journal article·2015-07

Decoupling Thermal and Electrical Effect in an Electrically Assisted Uniaxial Tensile Test Using Finite Element Analysis

Krishnaswamy Hariharan, Myoung-Gyu Lee, Moon-Jo Kim, Heung Nam Han, Daeyong Kim, Seogou Choi

Publisher page

Abstract

Application of intermittent electric pulses during uniaxial tensile test changes the mechanical behavior owing to electroplastic effect. The electric current increases the temperature of the specimen due to Joule heating. It is, therefore, necessary to decouple the thermal effect from the overall behavior to understand the contribution of electric current in the mechanical behavior. In the present work, an electro-thermo-mechanical finite element study of an electrically assisted uniaxial tensile test of Al5052 alloy is performed to isolate the thermal effect. The simulated results yielded the thermal effect due to the electric current. By comparing the experimental and simulated results, the contribution of electric current is decoupled from that of thermal effect. It is found that the thermal component contributes significantly to the instantaneous stress drop and long-range permanent softening observed in experiment. The electric current, in addition to the instantaneous stress drop and permanent softening, affects the reloading behavior. The present work can be utilized to develop simpler constitutive models for the mechanical behavior of metals subjected to pulsed electric current.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic Effects on Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. De Cooman, B. C., Chin, K. & Kim, J: New Trends Dev. Automot. Syst. Eng. 1001–128 (2011). doi:Export Date 9 December 2013.
2. Hariharan, K., Balachandran, G. & Prasad, M. S: Mater. Manuf. Process. 24, 1442–1452 (2009).10.1080/10426910903179989 ↗
3. Bok, H. H., Choi, J., Barlat, F., Suh, D. W. & Lee, M. G: Int. J. Plast. 58, 154–183 (2014).10.1016/j.ijplas.2013.12.002 ↗
4. O. Majidi, F. Barlat, M.-G. Lee, and D.-J. Kim: Steel Res. Int., 2014, vol. 86, pp. 98–109.10.1002/srin.201400001 ↗
5. Oliveira, D. A., Worswick, M. J., Finn, M. & Newman, D: J. Mater. Process. Technol. 170, 350–362 (2005).10.1016/j.jmatprotec.2005.04.118 ↗
6. Hariharan, K., Nguyen, N.-T., Chakraborti, N., Lee, M.-G. & Barlat, F.: Steel Res. Int. 85, 1597–1607 (2014).10.1002/srin.201300471 ↗
7. J. Roth, (Mckean, P. (US)), and J. Cao (Wilmette, I. (US)). Electrical-Assisted Double Side Incremental Forming Processes Thereof, 2012.
8. J.S. Andrawes,T.J. Kronenberger, T.A. Perkins, J.T. Roth, and R.L. Warley: Mater. Manuf. Process., 2007, vol. 22, pp. 91–101.10.1080/10426910601016004 ↗
9. Conrad, H: Mater. Sci. Eng. A 287, 276–287 (2000).10.1016/S0921-5093(00)00786-3 ↗
10. Sprecher, A. F., Mannan, S. L. & Conrad, H: Acta Metall. 34, 1145–1162 (1986).10.1016/0001-6160(86)90001-5 ↗
11. J.J. Jones: Flow Behavior Modeling and Process Control of Electrically—Assisted Forming (EAF) for Sheet Metals in Uniaxial Tension, (Clemson University, 2012).
12. Dubinko, V. I. & Klepikov, V. F.: Bull. Russ. Acad. Sci. Phys. 72, 1188–1189 (2008).10.3103/S1062873808090037 ↗
13. Dzialo, C. M., Siopis, M. S., Kinsey, B. L. & Weinmann, K. J.: CIRP Ann. - Manuf. Technol. 59, 299–302 (2010).10.1016/j.cirp.2010.03.014 ↗
14. Fan, R., Magargee, J., Hu, P. & Cao, J.: Mater. Sci. Eng. A 574, 218–225 (2013).10.1016/j.msea.2013.02.066 ↗
15. Roh, J.-H., J.-J. Seo, S.-T. Hong, M.-J. Kim, H.N. Han, and J.T. Roth: Int. J. Plast. 58, 84–99 (2014).10.1016/j.ijplas.2014.02.002 ↗
16. M.-J. Kim, K. Lee, K.H. Oh, I.-S. Choi, H.-H. Yu, S.-T. Hong, and H.N. Han: Scripta Mater. 75, 58–61 (2014).10.1016/j.scriptamat.2013.11.019 ↗
17. C.R. Green, T.A. McNeal, J.T. Roth, P.S. Erie, and T.B. College: Trans. North Am. Manuf. Res. Inst. SME, 2009, vol. 37, pp. 403–410.
18. Jones, J. J., Mears, L. & Roth, J. T.: J. Manuf. Sci. Eng. 134, 034504 (2012).10.1115/1.4006547 ↗
19. Magargee, J., Morestin, F. & Cao, J.: J. Eng. Mater. Technol. 135, 041003 (2013).10.1115/1.4024394 ↗
20. Okazaki, K., Kagawa, M. & Conrad, H: Mater. Sci. Eng. 45, 109–116 (1980).10.1016/0025-5416(80)90216-5 ↗
21. Kopanev, A. A: Strength Mater. 23, 55–59 (1991).10.1007/BF00769953 ↗
22. Yang, D. & Conrad, H.: Intermetallics 9, 943–947 (2001).10.1016/S0966-9795(01)00094-2 ↗
23. W. Zhang, M.L. Sui, K.Y. Hu, D.X. Li, X.N. Guo, G.H. He, and B.L. Zhou: Formation of nanophases in a Cu–Zn alloy under high current density electropulsing. J. Mater. Res. 15, 2065–2068 (2000).10.1557/JMR.2000.0295 ↗
24. Siopis, M. S. & Kinsey, B. L: J. Manuf. Sci. Eng. 132, 021004 (2010).10.1115/1.4001039 ↗
25. Jones, J. J. & Mears, L.: J. Manuf. Sci. Eng. 135, 021011–1 to 021011–11 (2013).
26. X. Chu, L. Leotoing, D. Guines, and E. Ragneau: IDDRG 2014 Conf., 2014, vol. 33, pp. 1–5.
27. Aluminium 5052-H32 Properties. ASM Matweb at .
28. S. Lundberg: Material Aspects of Fire Design (Lectire: 2502), in Training in Aluminium Application Technologies (TALAT), 1997, at .
29. W.A. Salandro, C.J. Bunget, and L. Mears: Proc. Inst. Mech. Eng., Part B: J. Eng. Manuf., 2012, vol. 226 (5), pp. 775–88.10.1177/0954405411424696 ↗
30. Kronenberger, T. J., Johnson, D. H. & Roth, J. T: J. Manuf. Sci. Eng. 131, 031003 (2009).10.1115/1.3090833 ↗