Evolution of crystallographic texture during equal channel angular extrusion of copper: The role of material variables
Source abstract
Abstract
The evolution of crystallographic texture during equal channel angular extrusion (ECAE) using route A has been investigated experimentally as well as by simulations for three types of materials: pure, commercially pure, and impure (cast) copper. The ECAE texture of copper can be compared with simple shear textures. However, there are deviations in terms of location of the respective components. These differences can be nearly reproduced using a recent flow line approach for ECAE deformation (L.S. Toth, R. Arruffat-Massion, L. Germain, S.C. Baik, and S. Suwas: Acta Mater., 2004, Vol. 52, pp. 1885-98) with the help of the viscoplastic self-consistent polycrystal model. The main texture components common to all three materials are $A_1_E$ and $B_E/\overline{B}_E$; the latter ones are significantly stronger in the cast material. The effect of further deformation on texture modification depends on material variables, such as purity, initial microstructure, and texture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. V.M. Segal: Mater. Sci. Eng. A, 1995, vol. A97, pp. 157–64.10.1016/0921-5093(95)09705-8 ↗
2. R.Z. Valiev: Mater. Sci. Eng. A, 1997, vols. A234–A236, pp. 59–66.10.1016/S0921-5093(97)00183-4 ↗
3. V.M. Segal: Mater. Sci. Eng. A, 1999, vol. A271, pp. 322–33.10.1016/S0921-5093(99)00248-8 ↗
4. I.V. Alexandrov, Y.T. Zhu, T.C. Lowe, R.K. Islamgaliev, and R.Z. Valiev: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1047–58.
5. Y.T. Zhu and T.C. Lowe: Mater. Sci. Eng. A, 2000, vol. A291, pp. 46–53.10.1016/S0921-5093(00)00978-3 ↗
6. C. Pithan, T. Hashimoto, M. Kawazoe, J. Nagahora, and K. Higashi: Mater. Sci. Eng. A, 2000, vol. A280, pp. 62–68.10.1016/S0921-5093(99)00657-7 ↗
7. S.R. Terhune, D.L. Swisher, K. Oh-Ishi, Z. Horita, T.G. Langdon, and T.R. McNelley: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2173–84.10.1007/s11661-002-0049-x ↗
8. A. Gholinia, P. Bate, and P.B. Prangnell: Acta Mater., 2002, vol. 50, pp. 2121–36.10.1016/S1359-6454(02)00055-1 ↗
9. V.M. Segal: Mater. Sci. Eng. A, 2002, vol. 338, pp. 331–44.10.1016/S0921-5093(02)00066-7 ↗
10. W.H.C. Huang, L. Chang, P.W. Hao, and C.P. Chang: Mater. Sci. Eng. A, 2001, vol. A307, pp. 113–18.10.1016/S0921-5093(00)01881-5 ↗
11. I. Kopacz, M. Zehetbauer, L.S. Tóth, I.V. Alexandrov, and B. Ortner: Proc. 22nd Risø Symp. on Science of Nanocrystalline and Metastable Alloys, Structure Properties and Modelling, Dinesen et al., ed., Risø National Laboratory, Roskilde, Denmark, 2001, pp. 295–300.
12. L.S. Tóth, M. Zehetbauer, I. Kopacz, and I.V. Alexandrov: Proc. THERMEC’ 2000, Las Vegas, NV, Dec. 4–8, 2000, Elsevier, J. Mat. Proc. Techn., on CD only: ISBN 0080440266.
13. S. Ferrasse, V.M. Segal, S.R. Kalidindi, and F. Alford: Mater. Sci. Eng. A, 2004, vol. 368, pp. 28–40.10.1016/j.msea.2003.09.077 ↗
14. S. Li, I.J. Beyerlin, C.T. Necker, D.J. Alexander, and M. Bourke: Acta Mater., 2004, vol. 52, pp. 4859–75.10.1016/j.actamat.2004.06.042 ↗
15. S. Li, I.J. Beyerlin, D.J. Alexander, and S.C. Vogel: Acta Mater., 2005, vol. 53, pp. 2111–25.10.1016/j.actamat.2005.01.023 ↗
16. M. Haouaoui, K.T. Hartwig, and E.A. Payzant: Acta Mater., 2005, vol. 53, pp. 801–10.10.1016/j.actamat.2004.10.032 ↗
17. L.S. Tóth, R. Arruffat-Massion, L. Germain, S.C. Baik, and S. Suwas: Acta Mater., 2004, vol. 52, pp. 1885–98.10.1016/j.actamat.2003.12.027 ↗
18. S.C. Baik, Y. Estrin, H.S. Kim, and R.J. Helmig: Mater. Sci. Eng., A, 2003, vol. 351, pp. 86–97.10.1016/S0921-5093(02)00847-X ↗
19. W. Skrotzki, R. Tamm, R. Klemm, E. Thiele, C. Holste, and H. Baum: Mater. Sci. Forum, 2002, vols. 408–412, pp. 667–72.10.4028/www.scientific.net/MSF.408-412.667 ↗
20. S. Suwas, L.S. Tóth, J.-J. Fundenburger, A. Eberhardt, and W. Skrotzki: Scripta Mater., 2003, vol. 49, pp. 1203–08.10.1016/j.scriptamat.2003.08.011 ↗
21. M.A. Gibbs, K.T. Hartwig, L.R. Cornwell, R.E. Goforth, and E.A. Payzant: Scripta Mater., 1998, vol. 39, pp. 1699–1704.10.1016/S1359-6462(98)00384-4 ↗
22. S.R. Agnew: Proc. 12th Int. Conf. on Texture of Materials (ICO-TOM-12), J.A. Szpunar, ed., NRC Research Press, Ottawa, 1999, pp. 575–80.
23. P. Van Houtte: ODF MTM-FHM Software, version 2000.
24. H.J. Bunge: Texture Analysis in Materials Science, Butterworth and Co., London, 1982.
25. F. Montheillet, M. Cohen, and J.J. Jonas: Acta Metall., 1984, vol. 32, pp. 2077–89.10.1016/0001-6160(84)90187-1 ↗
26. A. Molinari and L.S. Tóth: Acta Metall. Mater., 1994, vol. 42, pp. 2453–53.10.1016/0956-7151(94)90324-7 ↗
27. L.S. Tóth, A. Molinari, and Y. Estrin: J. Eng. Mater. Technol., 2002, vol. 124, pp. 71–77.10.1115/1.1421350 ↗
28. I.J. Beyerlein, R.A. Lebensohn, and C.N. Tome: Mater. Sci. Eng., A, 2003, vol. 345, pp. 122–38.10.1016/S0921-5093(02)00457-4 ↗
29. Y. Estrin, L.S. Tóth, Y. Brechet, and H.S. Kim: NanoSPD3 Conf., Fukuoka, Japan, Sept. 2005, in press.
30. S.R. Agnew, U.F. Kocks, K.T. Hartwig, and J.R. Weertman: Proc. 19th Riso. Int. Symp. on Materials Science, Roskilde, Denmark, 1998, pp. 201–06.
31. L.S. Tóth: Adv. Eng. Mater., 2003, vol. 5, pp. 308–16.10.1002/adem.200310084 ↗
32. D.H. Hughes, R.A. Lebenson, H.-R. Wenk, and A. Kumar: Proc. R. Soc. London A, 2000, vol. 456, pp. 921–53.10.1098/rspa.2000.0543 ↗
33. L.S. Tóth, K.W. Neale, and J.J. Jonas: Acta Metall., 1989, vol. 37, pp. 2197–210.10.1016/0001-6160(89)90145-4 ↗
34. L.S. Tóth, P. Gilormini, and J.J. Jonas: Acta Metall., 1988, vol. 36, pp. 3077–91.10.1016/0001-6160(88)90045-4 ↗
35. L.S. Tóth, J.J. Jonas, D. Daniel, and J.A. Bailey: Text. Microstr., 1992, vol. 19, pp. 245–62.10.1155/TSM.19.245 ↗
36. J.J. Jonas and L.S. Tóth: Scripta Metall. Mater, 1992, vol. 27, pp. 1575–80.10.1016/0956-716X(92)90147-7 ↗
37. P. Van Houtte: Acta Metall., 1978, vol. 26, pp. 591–604.10.1016/0001-6160(78)90111-6 ↗
38. L.S. Toth, I. Beyerlin, C.N. Tomé, and S. Suwas: unpublished research, 2005.
39. T. Leffers, D. Juul Jensen, and N. Hansen: Proc. 8th Int. Conf. on Texture of Materials (ICOTOM-8), Santa Fe, NM, 1988, J.S. Kallend and G. Gottstein, eds., TMS, Warrendale, PA, 1987, pp. 449–54.
40. T. Öztürk, J.S. Kallend, and G.J. Davies: Proc. 6th Int. Conf. on Texture of Materials (ICOTOM-6), S. Nagashima, ed., The Iron and Steel Institute of Japan, Tokyo, 1982, pp. 507–15.
41. H. Conrad: Mater. Sci. Eng. A, 2003, vol. 241, pp. 216–28.10.1016/S0921-5093(02)00238-1 ↗
42. A.J. Beaudoin, A. Acharya, S.R. Chen, D.A. Korzekwa, and M.G. Stout: Acta Mater., 2000, vol. 48, pp. 3409–23.10.1016/S1359-6454(00)00136-1 ↗