The behavior of silicon in the solidification of Zn-55Al-1.6Si coating on steel
Source abstract
Abstract
Silicon is an essential element in the Zn-55Al-1.6Si coating. It is added to promote the formation of an adherent coating and prevent the excessive growth of an intermetallic alloy layer at the steel/coating interface. The addition of silicon also results in the formation of a silicon phase distributed in the interdendritic region of the overlay, having a flowery pattern on the surface, and appearing needlelike when observed inside the overlay. The behavior of silicon during the solidification process of the Zn-55Al-1.6Si coating is examined in the current study. It is found that the coating solidification proceeds in three stages. At stage I, primary α-Al dendrites develop at about 566 °C to 520 °C, forming the framework of the coating structure. This is followed by stage II at about 520 °C to 381 °C, where the binary Al-Si eutectic reaction takes place, with the majority of the silicon phase forming at about 520 °C to 480 °C. At stage III the remaining molten phase undergoes a ternary Al-Zn-Si eutectic reaction forming the interdendritic zinc-rich network. The ternary Al-Zn-Si eutectic reaction is essentially equivalent to the binary Al-Zn eutectic reaction because of the very low level of silicon at the Al-Zn-Si eutectic point.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. H.E. Townsend and A.R. Borzillo: Galvatech ’95 Conf. Proc., Chicago, IL, 1995, ISS, Warrendale, PA, 1995, pp. 171–77.
2. D.J. Willis: Proc. 4th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (GALVATECH ’98), Iron and Steel Institute of Japan, Chiba, 1998, pp. 337–42.
3. R. Ley: BIEC International Inc., Vancouver, WA, unpublished data, 2002.
4. H.E. Townsend: ASM Handbook, vol. 5, Surface Engineering, ASM INTERNATIONAL, Metals Park, OH, 1994, pp. 339–48.
5. 55 Pct Aluminum-Zinc Coated Steel Sheet Research and Technology Manual, BIEC International Inc., Vancouver, WA, 1995.
6. J.L. Murray: in Binary Alloy Phase Diagrams, 2nd ed., T.B. Massalski, H. Okamoto, P.R. Subramanian, and L. Kacprzak, eds., ASM INTERNATIONAL, Materials Park, OH, vol. 1, pp. 239–41.
7. A.R. Borzillo and J.B. Horton: U.S. Patent 3,343,930, 1967.
8. A.R. Borzillo and J.B. Horton: U.S. Patent 3,393,089, 1968.
9. J.H. Selverian, A.R. Marder, and M.R. Notis: Metall. Trans. A, 1988, vol. 19A, pp. 1193–1203.10.1007/BF02662580 ↗
10. J.B. Horton and A.R. Borzillo: U.S. Patent 3,952,120, 1976.
11. H. Cleary, J.B. Horton, and G.F. Melloy: U.S. Patent 3,782,909, 1974.
12. J.H. Selverian, A.R. Marder, and M.R. Motis: Metall. Trans. A, 1989, vol. 20A, pp. 543–55.10.1007/BF02653934 ↗
13. A.R. Marder: in Zinc-Based Steel Coating Systems: Metallurgy and Performance, G. Krauss and D.K. Matlock, eds., TMS, Warrendale, PA, 1990, pp. 55–82.
14. J.H. Selverian, M.R. Notis, and A.R. Marder: J. Mater. Eng., 1987, vol. 9, pp. 133–40.10.1007/BF02833702 ↗
15. H.J. Cleary: in Microstructural Science, D.O. Northwood, W.E. White, and G.F. Van der Voort, eds., ASM, Metals Park, OH, 1985, vol. 12, pp. 103–13.
16. B. Sundman: Thermo-Calc, Royal Institute of Technology, Stockholm, Nov. 1997.
17. N.J. Wall, J.A. Spittle, and R.D. Jones: Int. Conf. on Zinc Coated Steel Sheet, Zinc Development Association, Munich, Germany, 1985, pp. C/1-C/6.
18. Y. Fukui, M. Koda, and Y. Hirose: Tetsu-to-Hagané, 1991, vol. 77, pp. 939–46.10.2355/tetsutohagane1955.77.7_939 ↗
19. F.A. Fasoyinu and F. Weinberg: Can. Metall. Q., 1993, vol. 32, pp. 185–92.10.1179/cmq.1993.32.2.185 ↗
20. R.S. Patil, G.W. Henger, and R.J. Glatthorn: SAE Technical Paper Series 840211, Int. Congr. Expo, Detroit, MI, 1984.
21. R.Y. Chen and D.J. Willis: BlueScope Steel Research, Port Kambla, Australia, unpublished research, 2002.
22. A. Semoroz, Y. Durandet, and M. Rappaz: Acta Mater., 2001, vol. 49, pp. 529–41.10.1016/S1359-6454(00)00322-0 ↗
23. S. An Mey and K. Hack: Z. Metallkd., 1986, vol. 77, pp. 454–59.
24. T. Suzuki: in Ternary Alloys Volume 8: Al-Ni-Tb to Al-Zn-Zr, G. Petzow and G. Effenberg, eds., VCH, New York, NY, 1993, pp. 338–53.
25. M.C. Flemings: Solidification Processing, McGraw-Hill, New York, NY, 1974.