Constitutive Behavior of Commercial Grade ZEK100 Magnesium Alloy Sheet over a Wide Range of Strain Rates
Source abstract
Abstract
The constitutive behavior of a rare-earth magnesium alloy ZEK100 rolled sheet is studied at room temperature over a wide range of strain rates. This alloy displays a weakened basal texture compared to conventional AZ31B sheet which leads to increased ductility; however, a strong orientation dependency persists. An interesting feature of the ZEK100 behavior is twinning at first yield under transverse direction (TD) tensile loading that is not seen in AZ31B. The subsequent work hardening behavior is shown to be stronger in the TD when compared to the rolling and 45 deg directions. One particularly striking feature of this alloy is a significant dependency of the strain rate sensitivity on orientation. The yield strength under compressive loading in all directions and under tensile loading in the TD direction is controlled by twinning and is rate insensitive. In contrast, the yield strength under rolling direction tensile loading is controlled by non-basal slip and is strongly rate sensitive. The cause of the in-plane anisotropy in terms of both strength and strain rate sensitivity is attributed to the initial crystallographic texture and operative deformation mechanisms as confirmed by measurements of deformed texture. Rate-sensitive constitutive fits are provided of the tensile stress–strain curves to the Zerilli–Armstrong[1] hcp material model and of the compressive response to a new constitutive equation due to Kurukuri et al.[2]
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. F.J. Zerilli and R.W. Armstrong: ASME, 1995, vol. 48, pp. 121-126.
2. S. Kurukuri, M.J. Worswick, D. Ghaffari Tari, J.T. Carter, and R.K. Mishra: Philos. Trans. R. Soc. A, 2014, vol. 372, p. 20130216.10.1098/rsta.2013.0216 ↗
3. A. Luo: SAE Tech. Paper 2005, vol. 01, p. 0734.
4. J. Min, Y. Cao, J.T. Carter and R. Verma: Magnesium Technology 2012, Wiley, New York, NY.
5. S.R. Agnew and O. Duygulu: Int. J. Plast., 2005, vol. 21 (6), pp. 1161-1193.10.1016/j.ijplas.2004.05.018 ↗
6. X.Y. Lou, M. Li, R.K. Boger, S.R. Agnew and R.H. Wagoner: Int. J. Plast., 2007, vol. 23 (1), pp. 44-86.10.1016/j.ijplas.2006.03.005 ↗
7. S. Kurukuri, A.H. van den Boogaard, A. Miroux, and B. Holmedal: J. Mater. Process. Technol., 2009, vol. 209(15-16), pp. 5636–45.10.1016/j.jmatprotec.2009.05.024 ↗
8. D. Ghaffari Tari and M.J. Worswick: AIP Conf. Proc., 2011, vol. 1353 (1), pp. 1547-1552.10.1063/1.3589737 ↗
9. D. Ghaffari Tari, M.J. Worswick, and S. Winkler: J. Mater. Process. Technol., 2013, vol. 213(8), pp. 1337–47.10.1016/j.jmatprotec.2013.01.028 ↗
10. M. Boba, M.J. Worswick, J.T. Carter, and R.K. Mishra: Int. Conf. on Magnesium Alloys and Their Applications, Vancouver, BC, Canada, 2012.
11. J. Bohlen, M.R. Nürnberg, J.W. Senn, D. Letzig and S.R. Agnew: Acta Mater., 2007, vol. 55 (6), pp. 2101-2112.10.1016/j.actamat.2006.11.013 ↗
12. J. Bohlen, S. Yi, D. Letzig and K.U. Kainer: Mater. Sci. Eng. A, 2010, vol. 527 (26), pp. 7092-7098.10.1016/j.msea.2010.07.081 ↗
13. K. Hantzsche, J. Bohlen, J. Wendt, K.U. Kainer, S.B. Yi and D. Letzig: Scripta Mater., 2010, vol. 63 (7), pp. 725-730.10.1016/j.scriptamat.2009.12.033 ↗
14. L. Jiang, J.J. Jonas and R.K. Mishra: Mater. Sci. Eng. A, 2011, vol. 528 (21), pp. 6596-6605.10.1016/j.msea.2011.05.027 ↗
15. C. Dreyer, W. Chiu, R. Wagoner and S. Agnew: J. Mater. Process. Technol., 2010, vol. 210 (1), pp. 37-47.10.1016/j.jmatprotec.2009.08.022 ↗
16. T. Al-Samman and X. Li: Mater. Sci. Eng. A, 2011, vol. 528(10-11), pp. 3809–22.10.1016/j.msea.2011.01.080 ↗
17. D. Hasenpouth, C. Salisbury, A. Bardelcik and M.J. Worswick: DYMAT, 2009, vol. 2, pp. 1431-1435.
18. D. Hasenpouth: Master’s Thesis, University of Waterloo, Waterloo, ON, Canada, 2010.
19. I. Ulacia, C.P. Salisbury, I. Hurtado and M.J. Worswick: J. Mater. Process. Technol., 2011, vol. 211 (5), pp. 830-839.10.1016/j.jmatprotec.2010.09.010 ↗
20. J. Imbert and M. Worswick: J. Mater. Process. Technol., 2011, vol. 211 (5), pp. 896-908.10.1016/j.jmatprotec.2010.07.021 ↗
21. J. Imbert and M. Worswick: Mater. Process. Technol., 2012, vol. 212 (9), pp. 1963-1972.10.1016/j.jmatprotec.2012.04.020 ↗
22. I. Ulacia, I. Hurtado, J. Imbert, C.P. Salisbury, M.J. Worswick and A. Arroyo: Steel Research Int., 2009, vol. 80 (5), pp. 344-350.
23. T. Yokoyama: Strain, 2003, vol. 39 (4), pp. 167-175.10.1046/j.1475-1305.2003.00086.x ↗
24. T. Mukai, M. Yamanoi and K. Higashi: Mater. Sci. Forum, 2000, vol. 350-351, pp. 97-104.10.4028/www.scientific.net/MSF.350-351.97 ↗
25. E. El-Magd and M. Abouridouane Journal de Physique, 2003, vol. 110, pp. 15-20.
26. R. Smerd, S. Winkler, C. Salisbury, M. Worswick, D. Lloyd and M. Finn: Int. J. Impact Eng., 2005, vol. 32 (1–4), pp. 541-560.10.1016/j.ijimpeng.2005.04.013 ↗
27. A.C. Thompson, C.P. Salisbury, M.J. Worswick and R. Mayer: J. de Physique, 2006, vol. 134, pp. 281-286.
28. S. Kurukuri, D. Ghaffari Tari, M.J. Worswick, J.T. Carter, and R.K. Mishra: Int. Conf. on Magnesium Alloys and Their Applications, Vancouver, BC, Canada, 2012.
29. D. Ghaffari Tari, M.J. Worswick, U. Ali, and M. Gharghouri: Unpublished research, 2013.
30. A. Bardelcik, M. Worswick, S. Winkler and M. Wells: Int. J. Impact Eng., 2012, vol. 50, pp. 49-62.10.1016/j.ijimpeng.2012.06.007 ↗
31. C.P. Salisbury: Master’s Thesis, University of Waterloo, Waterloo, ON, Canada, 2001.
32. A. Bardelcik, C.P. Salisbury, S. Winkler, M. Wells, M.J. Worswick: Int. J. Impact Eng., 2010, vol. 37 (6), pp. 694-702.10.1016/j.ijimpeng.2009.05.009 ↗
33. C. Mason and M.J. Worswick: Int. J. Fract., 2001, vol. 111, pp. 29-51.10.1023/A:1010903415661 ↗
34. A. Bardelcik: Private communication, 2013, University of Waterloo, Waterloo, Canada.
35. I. Ulacia, N. Dudamell, F. Gálvez, S. Yi, M. Pérez-Prado and I. Hurtado: Acta Mater., 2010, vol. 58 (8), pp. 2988-2998.10.1016/j.actamat.2010.01.029 ↗
36. M.R. Barnett: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1799-1806.10.1007/s11661-003-0146-5 ↗
37. Y. Chino, M. Kado and M. Mabuchi, Mater. Sci. Eng. A, 2008, vol. 494 (1-2), pp. 343-349.10.1016/j.msea.2008.04.059 ↗
38. S. Yi, J. Bohlen, F. Heinemann and D. Letzig: Acta Mater., 2010, vol. 58 (2), pp. 592-605.10.1016/j.actamat.2009.09.038 ↗
39. A.S. Khan, A. Pandey, T. Gnäupel-Herold, R.K. Mishra: Int. J. Plast. 2011, vol. 27 (5), pp. 688-706.10.1016/j.ijplas.2010.08.009 ↗
40. R.W. Armstrong and S.M. Walley: Int. Mater. Rev., 2008, vol. 53 (3), pp. 105-128.10.1179/174328008X277795 ↗
41. F.J. Zerilli and R.W. Armstrong: J. Appl. Phys., 1987, vol. 61 (5), pp. 1816-1825.10.1063/1.338024 ↗
42. F.J. Zerilli and R.W. Armstrong: Acta Metall. Mater., 1992, vol. 40 (8), pp. 1803-08.10.1016/0956-7151(92)90166-C ↗