Effects of the entrained surface film on the reliability of castings
Source abstract
Abstract
The tilt pouring and gravity top pouring of an Al-4.5 pct Cu alloy have been studied. A computercontrolled rollover casting wheel was used to perform the tilt pouring. Filling sequences with tranquil or turbulent flow patterns have been visualized using real-time X-ray video radiography and modeled using a computational fluid dynamics (CFD) code. The area of the free surface film entrained into the bulk of liquid metal in different filling conditions has been calculated using a filling sequence free from surface turbulence as a baseline. The tensile properties of the castings have been quantitatively assessed for reliability using a two-parameter Weibull distribution function. The study reveals that the liquid metal flow in the mold filling process can be accurately simulated using a CFD code. In addition, the computed total surface area of the entrained surface film can be used as a criterion to judge the deterioration of reliability. The high Weibull modulus achieved by filling a mold without surface turbulence was reduced by a factor of 2.5 of its original value by entrained surface films. Entrainment of bubbles required surface turbulence, but folded films could be entrained simply by contraction of the free surface, creating excess surface film that necessarily folds inward.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fluid Dynamics and Heat Transfer · Fluid Dynamics and Thin Films · Fluid Dynamics Simulations and Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. J. Campbell: Castings, 2nd ed., Butterworth-Heinemann, Oxford, United Kingdom, 2003, pp. 17–69 and 310–05.10.1016/B978-075064790-8/50019-X ↗
2. S.B. Kim and C.P. Hong: in Modeling of Casting, Welding and Advanced Solidification Processes VII, M. Cross and J. Campbell, eds., TMS, London, 1995, pp. 556–63.
3. Z.A. Xu and F. Mampaey: AFS Trans., 1996, vol. 104, pp. 155–66.
4. A. Habibollahzadeh: Ph.D. Thesis, The University of Birmingham, Birmingham, United Kingdom, 2001.
5. J. Mi: Ph.D. Thesis, The University of Birmingham, Birmingham, United Kingdom, 2002.
6. W. Weibull: J. Appl. Mech., 1951, vol. 18, pp. 293–97.10.1115/1.4010337 ↗
7. A. Khalili and K. Kromp: J. Mater. Sci., 1991, vol. 26, pp. 6741–52.10.1007/BF02402669 ↗
8. N.R. Green and J. Campbell: Mater. Sci. Eng., 1993, vol. A173, pp. 261–66.10.1016/0921-5093(93)90226-5 ↗
9. N.R. Green and J. Campbell: AFS Trans., 1994, vol. 102, pp. 341–47.
10. C. Nyahumwa, N.R. Green, and J. Campbell: AFS Trans., 1997, vol. 105, pp. 215–23.
11. M.R. Barkhudarov and C.W. Hirt: in Modeling of Casting, Welding and Advanced Solidification Processes VII, M. Cross and J. Campbell, eds., TMS, London, 1995, pp. 935–46.
12. X. Yang and J. Campbell: Int. J. Cast Met. Res., 1998, vol. 10, pp. 239–53.10.1080/13640461.1998.11819240 ↗
13. J.C. Gebelin and M. Jolly: in Modeling of Casting, Welding and Advanced Solidification Processes X, D. Stefanescu, J. Warren, M. Jolly, and M. Krane, eds., Destin, FL, 2003, TMS, Warrendale, PA, pp. 431–38.
14. N.W. Lai, W.D. Griffiths, and J. Campbell: in Modeling of Casting, Welding and Advanced Solidification Processes X, D. Stefanescu, J. Warren, M. Jolly, and M. Krane, eds., Destin, FL, 2003, TMS, Warrendale, PA, pp. 415–22.
15. Flow-3D Manual, Flow Science Inc., Santa Fe, NM, 1999.
16. W. Shyy, H.S. Udaykumar, M.M. Rao, and R.W. Smith: Computational Fluid Dynamics with Moving Boundaries, Taylor & Francis Ltd., London, 1996, pp. 67–95.
17. C.W. Hirt and B.D. Nicolas: J. Comp. Phys., 1981, vol. 39, pp. 201–25.10.1016/0021-9991(81)90145-5 ↗
18. M. Barkhudarov and K. Williams: AFS Trans., 1995, vol. 103, pp. 669–74.
19. J. Lin, M.A.R. Sharif, and J.L. Hill: in Fluid Flow Phenomena in Metal Processing, N. El-Kaddah, D.G.C. Robertson, S.T. Johansen, and V.R. Voller, eds., TMS, San Diego, CA, 1999, pp. 501–08.
20. M.B. Abbott and D.R. Basco: Computational Fluid Dynamics—An Introduction for Engineers, Longman Scientific & Technical, Harlow, 1989, pp. 212–35.
21. W.D. Griffiths and M. Cox: IRC in Materials Processing, The University of Birmingham, UK unpublished research, 2001.