Creep Strength of Dissimilar Welded Joints Using High B-9Cr Steel for Advanced USC Boiler
Source abstract
Abstract
The commercialization of a 973 K (700 °C) class pulverized coal power system, advanced ultra-supercritical (A-USC) pressure power generation, is the target of an ongoing research project initiated in Japan in 2008. In the A-USC boiler, Ni or Ni-Fe base alloys are used for high-temperature parts at 923 K to 973 K (650 °C to 700 °C), and advanced high-Cr ferritic steels are planned to be used at temperatures lower than 923 K (650 °C). In the dissimilar welds between Ni base alloys and high-Cr ferritic steels, Type IV failure in the heat-affected zone (HAZ) is a concern. Thus, the high B-9Cr steel developed at the National Institute for Materials Science, which has improved creep strength in weldments, is a candidate material for the Japanese A-USC boiler. In the present study, creep tests were conducted on the dissimilar welded joints between Ni base alloys and high B-9Cr steels. Microstructures and creep damage in the dissimilar welded joints were investigated. In the HAZ of the high B-9Cr steels, fine-grained microstructures were not formed and the grain size of the base metal was retained. Consequently, the creep rupture life of the dissimilar welded joints using high B-9Cr steel was 5 to 10 times longer than that of the conventional 9Cr steel welded joints at 923 K (650 °C).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. M. Fukuda: J. Jpn. Soc. Mech. Eng., 2011, vol. 114, pp. 244–47 (in Japanese).
2. K. Bell: Report No. 597, The Welding Institute, Abington, Cambridge, U.K., 1997.
3. J.A. Francis, W. Mazur, and H.K.D.H. Bhadeshia: Materials Science and Technology, 2006, vol. 22, pp. 1387-1395.10.1179/174328406X148778 ↗
4. G. Eggeler, A. Ramteke, M. Coleman, B. Chew, G. Peter, A. Burblies, J. Hald, C. Jefferey, J. Rantala, M. deWitte, and R. Mohrmann: International Journal of Pressure Vessels and Piping, 1994, vol. 60, pp. 237-257.10.1016/0308-0161(94)90125-2 ↗
5. F. Abe: Procedia Engineering, 2011, vol. 10, pp. 94-99.10.1016/j.proeng.2011.04.018 ↗
6. M. Tabuchi, M. Kondo, H. Hongo, T. Watanabe, F. Yin, and F. Abe: J. Soc. Mater.Sci., 2005, vol. 54, pp. 162–67 (in Japanese).10.2472/jsms.54.162 ↗
7. S.K. Albert, M. Kondo, M. Tabuchi, F. Yin, K. Sawada, and F. Abe: Metallurgical and Materials Transactions A, 2005, vol. 36A, pp. 333-343.10.1007/s11661-005-0306-x ↗
8. F. Abe, M. Tabuchi, M. Kondo and S. Tsukamoto: International Journal of Pressure Vessels and Piping, 2007, vol. 84, pp. 44-52.10.1016/j.ijpvp.2006.09.013 ↗
9. F. Abe, M. Tabuchi, S. Tsukamoto, and T. Shirane: International Journal of Pressure Vessels and Piping, 2010, vol. 87, pp. 598-604.10.1016/j.ijpvp.2010.08.005 ↗
10. Metallic Materials: Uniaxial Creep Testing in Tension: Method of Test, JIS Z 2271:2010, Japanese Industrial Standards Association, Tokyo, 2010.
11. H. Hongo, M. Tabuchi, and T. Watanabe: Metallurgical and Materials Transactions A, 2012, vol. 43A, pp. 1163-1173.10.1007/s11661-011-0967-6 ↗
12. M. Tabuchi and H. Hongo: Materials at High Temperatures, 2011, vol. 28, pp. 172-180.10.1179/096034011X13123540966196 ↗
13. T. Maki, H. Morimoto, and I. Tamura: Tetsu-To-Hagane, 1979, vol. 65, pp. 1598–1606 (in Japanese).10.2355/tetsutohagane1955.65.10_1598 ↗
14. T. Azuma, K. Miki, Y. Tanaka, and T. Ishiguro: Tetsu-To-Hagane, 2000, vol. 86, pp. 667–73 (in Japanese).10.2355/tetsutohagane1955.86.10_667 ↗
15. T. Shirane, S. Tsukamoto, K. Tsuzaki, Y. Adachi, T. Hanamura, M. Shimizu and F. Abe: Science and Technology of Welding and Joining, 2009, vol. 14, pp.698-707.10.1179/136217109X12505932584853 ↗
16. M. Tabuchi, A.T. Yokobori, Jr., R. Sugiura, M. Yatomi, A. Fuji and K. Kobayashi: Engineering Fracture Mechanics, 2010, vol. 77, pp. 3066-3076.10.1016/j.engfracmech.2010.03.044 ↗
17. N. Takahashi, T. Fujita, and T. Yamada: Tetsu-To-Hagane, 1975, vol. 61, pp. 2263–73 (in Japanese).10.2355/tetsutohagane1955.61.9_2263 ↗
18. P. Hofer, M.K. Miller, S.S. Babu, S.A. David, and H. Cerjak: Metallurgical and Materials Transactions A, 2000, vol. 31A, pp. 975-984.10.1007/s11661-000-1015-0 ↗
19. T. Horiuchi, M. Igarashi, and F. Abe: ISIJ International, 2002, vol. 42, Supplement, pp. S67-S71.10.2355/isijinternational.42.Suppl_S67 ↗
20. T.H. Hyde, W. Sun, and A.A. Becker: International Journal of Pressure Vessels and Piping, 2001, vol. 78, pp. 765-771.10.1016/S0308-0161(01)00088-6 ↗
21. S.T. Tu, P. Segle, and J.M. Gong: International Journal of Pressure Vessels and Piping, 2004, vol. 81, pp. 199-209.10.1016/j.ijpvp.2003.11.010 ↗