Failure mechanisms in superplastic AA5083 materials
Source abstract
Abstract
The mechanisms of tensile failure in four 5083 aluminum sheet materials are evaluated under conditions of interest for superplastic and quick-plastic forming. Two mechanisms are shown to control failure of the AA5083 materials under uniaxial tension at elevated temperatures: cavitation and flow localization (i.e., necking). Conditions for which failure is controlled by cavitation correspond to those under which deformation is primarily by grain-boundary-sliding creep. Conditions for which failure is controlled by flow localization correspond to those under which deformation is primarily by solutedrag creep. A geometric parameter, Q, is used to determine whether final failure is controlled by cavitation or by flow localization. Differences in elongations to failure between the different AA5083 materials at high temperatures and slow strain rates are the result of differences in cavitation behaviors. The rate of cavitation growth with strain is nearly constant between the AA5083 materials for identical testing conditions, but materials with less tensile ductility evidence initial cavitation development at lower strain levels. The rate of cavitation growth with strain is shown to depend on the governing deformation mechanism; grain-boundary-sliding creep produces a faster cavitation growth rate than does solute-drag creep. A correlation is found between the early development of cavitation and the intermetallic particle-size population densities of the AA5083 materials. Fine filaments, oriented along the tensile axis, are observed on fracture surfaces and within surface cavities of specimens deformed primarily under grain-boundary-sliding creep. As deformation transitions to control by solute-drag creep, the density of these filaments dramatically decreases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. K. Osada and K. Shirkawa: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 41–49.
2. http://www.superform-aluminium.com/.
3. J.G. Schroth: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 9–20.
4. A. Ball and M.M. Hutchison: Met. Sci. J., 1969, vol. 3, pp. 1–7.10.1016/0036-9748(69)90167-7 ↗
5. O.D. Sherby and J. Wadsworth: in Superplasticity in Aerospace, H.C. Heikkenen and T.R. McNelley, eds., TMS, Warrendale, PA, 1988, pp. 3–27.
6. H. Fukuyo, H.C. Tsai, T. Oyama, and O.D. Sherby: Iron Steel Inst. Jpn. Int., 1991, vol. 31, pp. 76–85.10.2355/isijinternational.31.76 ↗
7. T.G. Langdon: Mater. Sci. Eng., 1991, vol. A137, pp. 1–11.10.1016/0921-5093(91)90312-B ↗
8. J.S. Vetrano, C.A. Lavender, C.H. Hamilton, M.T. Smith, and S.M. Bruemmer: Scripta Metall., 1994, vol. 30, pp. 565–70.10.1016/0956-716X(94)90430-8 ↗
9. R. Verma, P. Friedman, A. Ghosh, C. Kim, and S. Kim: J. Mater. Eng. Performance, 1995, vol. 4, pp. 543–50.10.1007/BF02649585 ↗
10. R. Verma, P. Friedman, A. Ghosh, S. Kim, and C. Kim: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1889–98.10.1007/BF02651938 ↗
11. T.G. Nieh, J. Wadsworth, and O.D. Sherby: Superplasticity in Metals and Ceramics, Cambridge University Press, Cambridge, United Kingdom, 1997, pp. 40–53.10.1017/CBO9780511525230 ↗
12. Y. Takayama, S. Sasaki, T. Tozawa, H. Kato, H. Watanabe, and M. Kokubo: J. Jpn. Inst. Light Met., 1999, vol. 49, pp. 378–82.10.2464/jilm.49.378 ↗
13. D.H. Bae and A.K. Ghosh: Acta Mater., 2000, vol. 48, pp. 1207–24.10.1016/S1359-6454(99)00445-0 ↗
14. I.C. Hsiao and J.C. Huang: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1373–84.10.1007/s11661-002-0062-0 ↗
15. R.M. Cleveland, A.K. Ghosh, and J.R. Bradley: Metall. Mater. Trans. A, 2003, vol. 351, pp. 228–36.
16. P.A. Friedman and W.B. Copple: in Hot Deformation of Aluminum Alloys III, Z. Jin, A. Beaudoin, T.A. Bieler, and B. Radhakrishnan, eds., TMS, Warrendale, PA, 2003, pp. 211–19.
17. M.-A. Kulas, P.E. Krajewski, T.R. McNelley, and E.M. Taleff: in Hot Deformation of Aluminum Alloys III, Z. Jin, A. Beaudoin, T. Bieler, and B. Radhakrishnan, eds., TMS, Warrendale, PA, 2003, pp. 499–507.
18. M.-A. Kulas, W.P. Green, E.C. Pettengill, P.E. Krajewski, and E.M. Taleff: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 127–38.
19. M.-A. Kulas, W.P. Green, E.M. Taleff, P.E. Krajewski, and T.R. McNelley: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1249–61.10.1007/s11661-005-0217-x ↗
20. E.M. Taleff, P.J. Nevland, and P.E. Krajewski: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1119–30.10.1007/s11661-001-0123-9 ↗
21. E.M. Taleff: Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 85–94.
22. D.H. Bae and A.K. Ghosh: Acta Mater., 2002, vol. 50, pp. 511–23.10.1016/S1359-6454(01)00375-5 ↗
23. D.H. Bae and A.K. Ghosh: Acta Mater., 2002, vol. 50, pp. 993–1009.10.1016/S1359-6454(01)00399-8 ↗
24. D.H. Bae and A.K. Ghosh: Acta Mater., 2002, vol. 50, pp. 1011–29.10.1016/S1359-6454(01)00400-1 ↗
25. D.H. Bae, A.K. Ghosh, and J.R. Bradley: Metall. Mater. Trans. A, 2003, vol. 34, pp. 2449–63.10.1007/s11661-003-0005-4 ↗
26. J.R. Bradley: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 109–18.
27. J.R. Bradley and J.E. Carsley: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 149–57.
28. M.A. Khaleel, H.M. Zbib, and E.A. Nyberg: Int. J. Plast., 2001, vol. 17, pp. 277–96.10.1016/S0749-6419(00)00036-X ↗
29. D.H. Bae and A.K. Ghosh: Mater. Sci. Eng. A, 2002, vol. A322, pp. 233–40.10.1016/S0921-5093(01)01134-0 ↗
30. K. Oh-ishi, J.F. Boydon, and T.R. McNelley: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 119–26.
31. E.M. Taleff, D.R. Lesuer, and J. Wadsworth: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 343–52.10.1007/BF02648411 ↗
32. E.M. Taleff, W.-J. Kim, and O.D. Sherby: in Modeling the Mechanical Response of Structural Materials, E.M. Taleff and R.K. Mahidhara, TMS, Warrendale, PA, 1998, pp. 209–18.
33. E.M. Taleff and P.J. Nevland: JOM, 1999, vol. 51, pp. 34–36.10.1007/s11837-999-0009-7 ↗
34. E.M. Taleff, T. Leon-Salamanca, R.A. Ketcham, R. Reyes, and W.D. Carlson: J. Mater. Res., 2000, vol. 15, pp. 76–84.10.1557/JMR.2000.0015 ↗
35. N.R. Harrison, S.G. Luckey, P.A. Friedman, and Z.C. Xia: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 301–09.
36. K. Murali, G.P. Montgomery, Jr., and J.G. Schroth: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, TMS, Warrendale, PA, 2004, pp. 311–21.
37. M.A. Burke and W.D. Nix: Acta Metall., 1975, vol. 23, pp. 793–98.10.1016/0001-6160(75)90195-9 ↗
38. J.W. Hutchinson and H. Obrecht: Fracture, 1977, vol. 1, pp. 101–16.
39. S. Kim, M.P. Balogh, and R.A. Waldo: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, and J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 139–48.
40. J.J. Blandin, B. Hong, A. Varloteaux, M. Suery, and G. L’Esperance: Acta Mater., 1996, vol. 44, pp. 2317–26.10.1016/1359-6454(95)00340-1 ↗
41. W.D. Cao, X.P. Lu, and H. Conrad: Acta Mater., 1996, vol. 44, pp. 697–706.10.1016/1359-6454(95)00176-X ↗
42. M.G. Zelin: Acta Mater., 1997, vol. 45, pp. 3533–42.10.1016/S1359-6454(97)00065-7 ↗