Effect of Alclad Layer on Material Flow and Defect Formation in Friction-Stir-Welded 2024 Aluminum Alloy
Source abstract
Abstract
The effect of the Alclad layer on material flow and defect formation during friction-stir welding (FSW) of 6.5-mm-thick 2024Al-T351 alloy plates was investigated. To characterize the material flow during FSW, different cross sections of the keyhole and “stop-action weld” were made for metallographic observations. It was found that the top Alclad assembled at the shoulder/workpiece interface, thereby weakening the material flow in the shoulder-driven zone and favoring the formation of void defect at high traveling speeds. The bottom Alclad layer extended into the weld at excess material flow state, which could be avoided at balanced material flow state. A conceptual model of material flow was proposed to describe the formation of the weld. It was indicated that a perfect FSW joint of Alclad 2024Al alloy without defect could be obtained at an optimum FSW condition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. D.Y. Jeong, O. Orringer, and G.C. Sih: Theor. Appl. Fract. Mech., 1995, vol. 22, pp. 127-37.10.1016/0167-8442(94)00053-4 ↗
2. D. Fersini and A. Pirondi: Eng. Fract. Mech., 2007, vol. 74, pp. 468-80.10.1016/j.engfracmech.2006.07.010 ↗
3. L. Commin, M. Dumont, J.E. Masse, and L. Barrallier: Acta Mater., 2009, vol. 57, pp. 326-34.10.1016/j.actamat.2008.09.011 ↗
4. R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng. R, 2005, vol. 50R, pp. 1-78.10.1016/j.mser.2005.07.001 ↗
5. M.A. Sutton, B. Yang, A.P. Reynolds, and R. Taylor: Mater. Sci. Eng. A., 2002, vol. 323, pp. 160-66.10.1016/S0921-5093(01)01358-2 ↗
6. C. Genevois, A. Deschamps, A. Denquin, and B. Doisneau-Cottignies: Acta Mater., 2005, vol. 53, pp. 2447-58.10.1016/j.actamat.2005.02.007 ↗
7. M.J. Jones, P. Heurtier, C. Desrayaud, F. Montheillet, D. Allehaux, and J.H. Driver: Scripta Mater., 2005, vol. 52, pp. 693-97.10.1016/j.scriptamat.2004.12.027 ↗
8. R. Talwar, D. Bolser, R. Lederich, and J. Baumann: 4 th Int. Symp. Friction Stir Welding, Park City, UT, 2003.
9. A.P. Reynolds: Scripta Mater., 2008, vol. 58, pp. 338-42.10.1016/j.scriptamat.2007.10.048 ↗
10. K. Colligan: Weld J., 1999, vol. 78, pp. 229-37.
11. T.U. Seidel and A.P. Reynolds: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2879-84.10.1007/s11661-001-1038-1 ↗
12. S.W. Xu and X.M. Deng: Acta Mater., 2008, vol. 56, pp. 1326-41.10.1016/j.actamat.2007.11.016 ↗
13. M. Guerra, C. Schmidt, J.C. McClure, L.E. Murr, and A.C. Nunes: Mater. Charact., 2003, vol. 49, pp. 95-101.10.1016/S1044-5803(02)00362-5 ↗
14. H.N.B. Schmidt, T.L. Dickerson, and J.H. Hattel: Acta Mater., 2006, vol. 54, pp. 1199-1209.10.1016/j.actamat.2005.10.052 ↗
15. R.M. Leal, C. Leitao, A. Loureiro, D.M. Rodrigues, and P. Vilac: Mater. Sci. Eng. A, 2008, vol. 498, pp. 384-91.10.1016/j.msea.2008.08.018 ↗
16. O. Lorrain, V. Favier, H. Zahrouni, and D. Lawrjaniec: J. Mater. Process. Tech., 2010, vol. 210, pp. 603-09.10.1016/j.jmatprotec.2009.11.005 ↗
17. K. Kumar and S.V. Kailas: Mater. Sci. Eng. A. 2008, vol. 485, pp. 367-74.10.1016/j.msea.2007.08.013 ↗
18. H.W. Zhang, Z. Zhang, and J.T. Chen: J. Mater. Res., 2007, vol. 183, pp. 62-70.
19. H. Schmidt and J. Hattel: Proc. Symp. Friction Stir Welding Process. III, TMS, Warrendale, PA, 2005, pp. 225-32.
20. W.J. Arbegast: Scripta Mater., 2008, vol. 58, pp. 372-76.10.1016/j.scriptamat.2007.10.031 ↗
21. Z.W. Chen, T. Pasang, and Y. Qi: Mater. Sci. Eng. A, 2008, vol. 474, pp. 312-16.10.1016/j.msea.2007.05.074 ↗
22. K. Kumar and S.V. Kailas: Mater. Sci. Eng. A, 2008, vol. 485, pp. 367-74.10.1016/j.msea.2007.08.013 ↗
23. S. Mandal, J. Rice, and A.A. Elmustafa: J. Mater. Process. Tech., 2008, vol. 203, pp. 411-19.10.1016/j.jmatprotec.2007.10.067 ↗
24. A. Gerlich, M. Yamamoto, and T.H. North: J. Mater. Sci., 2008, vol. 43, pp. 2-11.10.1007/s10853-007-1791-7 ↗
25. A. Gerlich, G. Avramovic–Cingara, and T.H. North: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2773-86.10.1007/BF02586110 ↗