journal article·2007-05

An In-Situ Scanning Electron Microscopy Study of the Bonding between MnS Inclusions and the Matrix during Tensile Deformation of Hot-Rolled Steels

S. B. Hosseini, C. Temmel, B. Karlsson, N.-G. Ingesten

Publisher page

Abstract

The bonding between manganese sulfide (MnS) inclusions and the surrounding steel matrix was investigated by in-situ tensile testing in a scanning electron microscope (SEM) at room temperature. Tests were carried out for two different orientations of the inclusions with respect to the loading axis. The orientation was created during a hot cross rolling operation of the test material. Straining was performed along both longitudinal (L) and short transverse (S) directions. The investigation showed that the bond between the MnS inclusions and the matrix is weak. This was particularly seen in the S test direction where the sulfides, lying perpendicular to the load axis, delaminated from the matrix at very low applied stresses. The MnS inclusions in longitudinal tests instead fractured at high stress levels close to the yield stress.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. R. Kiessling and N. Lange: Non-Metallic Inclusions in Steel (Parts-IV), 2nd ed., The Metals Society, London, 1978, pp. 60, 104, 118, and 162
2. C. Temmel, B. Karlsson, N.-G. Ingesten: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2995–300710.1007/s11661-006-0181-0 ↗
3. D. Brooksbank, K.W. Andrews: J. Iron Steel Inst., 1972, vol. 210, pp. 246–55
4. C. Kaynak, A. Ankara, T.J. Baker: Mater. Sci. Technol. (UK), 1996, vol. 12, pp. 557–6210.1179/mst.1996.12.7.557 ↗
5. ASM Handbook, vol. 10, Failure Analysis Prevention, 8th ed., ASM INTERNATIONAL, Metals Park, OH, 1975, pp. 291–95
6. Y. Murakami: Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions. Elsevier, Amsterdam, 2002, p. 369
7. S. Suresh: Fatigue of Materials, 2nd ed., Cambridge University Press, Cambridge, USA, 2004, p. 679
8. C.E. Sims and F.B. Dahle: Am. Foundrymen’s Assoc., Trans., 1938, vol. 46, pp. 65–132
9. S.B. Hosseini: Bonding between MnS Inclusions and the Steel Matrix, Chalmers University of Technology, Göteborg, Sweden, 2005
10. K. Karttunen: Numerical Investigation of Ductile Fracture Induced by MnS Inclusions, Chalmers University of Technology, Göteborg, Sweden, 2005
11. http://www.chalmers.se/mmt/SV/forskning/materialteknologi/projekt/publikation-av-s-b
12. W. Roberts, B. Lehtinen, K.E. Easterling: Acta Metall., 1976, vol. 24, pp. 745–5810.1016/0001-6160(76)90109-7 ↗
13. F. Beremin: Metall. Trans. A, 1981, vol. 12A, p. 72310.1007/BF02648336 ↗
14. A.A. Benzegra, J. Besson, A. Pineau: Acta Mater. Inc., 2004, vol. 52, pp. 4623–3810.1016/j.actamat.2004.06.020 ↗
15. G.R. Speich, W.A. Spitzig: Metall. Trans. A, 1982, vol. 13A, pp. 2239–5810.1007/BF02648395 ↗
16. W.C. Leslie: ISS Trans., 1983, vol. 2, pp. 1–24