken, PA
2. J.H. Jang, B.D. Joo, S.M. Mun, M.Y. Sung and Y.H. Moon: Met. Mater. Int., 2011, vol. 17, pp.167-174.10.1007/s12540-011-0223-z ↗
3. A.J. Pinkerton, W. Wang, and L. Li: Proc. Institution of Mechanical Engineering 2008 (IMechE 2008), 2008, vol. 222, pp. 827–36.10.1243/09544054JEM1008 ↗
4. C. Chen, Y. Wang, H. Ou, Y. He and X. Tang: J. Clean. Prod., 2014, vol. 64, pp.13-23.10.1016/j.jclepro.2013.09.014 ↗
5. D.G. Ahn: Int. J. Precis. Eng. Manuf., 2011, vol. 12, pp.925-938.10.1007/s12541-011-0125-5 ↗
6. J. Mazumder, J. Choi, K. Nagarathnam, J. Koch and D. Hetzner: JOM, 1997, vol. 49, pp.55-60.10.1007/BF02914687 ↗
7. J. Mazumder, A. Schifferer and J. Choi: Mat. Res. Innovat., 1999, vol. 3, pp.118-131.10.1007/s100190050137 ↗
8. W. Yudai, T. Haibo, F. Yanli and W. Huaming: China J. Aeronaut., 2013, vol. 26, pp.481-486.10.1016/j.cja.2013.02.027 ↗
9. M.K. Imran, S. Massod, M. Brandt, S. Bhattacharya, and J. Mazumder: Proceedings on World Academy of Science, Engineering and Technology 2011 (WASET 2011), 2011, vol. 5, pp. 1002–07.
10. L. Xue, J. Chen and S.-H. Wang: Metallogr. Microstruct. Anal., 2013, vol. 2, pp.67-78.10.1007/s13632-013-0061-0 ↗
11. J. Brooks, C. Robino, T. Headley, S. Goods, and M. Griffith: Proceedings on Solid Freeform Fabrication Symposium, 1999, pp. 375–82.
12. D. Cormier, O. Harrysson and H. West: Rapid Prototyp. J., 2004, vol. 10, pp.35-41.10.1108/13552540410512516 ↗
13. K.A. Mumtaz, P. Erasenthiran and N. Hopkinson: J. Mater. Proc. Technol., 2008, vol. 195, pp.77-87.10.1016/j.jmatprotec.2007.04.117 ↗
14. J.P. Kruth, L. Froyen, J.V. Vaerenbergh, P. Mercelis, M. Rombouts and B. Lauwers: J. Mater. Proc. Technol., 2004, vol. 149, pp.616-622.10.1016/j.jmatprotec.2003.11.051 ↗
15. J. Choi and Y. Chang: Int. J. Mach. Tools Manuf., 2005, vol. 45, pp.597-607.10.1016/j.ijmachtools.2004.08.014 ↗
16. J.D. Majumdar, A. Pinkerton, Z. Liu, I. Manna and L. Li: Appl. Surf. Sci., 2005, vol. 247, pp.320-327.10.1016/j.apsusc.2005.01.039 ↗
17. J.D. Majumdar, A. Pinkerton, Z. Liu, I. Manna and L. Li: Appl. Surf. Sci., 2005, vol. 247, pp.373-377.10.1016/j.apsusc.2005.01.131 ↗
18. J.D. Majumdar and L. Li: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 3001-3008.10.1007/s11661-009-0018-8 ↗
19. www.insstek.com (accessed December, 2015)
20. www.factsage.com (accessed December, 2015)
21. W. Kurz and D.J. Fisher: Fundamentals of Solidification, Trans. Tech., Aedermannsdorf, 1984, pp.85-89.
22. T. Hashimoto, H. Terasaki and Y. Komizo: Welding Int., 2004, vol. 149, pp.616-622.
23. K. Gunji, K. Kusaka, E. Ishikawa and K. Sudo: Tetsu-to-Hagane, 1973, vol. 59, pp.1089-1103.10.2355/tetsutohagane1955.59.8_1089 ↗
24. H. Chandler: Heat Treaters’s Guide: Practices and Procedures for Irons and Steels, 2nd ed., ASM Int., Materials Park, OH, 1995, pp.561-563.
25. J.S. Park, M.G. Lee, Y.J. Cho, J.H. Sung, M.S. Jeong, S.K. Lee, Y.J. Choi and D.H. Kim: Met. Mater. Int., 2016, vol. 22, pp.143-147.10.1007/s12540-016-5372-7 ↗
26. G. Laird, R. Gundlach, and K. Röhring : Abrasion—Resistant Cast Iron Handbook. American Foundry Society, IL, 2000, pp. 46–49.
27. S. Kou: Welding Metallurgy, 2nd ed., John Wiley, New York, 2003, pp.114-116.