journal article·2006-11

Microstructural effects on the springback of advanced high-strength steel

Wei Gan, S. S. Babu, Nick Kapustka, Robert H. Wagoner

Publisher page

Abstract

The application of advanced high-strength steels (AHSS) has been growing rapidly in the automotive industry. Because of their high-strength, thinner sheet metals can be used for body components to achieve both weight savings and increased safety. However, this will lead to greater springback deviation from design after the forming operation. Fundamental understanding and prediction of springback are required for springback compensation and tooling design. While various types of continuum mechanics based models have been proposed to simulate the mechanical behavior of advanced high-strength steels, few of them consider microstructural effects such as material heterogeneity. In this study, through sheet thickness strength variation has been observed in DP 780 and TRIP 780 steels. Finite-element simulation indicates that the through thickness effect (TTE) can have a significant impact on the springback behavior of these sheet metals. This is verified through our experimental work using draw-bend testing. The results suggest that microstructural effects should be considered to accurately simulate springback of AHSS. Based on these results, implications of different microstructural designs will be discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. J. Chainer:AISE Steel Technol., 2002, vol. 79 (7–8), pp. 69–73.
2. J.R. Shaw and B.K. Zuidema:J. Mater. Manuf., 2001, vol. 5 (110), pp. 976–83.
3. T. Senuma:Can. Metall. Q., 2004, vol. 43 (1), pp. 1–12.10.1179/cmq.2004.43.1.1 ↗
4. R. Bode, M. Meurer, T.W. Schaumann, and W.W. Arnecke:Galvatech’04 Conf. Proc., reprinted by Association for Iron & Steel Technology, 2004, Warrendale, PA.
5. T. Senuma:Iron Steel Inst. Jpn. Int., 2001, vol. 41 (6), pp. 520–32.10.2355/isijinternational.41.520 ↗
6. S. Keeler:Met. Forming, Apr. 2005, pp. 52–53.10.1007/BF03251905 ↗
7. S.M. Song, K. Sugimoto, M. Kobayashi, H. Matsubara, and T. Kashima:Tetsu-to-Hagane, 2000, vol. 86 (8), pp. 563–69.10.2355/tetsutohagane1955.86.8_563 ↗
8. M. Takahashi:Nippon Steel Techn. Rep., 2003, vol. 88, pp. 2–7.
9. International Iron and Steel Institute: Advanced High Strength Steel (AHSS) Application Guidelines, Mar. 2005, www.worldautosteel.org
10. E. Pereloma:Mater. Austr., 2003, Nov.–Dec., pp. 6–9.
11. L. Svensson and J.K. Larsson:6th Int. Trends in Welding Research Conf. Proc., 2002, pp. 787–92.
12. E. Biro and A. Lee:Sheet Metal Welding Conf. XI, 2004, Sterling Heights, MI.
13. C. Hsu, P. Soltis, D. Barton, and C. Occhialini:Sheet Metal Welding Conf. XI, Sterling Heights, MI, 2004.
14. C. Conrady and N. Kapustka:Sheet Metal Welding Conf. XII, Livonia, MI, May 9–12, 2006.
15. S. Papaefthymiou, W. Bleck, U. Prahl, C. Acht, J. Sietsma, and S. van der Zwaag:Mater. Sci. Forum, 2003, vol. 426 (4), pp. 1355–60.10.4028/www.scientific.net/MSF.426-432.1355 ↗
16. B. Högmanet al.:Verschleißschutztechnik, Schopfheim, Germany, 2004.
17. G. Hartmann:Processing State of the Art Multiphase Steels, ACI Conf. Berlin, 2004.
18. B. Carlsson:3rd Int. Conf. Exhib. on Design and Production of Dies and Molds and 7th Int. Symp. on Advances in Abrasive Technology, Bursa, Turkey, June 17–19, 2004.
19. Y. Kuriyama: No. 175-76thNMS (Nishiyama Memorial Sem.), ISIJ, Tokyo, Japan, 2001, p. 1.
20. E. Doege, S. Kulp, and C. Sunderkotter:Steel Res., 2002, vol. 73 (6–7), pp. 303–08.10.1002/srin.200200213 ↗
21. A. Andersson:J. Mater. Proc. Technol., 2005, vol. 169 (3), pp. 352–56.10.1016/j.jmatprotec.2005.04.095 ↗
22. C. Greisert and J. Wesemann:Steel Res., 2002, vol. 73 (6–7), pp. 309–13.10.1002/srin.200200214 ↗
23. T. Ohwue, T. Yoshida, Y. Shirai, and T. Kikuma:Mater. Trans., 2003, vol. 44 (5), pp. 946–50.10.2320/matertrans.44.946 ↗
24. J.C. Lin and C.C. Tai:Int. J. Adv. Manuf. Technol., 1999, vol. 15 (3), pp. 163–70.10.1007/s001700050053 ↗
25. D.K. Leu:J. Mater. Proc. Technol., 1997, vol. 66 (1–3), pp. 9–17.10.1016/S0924-0136(96)02453-3 ↗
26. D.A. Smith:Die Design Handbook, 3rd ed., Society of Manufacturing Engineers, Dearborn, MI, 1990.
27. G. Sachs:Principles and Methods of Sheet Metal Fabricating, Reinhold Publishing Corp., New York, NY, 1951.
28. F.W. Wilson:Die Design Handbook, 1st ed., McGraw-Hill, Columbus, OH, 1955.
29. R.D. Webb and D.E. Hardt:J. Eng. Indus.-Trans. ASME, 1991, vol. 113, pp. 44–52.10.1115/1.2899621 ↗
30. C. Hindman and K.B. Ousterhout:J. Mater. Proc. Technol., 2000, vol. 99, pp. 38–48.10.1016/S0924-0136(99)00257-5 ↗
31. A.P. Karafillis and M.C. Boyce:Int. J. Mech. Sci., 1992, vol. 34, pp. 113–31.10.1016/0020-7403(92)90077-T ↗
32. A.P. Karafillis and M.C. Boyce:J. Mater. Proc. Technol., 1992, vol. 32, pp. 499–508.10.1016/0924-0136(92)90206-8 ↗
33. A.P. Karafillis and M.C. Boyce:Int. J. Mach. Tools Manuf., 1996, vol. 36, pp. 503–26.10.1016/0890-6955(95)00023-2 ↗
34. W. Gan and R.H. Wagoner:Int. J. Mech. Sci., 2004, vol. 46 (7), pp. 1097–113.10.1016/j.ijmecsci.2004.06.006 ↗
35. W. Gan, R.H. Wagoner, K. Mao, S. Price, and F. Rasouli:J. Mater. Proc. Technol., 2004, vol. 126 (4), pp. 360–67.10.1115/1.1789955 ↗
36. R. Lingbeek, J. Huetink, S. Ohnimus, M. Petzoldt, and J. Weiher:J. Mater. Proc. Technol., 2005, vol. 169 (1), pp. 115–25.10.1016/j.jmatprotec.2005.04.027 ↗
37. F.J. Gardiner:Trans. ASME, 1957, vol. 79, pp. 1–9.
38. W. Schroeder:Trans. ASME, 1943, vol. 65, pp. 817–27.
39. L. Papeleux and J.P. Ponthot:J. Mater. Proc. Technol., 2002, vol. 125, pp. 785–91.10.1016/S0924-0136(02)00393-X ↗
40. L. Sanchez, R.D. Robertson, and J.C. Gerdeen: SAE Paper 960595, Society of Automotive Engineers, Warrendale, PA, 1996.
41. B.W. Shaffer and R.N. House, Jr.:ASME J. Appl. Mech., 1955, vol. 22, pp. 305–10.10.1115/1.4011077 ↗
42. B.S. Levy:J. Appl. Metalworking, 1984, vol. 3, pp. 135–41.10.1007/BF02833692 ↗
43. L.M. Geng and R.H. Wagoner:Int. J. Mech. Sci., 2002, vol. 44, pp. 123–48.10.1016/S0020-7403(01)00085-6 ↗
44. W.D. Carden, L.M. Geng, D.K. Matlock and R.H. Wagoner:Int. J. Mech. Sci., 2002, vol. 44, pp. 79–101.10.1016/S0020-7403(01)00082-0 ↗
45. K.P. Li, W.D. Carden, and R.H. Wagoner:Int. J. Mech. Sci., 2002, vol. 44, pp. 103–22.10.1016/S0020-7403(01)00083-2 ↗
46. M. Huang and J.C. Gerdeen:Analysis of Autobody Stamping Technology, Society of Automotive Engineers, Warrendale, PA, 1994, 125–38.
47. T.X. Yu and W. Johnson:J. Mech. Working Technol., 1982, vol. 6 (1), pp. 5–21.10.1016/0378-3804(82)90016-X ↗
48. S.W. Lee and D.Y. Yang:J. Mater. Proc. Technol., 1998, vol. 80 (1), pp. 60–67.10.1016/S0924-0136(98)00177-0 ↗
49. W. Gan, P. Zhang, R.H. Wagoner, and G.S. Daehn:Int. J. Mater. Res. Adv. Technol., 2005, June, pp. 572–577.10.3139/146.101072 ↗
50. W. Gan, P. Zhang, R.H. Wagoner, and G.S. Daehn:Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2097–106.10.1007/BF02586130 ↗
51. D.F. Watt, X.Q. Xu, and D.J. Lloyd:Acta Mater., 1996, vol. 44 (2), pp. 789–99.10.1016/1359-6454(95)00209-X ↗
52. Y.L. Shenet al.:Acta Metall. Mater., 1995, vol. 43 (4), pp. 1701–22.10.1016/0956-7151(94)00346-J ↗
53. M. Ekh, R. Lillbacka, and K. Runesson:Int. J. Plast., 2004, vol. 20 (12), pp. 2143–59.10.1016/j.ijplas.2004.04.007 ↗
54. J.O. Andersson, T. Helander, L.H. Hoglundet al.:CALPHAD, 2002, vol. 26 (2), pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
55. E.O. Hall:Proc. Phys. Soc., Ser. B, 1951, vol. 64, pp. 747–53.10.1088/0370-1301/64/9/303 ↗
56. N.J. Petch:J. Iron Steel Inst., 1953, May, pp. 25–28.
57. E.F. Rauch and J.H. Schmitt:Mater. Sci. Eng. A, 1989, vol. 113, pp. 441–48.10.1016/0921-5093(89)90331-6 ↗
58. D.A. Hughes and N. Hansen:Acta Mater., 2000, vol. 48 (11), pp. 2985–3004.10.1016/S1359-6454(00)00082-3 ↗
59. Abaqus/Standard User’s Manual 6.5, ABAQUS, Inc., Providence, RI, 2004.
60. J.F. Wang, R.H. Wagoner, D.K. Matlock, and F. Barlat:Int. J. Solids Struct., 2005, vol. 42 (5–6), pp. 1287–1307.10.1016/j.ijsolstr.2004.08.017 ↗
61. J.F. Wang, R.H. Wagoner, D.K. Matlock, W.D. Carden, D.K. Matlock, and F. Barlat:Int. J. Plas., 2004, vol. 20 (12), pp. 2209–32.10.1016/j.ijplas.2004.05.008 ↗
62. S. Bugat, J. Besson, and A. Pineau:Comp. Mater. Sci., 1999, vol. 16 (1–4), pp. 158–66.10.1016/S0927-0256(99)00058-0 ↗
63. P. Dawson, D. Boyce, S. MacEwen, and R. Rogge:Metall. Mater. Trans. A., 2000, vol. 31 (6), pp. 1543–55.10.1007/s11661-000-0165-4 ↗
64. S.S. Babu, S.A. David, and M. Quintana:Welding J., 2001, vol. 80, pp. 91s-97s.