journal article·2010-05

Fatigue Behavior of Four High-Mn Twinning Induced Plasticity Effect Steels

A.S. Hamada, L.P. Karjalainen, A. Ferraiuolo, J. Gil Sevillano, F. de las Cuevas, G. Pratolongo, M. Reis

Publisher page

Abstract

Fatigue behavior of four high-Mn (18 to 22 wt pct Mn) steels, after cold rolling and soft annealing, were investigated in reversed plane bending in a high-cycle regime. The surfaces of fatigued specimens were examined using an optical microscope, a scanning electron microscope (SEM), and an atom force microscope (AFM). It was discovered that the chemical composition of the steel had only a minor influence on fatigue behavior, and the fatigue limit (FL), i.e., the stress amplitude leading to more than 2·106 cycles to failure, of all steels is about 400 MPa. This is about 42 to 48 pct of their tensile strength whose value is comparable to that of austenitic stainless steel and 780 MPa transformation induced plasticity (TRIP) steel. Mechanical twinning does not occur in the course of cycling; however, intense slip bands are formed. Fatigue cracks tend to nucleate at quite an early stage of fatigue life and most commonly on grain and annealing twin boundaries due to intersections of slip bands and boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. G. Frommeyer, U. Brüx, and P. Neumann: ISIJ Int., 2003, vol. 43, pp. 438–46.10.2355/isijinternational.43.438 ↗
2. S. Allain, J.-P. Chateau, O. Bouaziz, S. Migot, and N. Guelton: Mater. Sci. Eng. A, 2004, vols. 387–389, pp. 158–62.10.1016/j.msea.2004.01.059 ↗
3. O. Grässel, L. Krüger, G. Frommeyer, and W. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391–1409.10.1016/S0749-6419(00)00015-2 ↗
4. L. Krüger, W. Meyer, U. Brüx, G. Frommeyer, and O. Grässel: J. Phys. IV, 2003, vol. 110, pp. 189–94.10.1051/jp4:20020692 ↗
5. P. Cugy, A. Hildenbrand, M. Bouzekri, D. Cornette, S. Göklu, and H. Hofmann: 1st Int. Conf. Super-High Strength Steels, Rome, 2005.
6. D. Cornette, P. Cugy, A. Hildenbrand, M. Bouzekri, and G. Lovato: Rev. Metall., 2005, pp. 905–18.10.1051/metal:2005151 ↗
7. T. Niendorf, C. Lotze, D. Canadin, A. Frehn, and H.J. Maier: Mater. Sci. Eng. A, 2009, vol. 499, pp. 518–24.10.1016/j.msea.2008.09.033 ↗
8. “Metallurgical Design of High Strength Austenitic Fe-C-Mn Steels with Excellent Formability,” Contract No. RFSR-CT-2005-00030, The European Commission, Brussels, Belgium.
9. R. Ueji, N. Tsuchida, D. Terada, N. Tsuji, Y. Tanaka, A. Takemura, and K. Kunishige: Scripta Mater., 2008, vol. 59, pp. 963–66.10.1016/j.scriptamat.2008.06.050 ↗
10. ASM Handbook, vol. 8, Mechanical Testing and Evaluation, ASM INTERNATIONAL, Materials Park, OH, 2000, pp. 1586–1606.
11. M.A. Islam, S. Chen, and Y. Tomota: J. Mater. Eng. Perform., 2007, vol. 16, pp. 248–53.10.1007/s11665-007-9045-z ↗
12. D. Barbier, N. Gey, S. Allain, N. Bozzolo, and M. Humbert: Mater. Sci. Eng. A, 2009, vol. 500, pp. 196–206.10.1016/j.msea.2008.09.031 ↗
13. J. Uusitalo, L.P. Karjalainen, D. Retraint, and M. Palosaari: Mater. Sci. Forum, 2009, vols. 604–605, pp. 239–48.10.4028/www.scientific.net/MSF.604-605.239 ↗
14. Y. Sakuma, N. Kimura, A. Itami, S. Hiwatashi, O. Kawano, and K. Sakata: Nippon Steel Technical Report No. 64, Nippon Steel, Technical Development Center, Futtsu City, Chiba, Japan, 1995, pp. 20–25.
15. M.D. Chapetti, H. Miyata, T. Tagawa, T. Miyata, and M. Fujioka: Mater. Sci. Eng. A, 2004, vol. 381, pp. 331–36.10.1016/j.msea.2004.04.055 ↗
16. Information on http://www.outokumpu.com/files/Group/HR/Documents/Fatigueproperties.pdf.
17. Stainless Steel: Tables of Technical Properties, Materials and Applications Series, Euro Inox, Luxembourg, 2002, vol. 5.
18. A.S. Hamada, L.P. Karjalainen, and M.C. Somani: Mater. Sci. Eng. A, 2007, vol. 467, pp. 114–24.10.1016/j.msea.2007.02.074 ↗
19. J. Man, K. Obrtlik, and J. Polak: Mater. Sci. Eng. A, 2003, vol. 351, pp. 123–32.10.1016/S0921-5093(02)00846-8 ↗
20. J. Man, K. Obrtlik, C. Blochwitz, and J. Polak: Acta Mater., 2002, vol. 50, pp. 3767–80.10.1016/S1359-6454(02)00167-2 ↗
21. P. Villechaise, L. Sabatier, and J.C. Girard: Mater. Sci. Eng. A, 2002, vol. 323, pp. 377–85.10.1016/S0921-5093(01)01381-8 ↗
22. S. Mahajan and G.Y. Chin: Acta Metall., 1973, vol. 21, pp. 1353–63.10.1016/0001-6160(73)90085-0 ↗
23. E. El-Danaf, S.R. Kalidindi, and R. Doherty: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1223–33.10.1007/s11661-999-0272-9 ↗
24. Z.S. Basinski and S.J. Basinski: Acta Metall., 1985, vol.33, pp. 1307–17.10.1016/0001-6160(85)90241-X ↗
25. L. Llanes, A. Mateo, P. Violan, J. Méndez, and M. Anglada: Int. J. Fatigue, 1999, vol. 21, pp. 119–25.10.1016/S0142-1123(99)00063-8 ↗
26. O. Umezawa and K. Nagai: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 809–22.10.1007/s11661-998-0272-1 ↗