journal article·2012-12

Textural Evolution During Dynamic Recovery and Static Recrystallization of Molybdenum

Sophie Primig, Harald Leitner, Wolfram Knabl, Alexander Lorich, Helmut Clemens, Roland Stickler

Publisher page

Abstract

In the current investigation, sintered molybdenum specimens with random textures were deformed in compression in a deformation dilatometer over a range of temperatures from 0.44T M [K] to 0.61T M [K] and true strains between φ = 0.3 and 0.92. Subsequent annealing treatments were carried out in the dilatometer in order to study static recrystallization phenomena. Electron backscatter diffraction scans of deformed and recrystallized specimens revealed that the microstructure after hot deformation is a recovered structure with two remarkably strong orientation components, 〈111〉 parallel to the loading direction exhibiting a high Taylor factor and 〈100〉 parallel to the loading direction with a low one. The fraction of the first component increases with lowering the deformation temperature, while static recrystallization leads to a higher fraction of the second component. The late-stage recrystallization behavior is sluggish due to a high amount of recovery. The results are discussed employing models for textural evolution in body-centered cubic (bcc) metals on the one hand and recrystallization of high-stacking-fault energy materials on the other.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Powder Metallurgy Techniques and Materials · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. W. Martienssen and H. Warlimont: Springer Handbook of Condensed Matter and Materials Data, 1st ed., Springer, Berlin, Germany, 2005.10.1007/3-540-30437-1 ↗
2. V. Guttmann: J. Less Common. Met., 1970, vol. 21, pp. 51–61.10.1016/0022-5088(70)90164-5 ↗
3. G.V. Estulin and Y.I. Demkin: Sci. Heat. Treat., 1962, vol. 4, pp. 273–75.10.1007/BF00814411 ↗
4. E. Pink: Planseeberichte für Pulvermetallurgie, 1965, vol. 13, pp. 100–04.
5. S. Primig, H. Leitner, H. Clemens, A. Lorich, W. Knabl, and R. Stickler: Int. J. Refract. Met. Hard Mater., 2010, vol. 28, pp. 703–08.10.1016/j.ijrmhm.2010.03.006 ↗
6. T. Mrotzek, A. Hoffmann, and U. Martin: Int. J. Refract. Met. Hard Mater., 2006, vol. 24, pp. 298–305.10.1016/j.ijrmhm.2005.10.003 ↗
7. J.S. Hirschhorn: J. Less Common Met., 1963, vol. 5, pp. 493–509.10.1016/0022-5088(63)90062-6 ↗
8. F.J. Humphreys: J. Mater. Sci., 2001, vol. 36, pp. 3833–54.10.1023/A:1017973432592 ↗
9. M. Semchyshen and G.A. Timmons: Trans. AIME, 1952, vol. 194, pp. 279–86.
10. P.I. Welch and G.J. Davies: Texture Microstruct., 1983, vol. 6, pp. 21–38.10.1155/TSM.6.21 ↗
11. D. Raabe and K. Lücke: Z. Metallkd., 1994, vol. 85, pp. 302–06.
12. I. Hünsche, C.-G. Oertel, R. Tamm, and W. Skrotzki: Mater. Sci. Forum, 2004, vols. 467–470, pp. 495–500.10.4028/www.scientific.net/MSF.467-470.495 ↗
13. C.-G. Oertel, I. Huensche, W. Skrotzki, W. Knabl, A. Lorich, and J. Resch: Mater. Sci. Eng. A, 2008, vols. 483–484, pp. 79–83.10.1016/j.msea.2007.03.107 ↗
14. C.-G. Oertel, I. Hünsche, W. Skrotzki, A. Lorich, W. Knabl, J. Resch, and T. Trenkwalder: Int. J. Refract. Met. Hard Mater., 2010, vol. 28, 722–27.10.1016/j.ijrmhm.2010.07.003 ↗
15. R.K. Ray, J.J. Jonas, and R.E. Hook: Int. Mater. Rev., 1994, vol. 39, pp. 129–72.10.1179/095066094790326112 ↗
16. D. Raabe and K. Lücke: Mater. Sci. Forum, 1994, vols. 157–162, pp. 597–610.10.4028/www.scientific.net/MSF.157-162.597 ↗
17. D. Raabe, G. Schlenkert, H. Weisshaupt, and K. Lücke: Mater. Sci. Technol., 1994, vol. 10, pp. 299–305.10.1179/026708394790163942 ↗
18. M. Hölscher, D. Raabe, and K. Lücke: Steel Res. Int., 1991, vol. 62, pp. 567–75.10.1002/srin.199100451 ↗
19. D. Raabe: Steel Res. Int., 1995, vol. 66, pp. 222–29.10.1002/srin.199501116 ↗
20. Y.B. Park, D.N. Lee. and G. Gottstein: Acta Mater., 1998, vol. 46, pp. 3371–79.10.1016/S1359-6454(98)00052-4 ↗
21. Y.B. Park, D.N. Lee. and G. Gottstein: Mater. Sci. Eng. A, 1998, vol. 257, pp. 178–84.10.1016/S0921-5093(98)00837-5 ↗
22. D.N. Lee: Scripta Metall. Mater., 1995, vol. 32, pp. 1689–94.10.1016/0956-716X(95)00256-U ↗
23. W. Reiter and F. Benesovsky: Planseeberichte für Pulvermetallurgie, 1972, vol. 20, pp. 203–18.
24. T. Senuma, H. Yada, R. Shimizu, and J. Harase: Acta Metall. Mater., 1990, vol. 38, pp. 2673–81.10.1016/0956-7151(90)90281-K ↗
25. M.R. Barnett and J.J. Jonas: ISIJ Int., 1997, vol. 37, pp. 697–705.10.2355/isijinternational.37.697 ↗
26. M.R. Barnett and J.J. Jonas: ISIJ Int., 1997, vol. 37, pp. 706–14.10.2355/isijinternational.37.706 ↗
27. M.R. Barnett: ISIJ Int., 1998, vol. 38, pp. 78–85.10.2355/isijinternational.38.78 ↗
28. S. Primig, H. Leitner, A. Lorich, W. Knabl, H. Clemens, and R. Stickler: Pract. Metall., 2011, vol. 48, pp. 344–55.10.3139/147.110136 ↗
29. B.A. Simkin and M.A. Crimp: Ultramicroscopy, 1999, vol. 77, pp. 65–75.10.1016/S0304-3991(99)00009-1 ↗
30. S.-H. Choi and Y.-S. Jin: Mater. Sci. Eng. A, 2004, vol. 371, pp. 149–59.10.1016/j.msea.2003.11.034 ↗
31. D.A. Hughes, N. Hansen, and D.J. Bamann: Scripta Mater., 2003, vol. 48, pp. 147–53.10.1016/S1359-6462(02)00358-5 ↗
32. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D.J. Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng. A, 1997, vol. 238, pp. 219–74.10.1016/S0921-5093(97)00424-3 ↗
33. H.J. McQueen: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 345–62.10.1007/s11661-002-0096-3 ↗
34. H.J. McQueen and W. Blum: Mater. Sci. Eng. A, 2000, vol. 290, pp. 95–107.10.1016/S0921-5093(00)00933-3 ↗
35. R.D. Doherty, G. Gottstein, J. Hirsch, W.B. Hutchinson, K. Lucke, E. Nes, and P.J. Wilbrandt: Proc. ICOTOM8, J.S. Kallend and G. Gottstein, eds., TMS, Warrendale, PA, 1988, pp. 563–72.
36. S.J. Hales, T.R. McNelley, and H.J. McQueen: Metall. Trans. A, 1991, vol. 22A, pp. 1037–47.10.1007/BF02661097 ↗
37. J. Neges, B. Ortner, G. Leichtfried, and H.P. Stüwe: Mater. Sci. Eng. A, 1995, vol. 196, pp. 129–33.10.1016/0921-5093(94)09706-2 ↗
38. S. Gourdet and F. Montheillet: Mater. Sci. Eng. A, 1999, vol. 283, pp. 274–88.10.1016/S0921-5093(00)00733-4 ↗
39. S. Gourdet and F. Montheillet: Acta Mater., 2002, vol. 50, pp. 2801–12.10.1016/S1359-6454(02)00098-8 ↗
40. S. Gourdet and F. Montheillet: Acta Mater., 2003, vol. 51, pp. 2685–99.10.1016/S1359-6454(03)00078-8 ↗
41. H.J. McQueen and M.E. Kassner: Scripta Mater., 2004, vol. 51, pp. 461–65.10.1016/j.scriptamat.2004.05.027 ↗
42. H.J. McQueen and S. Spigarelli: Mater. Sci. Eng. A, 2007, vol. 462, pp. 37–44.10.1016/j.msea.2006.04.151 ↗
43. J.K. Solberg, H.J. McQueen, N. Ryum, and E. Nes: Phil. Mag. A, 1989, vol. 60, pp. 447–71.10.1080/01418618908213872 ↗
44. H.J. McQueen, J.K. Solberg, N. Ryum, and E. Nes: Phil. Mag. A, 1989, vol. 60, pp. 473–85.10.1080/01418618908213873 ↗
45. R. Srinivasan, G.B. Viswanathan, V.I. Levit, and H.L. Fraser: Mater. Sci. Eng. A, 2009, vol. 507, pp. 179–89.10.1016/j.msea.2008.12.013 ↗
46. R. Palme: Planseeberichte für Pulvermetallurgie, 1968, vol. 16, pp. 159–68.
47. I.L. Dillamore and H. Katoh: Met. Sci., 1974, vol. 8, pp. 73–83.10.1179/msc.1974.8.1.73 ↗
48. C. Palme: Ph. D. Dissertation, Leopold-Franzens-Universität Innsbruck, Innsbruck, Austria, 1970.
49. P.A. Beck and P.R. Sperry: J. Appl. Phys., 1949, vol. 21, pp. 150–52.10.1063/1.1699614 ↗
50. R.D. Doherty: Met. Sci., 1974, vol. 8, pp. 132–42.10.1179/msc.1974.8.1.132 ↗
51. B. Hutchinson: Scripta Metall. Mater., 1992, vol. 27, pp. 1471–75.10.1016/0956-716X(92)90130-7 ↗
52. R.W. Cahn: Proc. Phys. Soc., 1950, vol. 63, pp. 323–36.10.1088/0370-1298/63/4/302 ↗
53. C. Crussard, F. Aubertin, B. Jaoul, and G. Wyon: Progr. Metall. Phys., 1950, vol. 2C, pp. 193–202.10.1016/0502-8205(50)90010-4 ↗
54. I. Samajdar, B. Verlinden, P. Van Houtte, and D. Vanderschueren: Scripta Mater., 1997, vol. 37, pp. 869–74.10.1016/S1359-6462(97)00185-1 ↗
55. M. Oyarzabal, A. Martinez-de-Guerenu, and I. Gutierrez: Mater. Sci. Eng. A, 2008, vol. 485, pp. 200–09.10.1016/j.msea.2007.07.077 ↗