Effect of Strain Rate on Evolution of the Deformation Microstructure and Texture in Polycrystalline Copper and Nickel
Source abstract
Abstract
The evolution of crystallographic texture in polycrystalline copper and nickel has been studied. The deformation texture evolution in these two materials over seven orders of magnitude of strain rate from 3 × 10−4 to ~2.0 × 10+3 s−1 show little dependence on the stacking fault energy (SFE) and the amount of deformation. Higher strain rate deformation in nickel leads to weaker \( \left\langle {101} \right\rangle \) texture because of extensive microband formation and grain fragmentation. This behavior, in turn, causes less plastic spin and hence retards texture evolution. Copper maintains the stable end \( \left\langle {101} \right\rangle \) component over large strain rates (from 3 × 10−4 to 10+2 s−1) because of its higher strain-hardening rate that resists formation of deformation heterogeneities. At higher strain rates of the order of 2 × 10+3 s−1, the adiabatic temperature rise assists in continuous dynamic recrystallization that leads to an increase in the volume fraction of the \( \left\langle {101} \right\rangle \) component. Thus, strain-hardening behavior plays a significant role in the texture evolution of face-centered cubic materials. In addition, factors governing the onset of restoration mechanisms like purity and melting point govern texture evolution at high strain rates. SFE may play a secondary role by governing the propensity of cross slip that in turn helps in the activation of restoration processes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · High-Velocity Impact and Material Behavior · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. U.F. Kocks, C.N. Tome, and H.R. Wenk: Texture and Anisotropy, Cambridge University Press, London, UK, 1998.
2. S. Speziale, I. Lonardelli, L.Miyagi, J. Pehl, C.E. Tommaseo, and H.-R. Wenk: J. Phys. Cond. Matter, 2006, vol. 18, pp. S1007–20.10.1088/0953-8984/18/25/S08 ↗
3. B. Plunkett, O. Cazacu, and R.A. Lebensohn: J. Phys. IV Proc., 2006, vol. 134, pp. 81–86.10.1051/jp4:2006134014 ↗
4. M.A. Meyers: Dynamic Behaviour of Materials, Wiley, New York, NY, 1994.10.1002/9780470172278 ↗
5. R.J. Asaro and A. Needleman: Acta Metall., 1985, vol. 33, pp. 923–53.10.1016/0001-6160(85)90188-9 ↗
6. S.R. Kalidindi, C.A. Bronkhorst, and L. Anand: J. Mech. Phys. Solids, 1992, vol. 40, pp. 537–69.10.1016/0022-5096(92)80003-9 ↗
7. T. Leffers: Scripta Metall., 1968, vol. 2, pp. 447–52.10.1016/0036-9748(68)90192-0 ↗
8. T. Leffers and O.B. Pederson: Scripta Mater., 2002, vol. 46, pp. 741–46.10.1016/S1359-6462(02)00065-9 ↗
9. U.F. Kocks and H. Mecking: Prog. Mater. Sci., 2003, vol. 48, pp. 171–273.10.1016/S0079-6425(02)00003-8 ↗
10. G.R. Canova, C. Fressengeas, A. Molinari, and U.F. Kocks: Acta Metall., 1988, vol. 36, pp. 1961–70.10.1016/0001-6160(88)90298-2 ↗
11. J.W. Hutchinson: Proc. R. Soc., 1976, vol. A348, pp. 101–27.
12. A. Bhattacharyya, D. Rittel, and G. Ravichandran: Scripta Mater., 2005, vol. 52, pp. 657–61.10.1016/j.scriptamat.2004.11.019 ↗
13. A. Bhattacharyya, D. Rittel, and G. Ravichandran: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1137–45.10.1007/s11661-006-1092-9 ↗
14. A.T. English and G.Y. Chin: Acta Metall., 1965, vol. 13, pp. 1013–16.10.1016/0001-6160(65)90010-6 ↗
15. M.G. Stout, J.S. Kallend, U.F. Kocks, M.A. Przystupa, and A.D. Rollett: Proc. Eighth Conf. on Texture of Materials, 1988, vol. 5.9, pp. 479–84.
16. J. Hirsch and K. Lucke: Acta Metall., 1988, vol. 36, no. 76–1-3, pp. 2863–2927.10.1016/0001-6160(88)90172-1 ↗
17. D.A. Hughes, R. Lebensohn, H.R. Wenk, and A. Kumar: Proc. R. Soc. Lond. A, 2000, vol. 456, pp. 921–53.10.1098/rspa.2000.0543 ↗
18. S. Suwas, R.K. Ray, J.J. Fundenberger, T. Grosdidien, and W. Skrotzki: Solid State Phenom., 2005, vol. 105, pp. 345–50.10.4028/www.scientific.net/SSP.105.345 ↗
19. R.K. Ray: Acta Metall. Mater., 1995, vol. 43, pp. 3861–72.10.1016/0956-7151(95)90169-8 ↗
20. ASM International: High Strain Rate Compression Testing, Mechanical Testing, vol 8, ASM Handbook, ASM International, Materials Park, OH, 1985, pp. 190–207.
21. T. Ungár, J. Gubicza, G. Ribárik, and A. Borbély: J. Appl. Cryst., 2001, vol. 34, pp. 298–310.10.1107/S0021889801003715 ↗
22. G. Ribárik, T. Ungár, and J. Gubicza: J. Appl. Cryst., 2001, vol. 34, pp. 669–76.10.1107/S0021889801011451 ↗
23. F. Montheillet and J. Le Coze: Phys. Stat. Sol. A, 2002, vol. 189, pp. 51–58.10.1002/1521-396X(200201)189:1<51::AID-PSSA51>3.0.CO;2-M ↗
24. W. Skrotzki, N. Scheerbaum, C. Oertel, R.A. Massion, S. Suwas, and L.S. Toth: Acta Mater., 2007, vol. 55, pp. 2013–24.10.1016/j.actamat.2006.11.005 ↗
25. M.A. Meyers, V. Nesterenko, J. LaSalvia, and Q. Xue: Mater. Sci. Engg. A, 2001, vol. 317, pp. 204–25.10.1016/S0921-5093(01)01160-1 ↗
26. M.A. Meyers, Y. Xu, Q. Xue, M. Perez-Prado, and T. McNelly: Acta Mat., 2003, vol. 51, pp. 1307–25.10.1016/S1359-6454(02)00526-8 ↗