journal article·2013-04

β-Ti Alloys with Low Young’s Moduli Interpreted by Cluster-Plus-Glue-Atom Model

Qing Wang, Chunjun Ji, Yingmin Wang, Jianbing Qiang, Chuang Dong

Publisher page

Abstract

β-Ti bio-alloys with low Young’s moduli (E) require multiple alloying using both BCC stabilizers and low-E elements. In this study, the cluster-plus-glue-atom model was introduced in the composition interpretation and design of Ti-based (Ti,Zr)-(Mo,Sn)-Nb alloys. Alloying elements are grouped according to their enthalpies of mixing with Ti, forming a general cluster formula [(Mo,Sn)(Ti,Zr)14]Nb1 or 3, where the square brackets enclose the nearest neighbor coordination polyhedron cluster CN14 of the BCC structure and Nb is the glue atom. The formulated compositions could reach simultaneously low E and high β-Ti structural stabilities, as exemplified by [(Mo0.5Sn0.5)(Ti13Zr)]Nb1 which had a Young’s modulus as low as 48 GPa in the suction-cast state.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. M. Long and H.J. Rack: Biomaterials, 1998, vol. 19, pp. 1621–39.10.1016/S0142-9612(97)00146-4 ↗
2. M. Geetha, A.K. Singh, R. Asokamani, and A.K. Gogia: Prog. Mater. Sci., 2009, vol. 54, pp. 397–425.10.1016/j.pmatsci.2008.06.004 ↗
3. T. Saito, T. Furuta, J.H. Hwang, S. Kuramoto, K. Nishino, N. Suzuki, R. Chen, A. Yamada, K. Ito, Y. Seno, T. Nonaka, H. Ikehata, N. Nagasako, C. Iwamoto, Y. Ikuhara and T. Sakuma: Science, 2003, vol. 300, pp. 464–67.10.1126/science.1081957 ↗
4. Q. Yao, H. Xing, L.J. Meng and J. Sun: Acta Metall. Sin., 2008, vol. 44, pp. 19–22.
5. K. Wang: Mater. Sci. Eng. A, 1996, vol. 213, pp. 134–37.10.1016/0921-5093(96)10243-4 ↗
6. A. Schuh, J. Bigoney, W. Hönle, G. Zeiler, U. Holzwarth and R. Forst: Mat. wissu Werkstofftech, 2007, vol. 38, pp. 1003–07.10.1002/mawe.200700230 ↗
7. L.J. Xu and Y.Y. Chen: J. Alloys Compd., 2008, vol. 453, pp. 320–24.10.1016/j.jallcom.2006.11.144 ↗
8. L.J. Huang: Ph.D. Thesis, Beijing Institute of Aeronautical Material, 2006.
9. M. Niinomi: Mater. Sci. Eng. A, 1998, vol. 243, pp. 231–36.10.1016/S0921-5093(97)00806-X ↗
10. D.Q. Martins, W.R. Osório, M.E.P. Souza, R. Caram, and A. Garcia: Electrochim. Acta, 2008, vol. 53, pp. 2809–17.10.1016/j.electacta.2007.10.060 ↗
11. T. Kasuga, M. Nogami, M. Niinomi and T. Hattori: Biomaterials, 2003, vol. 24, pp. 2673–83.10.1016/S0142-9612(03)00069-3 ↗
12. Y.L. Hao, S.J. Li, S.Y. Sun, C.Y. Zheng, Q.M. Hu, and R. Yang: Appl. Phys. Lett., 2005, vol. 87, p. 091906.10.1063/1.2037192 ↗
13. P.J. Bania, ed.: in Beta Titanium Alloys in the 1990s, TMS, Warrendale, PA, 1993.
14. M. Abdel-Hady, K. Hinoshita, and M. Morinaga: Scripta Mater., 2006, vol. 55, pp. 477–80.10.1016/j.scriptamat.2006.04.022 ↗
15. E.W. Collings, eds.: in Physical Metallurgy of Titanium Alloys, ASM, Metals Park, OH, 1984.
16. C. Dong, Q. Wang, J.B. Qiang, Y.M. Wang, N. Jiang, G. Han, Y.H Li, J. Wu and J.H. Xia: J. Phys. D. Appl. Phys., 2007, vol. 40, pp. 273–91.10.1088/0022-3727/40/15/R01 ↗
17. J. Zhang, Q. Wang, Y.M. Wang, C.Y. Li, L.S. Wen, and C. Dong: J. Mater. Res., vol. 25, pp. 328–36.10.1557/JMR.2010.0041 ↗
18. J. Singh, P. Singh, S.K. Pattan, and S. Prakash: Phys. Rev. B, 1994, vol. 49, 932–43.10.1103/PhysRevB.49.932 ↗
19. C.P. Hao, Q. Wang, R.T. Ma, Y.M. Wang, J.B. Qiang, and C. Dong: Acta. Phys. Sin., 2011, vol. 60, 116101.10.7498/aps.60.116101 ↗
20. A. Takeuchi and A. Inoue: Mater. Trans. JIM, 2000, vol. 41, 1372–78.10.2320/matertrans1989.41.1372 ↗
21. Y.B. Zhou, ed.: Titanium Alloy Casting, Aviation Industry Press, Beijing, 2000.