Stress and Composition of Carbon Stabilized Expanded Austenite on Stainless Steel
Source abstract
Abstract
Low-temperature gaseous carburizing of stainless steel is associated with a colossal supersaturation of the fcc lattice with carbon, without the development of carbides. This article addresses the simultaneous determination of stress and composition profiles in layers of carbon expanded austenite obtained by low-temperature gaseous carburizing of AISI 316. X-ray diffraction was applied for the determination of lattice spacing depth profiles by destructive depth profiling and reconstruction of the original lattice spacing profiles from the measured, diffracted intensity weighted, values. The compressive stress depth distributions correlate with the depth distribution of the strain-free lattice parameter, the latter being a measure for the depth distribution of carbon in expanded austenite. Elastically accommodated compressive stress values as high as −2.7 GPa were obtained, which exceeds the uniaxial tensile yield strength by an order of magnitude.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Z.L. Zhang, T. Bell: Surf. Eng., 1985, vol. 1, pp. 131–3610.1179/sur.1985.1.2.131 ↗
2. Y. Sun, X. Li, T. Bell: Mater. Sci. Technol., 1999, vol. 15, pp. 1171–7810.1179/026708399101505077 ↗
3. D.L. Williamson, O. Ozturk: Surf. Coat. Technol., 1994, vol. 65, pp. 15–2310.1016/S0257-8972(94)80003-0 ↗
4. Y. Sun, T. Bell, Z. Kolosvary, J. Flis: Heat Treat. Met., 1999, vol. 26, pp. 9–16
5. T. Bell and K. Akamatsu: Stainless Steel 2000—Thermochemical Surface Engineering of Stainless Steel, Maney Publishing, London, 2001
6. P.C. Williams and S.C. Marx: U.S. Patent 6,093,303, July 25, 2000
7. M.A.J. Somers, T. Christiansen, and P. Møller: Danish Patents DK174707 B1 and PCT/DK03/00497
8. T. Christiansen, M.A.J. Somers: Surf. Eng., 2005, vol. 21, pp. 445–5510.1179/174329405X68597 ↗
9. P.C. Williams and S.C. Marx: U.S. Patent 6,547,888, April 15, 2003
10. Y. Cao, F. Ernst, G.M. Michal: Acta Mater., 2003, vol. 51, pp. 4171–8110.1016/S1359-6454(03)00235-0 ↗
11. G.M. Michal, F. Ernst, H. Kahn, Y. Cao, F. Oba, N. Agarwal, A.H. Heuer: Acta Mater., 2006, vol. 54, pp. 1597–160610.1016/j.actamat.2005.11.029 ↗
12. M.A.J. Somers and T. Christiansen: Patent application PCT WO 2006136166_A1, 2006
13. K. Ichii, K. Fujimura, T. Takase: Technol. Rep. Kansai Univ., 1986, vol. 27, pp. 135–44
14. S. Thaiwatthana, X.Y. Li, H. Dong, T. Bell: Surf. Eng., 2002, vol. 18, pp. 433–3710.1179/026708402225002730 ↗
15. T. Christiansen, M.A.J. Somers: Scripta Mater., 2004, vol. 50, pp. 35–3710.1016/j.scriptamat.2003.09.042 ↗
16. J.C. Jiang, E.I. Meletis: J. Appl. Phys., 2000, vol. 88, pp. 4026–3110.1063/1.1289476 ↗
17. C. Blawert, H. Kalvelage, B.L. Mordike, G.A. Collins, K.T. Short, Y. Jirásková, O. Schneeweiss: Surf. Coat Technol., 2001, vol. 136, pp. 181–8710.1016/S0257-8972(00)01050-1 ↗
18. T. Christiansen, M.A.J. Somers: Metall. Mater. Trans A, 2006, vol. 37A, pp. 675–8210.1007/s11661-006-0039-5 ↗
19. X.Y. Li, Y. Sun, T. Bell: Z. Metallkd., 1999, vol. 90, pp. 901–07
20. Y. Jirásková, C. Blawert, O. Scheeweiss: Phys. Status Solidi (a), 1999, vol. 175, pp. 537–4810.1002/(SICI)1521-396X(199910)175:2<537::AID-PSSA537>3.0.CO;2-B ↗
21. T. Christiansen, M.A.J. Somers: Z. Metallkd., 2006, vol. 97, pp. 79–88
22. F. Ernst, Y. Cao, G.M. Michal, A.H. Heuer: Acta Mater., 2007, vol. 55, pp. 1895–190610.1016/j.actamat.2006.09.049 ↗
23. S. Sienz, S. Mandl, B. Rauschenbach: Surf. Coat. Technol., 2002, vol. 156, pp. 185–8910.1016/S0257-8972(02)00081-6 ↗
24. T. Christiansen, M.A.J. Somers: Mater. Sci. Forum, 2004, vols. 443–444, pp. 91–9410.4028/www.scientific.net/MSF.443-444.91 ↗
25. T. Christiansen, M.A.J. Somers: Mater. Sci. Eng. A, 2006, vol. 421, pp. 181–8910.1016/j.msea.2006.03.007 ↗
26. S. Yong and C.L. Ying: 4th Eur. Stainless Steel Science and Market Congr., ed. Editions de La Revue de Metállurgie, Nanterre, France, 2002, pp. 285–90
27. M.J. Marques, J. Pina, A.M. Dias, J.L. Lebrun, J. Feugeas: Surf Coat. Technol., 2005, vol. 195, pp. 8–1610.1016/j.surfcoat.2004.06.005 ↗
28. V. Hauk: Structural and Residual Stress Analysis by Nondestructive Methods, Elsevier, Amsterdam, 1997
29. W.G. Sloof, M.A.J. Somers, R. Delhez, T.H. de Keijser, and E.J. Mittemeijer: in Residual Stresses in Science and Technology, E. Macherauch and V. Hauk, eds., Deutsche Gesellschaft für Metallkunde, Oberursel, 1987, vol. 1, pp. 493–500
30. R. Delhez, T.H. de Keijser, E.J. Mittemeijer: Surf. Eng., 1987, vol. 3, pp. 331–4210.1179/sur.1987.3.4.331 ↗
31. M.A.J. Somers, E.J. Mittemeijer: Metall. Trans. A, 1990, vol. 21A, pp. 189–20410.1007/BF02656436 ↗
32. M.G. Moore, W.P. Evans: SAE Trans., 1958, vol. 66, pp. 340–45
33. F. Bollenrath, V. Hauk, E.H. Müller: Z. Metallkd., 1967, vol. 58, pp. 76–82
34. K. Salmutter, F. Stangler: Z. Metallkd., 1960, vol. 51, pp. 544–48
35. V. Hauk, H. Kockelmann: Arch. Eisenhüttenwes., 1976, vol. 31, pp. 38–41
36. K.J. Irvine, D.T. Llewellyn, F.B. Pickering: J. Iron Steel Inst., 1961, vol. 199, pp. 153–75
37. A.H. Heuer, F. Ernst, H. Kahn, A. Avishai, G.M. Michal, D.J. Pitchure, R.E. Ricker: Scripta Mater., 2007, vol. 56, pp. 1067–7010.1016/j.scriptamat.2007.02.035 ↗
38. H. Du, M.A.J. Somers, J. Ågren: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 195–21110.1007/s11661-000-0065-7 ↗
39. M.L.G. Byrnes, M. Grujicic, W.S. Owen: Acta Metall., 1987, vol. 35, pp. 1853–6210.1016/0001-6160(87)90131-3 ↗