journal article·2018-01

Sodium Aluminate Concentration Effects on Microstructure and Corrosion Behavior of the Plasma Electrolytic Oxidation Coatings on Pure Titanium

Maryam Molaei, Arash Fattah-Alhosseini, Seyed Omid Gashti

Publisher page

Abstract

Sodium aluminate (NaAlO2) concentration was varied in order to understand the influence of the chemical composition of electrolyte on the spark characteristics, microstructure, and corrosion behavior of plasma electrolytic oxidation (PEO) coatings. For this purpose, PEO coatings were formed on the pure titanium substrate surface using solutions of four diverse sodium aluminate concentrations (6, 8, 10, and 12 g/L). The PEO process was carried out at constant time and voltage (180 seconds and 420 V). Studying the microstructures of samples by scanning electron microscope (SEM) and their corrosion behavior in 3.5 wt pct NaCl solutions indicated that the increase in NaAlO2 concentration (up to 10 g/L) led to an increase in uniformity and compactness, thus decreasing the size of micro-pores and increment of corrosion resistance. However, at a certain level of NaAlO2 concentration (12 g/L), large and severe sparks were created on the surface of the sample during the process, worsening the corrosion resistance and microstructure of coating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Magnesium Alloys: Properties and Applications · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. M. Shokouhfar, C. Dehghanian, and A. Baradaran: Appl. Surf. Sci., 2011, vol. 257, pp. 2617-24.10.1016/j.apsusc.2010.10.032 ↗
2. R.O. Hussein, X. Nie, and D.O. Northwood: Mater. Chem. Phys., 2012, vol. 134, pp. 484-92.10.1016/j.matchemphys.2012.03.020 ↗
3. S.K. Yazıcı, F. Muhaffel, and M. Baydogan: Appl. Surf. Sci., 2014, vol. 318, pp. 10-14.10.1016/j.apsusc.2013.11.137 ↗
4. J.H. Wang, J. Wang, Y. Lu, M.H. Du, and F.Zh. Han: Appl. Surf. Sci., 2015, vol. 324, pp. 405-13.10.1016/j.apsusc.2014.10.145 ↗
5. Zh. Yao, Zh. Jiang, X. Wu, X. Sun, and Zh. Wu: Surf. Coat. Technol., 2005, vol. 200, pp. 2445-50.10.1016/j.surfcoat.2004.08.188 ↗
6. M.R. Garsivaz Jazi, M.A. Golozar, K. Raeissi, and M. Fazel: Surf. Coat. Technol., 2014, vol. 244, pp. 29–36.10.1016/j.surfcoat.2014.01.042 ↗
7. M. Shokouhfar, and S.R. Allahkaram: Surf. Coat. Technol., 2016, vol. 291, pp. 396-05.10.1016/j.surfcoat.2016.03.013 ↗
8. J.L. Xu, F. Liu, F.P. Wang, and L.C. Zhao: Mater. Lett. 2008, vol. 62, pp. 4112-14.10.1016/j.matlet.2008.06.009 ↗
9. Y. Qin, D. Xiong, and J. Li: Surf. Coat. Technol., 2015, vol. 269, pp. 266-72.10.1016/j.surfcoat.2014.12.003 ↗
10. M. Sabaghi Joni, and A. Fattah-alhosseini: J. Alloys Compd., 2016, vol. 661, pp. 237-44.10.1016/j.jallcom.2015.11.169 ↗
11. L.C. Campanelli, L.T. Duarte, P.S.C.P.d. Silva, and C. Bolfarini: Mater. Des. 2014, vol. 64, pp. 393-99.10.1016/j.matdes.2014.07.074 ↗
12. S. Stojadinovic, N. Radic, R. Vasilic, M. Petkovic, P. Stefanov, and L.J. Zekovic, B. Grbic: Appl. Catal. B, 2012, vol. 126, pp. 334-41.10.1016/j.apcatb.2012.07.031 ↗
13. S. Aliasghari, A. Němcová, P. Skeldon, and G.E. Thompson: Surf. Coat. Technol., 2016, vol. 289, pp. 101-09.10.1016/j.surfcoat.2016.01.042 ↗
14. A. Fattah-alhosseini, M. Vakili-Azghandi, and M.K. Keshavarz: Acta Metall. Sin. (English Lett), 2016, vol. 29, pp. 274-81.10.1007/s40195-016-0384-3 ↗
15. M. Vakili-Azghandi, A. Fattah-alhosseini, and M.K. Keshavarz: J. Mat. Eng. Perf. 2016, vol. 25, pp. 5302-13.10.1007/s11665-016-2405-9 ↗
16. K. Dong, Y. Song, D. Shan, and E.H. Han: Corros. Sci., 2015, vol. 100, pp. 275-83.10.1016/j.corsci.2015.08.004 ↗
17. Zh. Yao, Zh. Jiang, Sh. Xin, X. Sun, and X. Wu: Electrochim. Acta, 2005, vol. 50, pp. 3273-79.10.1016/j.electacta.2004.12.001 ↗
18. Y.H. Wang, Zh.G. Liu, J.H. Ouyang, Y.M. Wang, and Y. Zhou: J. Alloys Compd., 2015, vol. 647, pp. 431-37.10.1016/j.jallcom.2015.05.154 ↗
19. K.R. Shin, Y.G. Ko, and D.H. Shin: J. Alloys Compd., 2011, vol. 509S, pp. S478-81.10.1016/j.jallcom.2011.02.056 ↗
20. S. Hariprasad, M. Ashfaq, T. Arunnellaiappan, H. Manu, and N. Rameshbabu: Surf. Coat. Technol., 2016, vol. 292, pp. 20-29.10.1016/j.surfcoat.2016.03.016 ↗
21. X.L. Zhang, Zh.H. Jiang, Zh.P. Yao, and Zh.D. Wu: Corros. Sci., 2010, vol. 52, pp. 3465-73.10.1016/j.corsci.2010.06.017 ↗
22. H. Wang, F. Liu, X. Xiong, Sh. Ke, X. Zeng, and P. Lin: Appl. Surf. Sci., 2015, vol. 356, pp. 1234-43.10.1016/j.apsusc.2015.08.228 ↗
23. S. Sarbishei, M.A. Faghihi Sani, and M.R. Mohammadi: Ceram. Int., 2016, vol. 42, pp. 8789-97.10.1016/j.ceramint.2016.02.120 ↗
24. F. Liu, J.L. Xu, D.Z. Yu, F.P. Wang, and L.C. Zhao: Mater. Chem. Phys., 2010, vol. 121, pp. 172-77.10.1016/j.matchemphys.2010.01.002 ↗
25. M. Tang, W. Li, H. Liu, and L. Zhu: Curr. Appl. Phys., 2012, vol. 12, pp. 1259-65.10.1016/j.cap.2012.03.003 ↗
26. A. Fattah-alhosseini, and M. Sabaghi Joni: J. Mater. Eng. Perform. 2015, vol. 24, pp. 3444-52.10.1007/s11665-015-1645-4 ↗
27. M. Khorasanian, A. Dehghan, M.H. Shariat, M.E. Bahrololoom, and S. Javadpour: Surf. Coat. Technol., 2011, vol. 206, pp. 1495-02.10.1016/j.surfcoat.2011.09.038 ↗
28. Zh. Yao, P. Su, Q. Shen, P. Ju, Ch. Wu, Y. Zhai, and Zh. Jiang: Surf. Coat. Technol., 2015, vol. 269, pp. 273-78.10.1016/j.surfcoat.2015.01.032 ↗
29. O.A. Galvis, D. Quintero, J.G. Castaño, H. Liu, G.E. Thompson, P. Skeldon, and F. Echeverría: Surf. Coat. Technol., 2015, vol. 269, pp. 238-49.10.1016/j.surfcoat.2015.02.036 ↗
30. M. Shokouhfar, C. Dehghanian, M. Montazeri, and A. Baradaran: Appl. Surf. Sci., 2012, vol. 258, pp. 2416-23.10.1016/j.apsusc.2011.10.064 ↗
31. K. Venkateswarlu, N. Rameshbabu, D. Sreekanth, M. Sandhyarani, A.C. Bose, V.Muthupandi, and S. Subramanian: Electrochim. Acta, 2013, vol. 105, pp. 468-80.10.1016/j.electacta.2013.05.032 ↗
32. Y. Vangolu, E. Arslan, Y. Totik, E. Demirci, and A. Alsaran: Surf. Coat. Technol., 2010, vol. 205, pp. 1764-73.10.1016/j.surfcoat.2010.08.042 ↗
33. V. Sáenz de Viteri, R. Bayón, A. Igartua, G. Barandika, J. Esteban Moreno, C. Pérez-Jorge Peremarch, and M. Martínez Pérez: Appl. Surf. Sci., 2016, vol. 367, pp. 1–10.10.1016/j.apsusc.2016.01.145 ↗
34. W. Zhu, Y.J. Fang, H. Zheng, G. Tan, H. Cheng, and Ch. Ning: Thin Solid Films, 2013, vol. 544, pp. 79-82.10.1016/j.tsf.2013.04.121 ↗
35. M. Aliofkhazraei, R. Shoja Gharabagh, M. Teimouri, M. Ahmadzadeh, Gh. Barati Darband, and H. Hasannejad: J. Alloys Compd., 2016, vol. 685, pp. 376-83.10.1016/j.jallcom.2016.05.315 ↗
36. M. Babaei, Ch. Dehghanian, and M. Vanaki: Appl. Surf. Sci., 2015, vol. 357, pp. 712-20.10.1016/j.apsusc.2015.09.059 ↗