journal article·2011-08

Phase-Field Modeling of Austenite Formation from a Ferrite plus Pearlite Microstructure during Annealing of Cold-Rolled Dual-Phase Steel

J. Rudnizki, B. Böttger, U. Prahl, W. Bleck

Publisher page

Abstract

The prediction of microstructure and, consequently, of mechanical properties, as a function of chemical composition and heat treatment parameters, is currently a major topic of scientific investigations. There has been considerable effort to investigate the phase transformation during cooling and its modeling. In comparison, the metallurgical processes of the ferrite-austenite transformation during heating and annealing have not been intensively studied. However, the austenite formation during heating and annealing has a great influence on the final microstructure, as it is one of the first steps in the complex microstructure development of modern high-strength strip steels. In this study, the simulation of austenite formation from a ferrite plus pearlite microstructure during heating is realized by means of a multiphase-field approach. For the description of pearlite dissolution, a simple pseudo-phase approximation is used, which neglects the substitutional elements. Instead, the modeling of austenite formation from ferrite is performed as a second step, taking into account the substitutional elements under LE negligible partitioning (LENP) conditions, using direct coupling to a commercial thermodynamic database. The results of these two-dimensional (2-D) simulations will be presented and compared with experimental findings.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. G.R. Speich and A. Szirmae: Trans. TMS-AIME, 1969, vol. 245, pp. 1063–74.
2. M. Hillert, K. Nilsson, and L.-E. Törndahl: J. Iron Steel Inst., 1971, vol. 1, pp. 49–66.
3. A. Roosz, Z. Gacsi, and G. Fuchs: Acta Metall., 1983, vol. 31, pp. 509–17.10.1016/0001-6160(83)90039-1 ↗
4. X.L. Cai, A.J. Garratt, and W.S. Owen: Metall. Trans. A, 1985, vol. 16A, pp. 543–56.10.1007/BF02814228 ↗
5. C.I. Garcia and A.J. Deardo: Metall. Trans. A, 1981, vol. 12A, pp. 521–30.10.1007/BF02648551 ↗
6. F.G. Caballero, C. Capdevila, and C. Garcia de Andres: ISIJ Int., 2001, vol. 41, pp. 1093–1102.10.2355/isijinternational.41.1093 ↗
7. R.C. Dykhuizen, C.V. Robino, and G.A. Knorovsky: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 107–17.10.1007/s11663-999-0011-z ↗
8. G.R. Speich, V.A. Demarest, and R.L. Miller: Metall. Trans. A, 1981, vol. 12A, pp. 1419–28.10.1007/BF02643686 ↗
9. F.G. Caballero, C. Capdevila, and C. Garcia de Andres: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1283–91.10.1007/s11661-001-0218-3 ↗
10. K.W. Andrews: J. Iron Steel Inst., 1965, vol. 7, pp. 721–27.
11. THERMO-CALC Software: http://www.thermocalc.com
12. M. Hillert: Phase Equilibria, Phase Diagrams and Phase Transformations, University Press, Cambridge, United Kingdom, 1998.
13. M. Hillert: Scripta Mater., 2004, vol. 50, pp. 697–99.10.1016/j.scriptamat.2003.11.020 ↗
14. G. Inden and C.R. Hutchinson: Interfacial Conditions at the Moving Interface during Growth of Ferrite from Austenite in Fe-C-(X) Alloys, ISS and TMS, Warrendale, PA, 2003, pp. 65–79.
15. N. Saunders and A. Miodownik: CALPHAD Calculation of Phase Diagrams: a Comprehensive Guide, Elsevier, New York, NY, 1998.
16. I. Steinbach, F. Pezzolla, B. Nestler, M. Seeßelberg, R. Prieler, G.J. Schmitz, and J.L.L. Rezende: Phys. D, 1996, vol. 94, pp. 135–47.10.1016/0167-2789(95)00298-7 ↗
17. B. Böttger, U. Grafe, D. Ma, and S.G. Fries: Mater. Sci. Technol., 2000, vol. 16, pp. 1425–28.10.1179/026708300101507398 ↗
18. J. Eiken, B. Böttger, and I. Steinbach: Phys. Rev. E, 2006, vol. 73, p. 066122.10.1103/PhysRevE.73.066122 ↗
19. B. Böttger, M. Apel, J. Eiken, P. Schaffnit, and I. Steinbach: Steel Res. Int., 2008, vol. 79, pp. 608–16.10.1002/srin.200806173 ↗
20. J. Eiken: Int. J. Mater. Res., 2010, vol. 101 (4), pp. 503–09.10.3139/146.110302 ↗
21. N. Warnken, D. Ma, M. Mathes, and I. Steinbach: Mater. Sci. Eng. A, 2005, vol. 413 (12), pp. 267–71.10.1016/j.msea.2005.09.067 ↗
22. http://www.micress.de
23. ThermoTech: http://www.sentesoftware.co.uk
24. R.G. Thiessen: Ph.D. Thesis, TU Delft, Delft, 2006.