journal article·2011-10

Effect of Annealing on Thermal Stability, Precipitate Evolution, and Mechanical Properties of Cryorolled Al 7075 Alloy

Sushanta Kumar Panigrahi, R. Jayaganthan

Publisher page

Abstract

The effect of annealing on microstructural stability, precipitate evolution, and mechanical properties of cryorolled (CR) Al 7075 alloy was investigated in the present work employing hardness measurements, tensile test, X-ray diffraction (XRD), differential scanning calorimetry (DSC), electron backscattered diffraction (EBSD), and transmission electron microscopy (TEM). The solution-treated bulk Al 7075 alloy was subjected to cryorolling to produce fine grain structures and, subsequently, annealing treatment to investigate its thermal stability. The recrystallization of CR Al 7075 alloys started at an annealing temperature of 423 K (150 °C) and completed at an annealing temperature of 523 K (250 °C). The CR Al 7075 alloys with ultrafine-grained microstructure are thermally stable up to 623 K (350 °C). Within the range of 523 K to 623 K (250 °C to 350 °C), the size of small η phase particles and AlZr3 dispersoids lies within 300 nm. These small precipitate particles pin the grain boundaries due to the Zener pinning effect, which suppresses grain growth. The hardness and tensile strength of the CR Al 7075 alloys was reduced during the annealing treatment from 423 K to 523 K (150 °C to 250 °C) and subsequently it remains constant.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. K.O. Pedersen, H.J. Roven, O.G. Lademo, and O.S. Hopperstad: Mater. Sci. Eng. A, 2008, vol. 473, p. 81.10.1016/j.msea.2007.03.089 ↗
2. P. Sepehrband and S. Esmaeili: Mater. Sci. Eng. A, 2008, vol. 487, p. 309.10.1016/j.msea.2007.10.067 ↗
3. P. Guyot and L. Cottignies: Acta Mater., 1996, vol. 44, p. 4161.10.1016/S1359-6454(96)00033-X ↗
4. A Statistical Review on Aluminium Shipments by Major Market, United States and Canada, Alcoa Technical Center, Alcoa Center, PA, 2006.
5. Y. Wang, M. Chen, F. Zhou, and E. Ma: Nature, 2002, vol. 419, pp. 912–15.10.1038/nature01133 ↗
6. Y.H. Zhao, X.Z. Liao, S. Cheng, E. Ma, and Y.T. Zhu: Adv. Mater., 2006, vol. 18, p. 2280.10.1002/adma.200600310 ↗
7. S. Cheng, Y.H. Zhao, Y.T. Zhu, and E. Ma: Acta Mater., 2007, vol. 55, p. 5822.10.1016/j.actamat.2007.06.043 ↗
8. T. Shanmugasundaram, B.S. Murty, and V.S. Sarma: Scripta Mater., 2006, vol. 54, p. 2013.10.1016/j.scriptamat.2006.03.012 ↗
9. V.S. Sarma, J. Wang, W.W. Jian, A. Kauffmann, H. Conrad, J. Freudenberger, and Y.T. Zhu: Mater. Sci. Eng. A, 2010, vol. 527, p. 7624.10.1016/j.msea.2010.08.015 ↗
10. T. Konkova, S. Mironov, A. Korznikov, and S.L. Semiatin: Acta Mater., 2010, vol. 58, p. 5862.10.1016/j.actamat.2010.05.056 ↗
11. S.K. Panigrahi and R. Jayaganthan: Mater. Sci. Eng. A, 2008, vol. 480, p. 299.10.1016/j.msea.2007.07.024 ↗
12. S.K. Panigrahi, R. Jayaganthan, and V. Chawla: Mater. Lett., 2008, vol. 62, p. 2626.10.1016/j.matlet.2008.01.003 ↗
13. S.K. Panigrahi, R. Jayaganthan, and V. Pancholi: Mater. Des., 2009, vol. 30, p. 1894.10.1016/j.matdes.2008.09.022 ↗
14. S.K. Panigrahi, R. Jayaganthan, V. Pancholi, and M. Gupta: Mater. Chem. Phys., 2010, vol. 122, p. 188.10.1016/j.matchemphys.2010.02.032 ↗
15. S.K. Panigrahi and R. Jayaganthan: Metall. Mater. Trans. A, 2010, vol. 41A, p. 2675.10.1007/s11661-010-0328-x ↗
16. S.K. Panigrahi and R. Jayaganthan: Trans. Ind. Inst. Met., 2008, vol. 61, p. 159.10.1007/s12666-008-0028-z ↗
17. S.K. Panigrahi and R. Jayaganthan: Mater. Sci. Forum, 2008, vol. 584, p. 734.10.4028/www.scientific.net/MSF.584-586.734 ↗
18. T.R. Lee, C.P. Chang, and P.W. Kao: Mater. Sci. Eng. A, 2005, vol. 408, p. 131.10.1016/j.msea.2005.07.045 ↗
19. E. Ma: Scripta Mater., 2003, vol. 49, p. 663.10.1016/S1359-6462(03)00396-8 ↗
20. H.V. Swygenhoven and J.R. Weertman: Scripta Mater., 2003, vol. 49, p. 625.10.1016/S1359-6462(03)00399-3 ↗
21. Y.T. Zhu and X.Z. Liao: Nat. Mater., 2004, vol. 3, p. 351.10.1038/nmat1141 ↗
22. R. Kaibyshev, T. Sakai, F. Musin, I. Nikulin, and H. Miura: Scripta Mater., 2001, vol. 45, p. 1373.10.1016/S1359-6462(01)01172-1 ↗
23. I. Nikulin, R. Kaibyshev, and T. Sakai: Mater. Sci. Eng. A, 2005, vol. 407, p. 62.10.1016/j.msea.2005.06.014 ↗
24. Z.Y. Ma, R.S. Mishra, and M.W. Mahoney: Acta Mater., 2002, vol. 50, p. 4419.10.1016/S1359-6454(02)00278-1 ↗
25. R.S. Mishra, M.W. Mahoney, S.X. McFadden, N.A. Mara, and A.K. Mukherjee: Scripta Mater., 2000, vol. 42, p. 163.10.1016/S1359-6462(99)00329-2 ↗
26. X. Cheng, M. Furukawa, Z. Horita, and T.G. Langdon: Acta Mater., 2003, vol. 51, p. 6139.10.1016/S1359-6454(03)00286-6 ↗
27. X. Cheng, W. Dixon, M. Furukawa, Z. Horita, and T.G. Langdon: Mater. Lett., 2003, vol. 57, p. 3588.10.1016/S0167-577X(03)00130-7 ↗
28. T.G. Langdon: Mater. Sci. Eng. A, 1991, vol. 137, p. 1.10.1016/0921-5093(91)90312-B ↗
29. R.S. Mishra and A.K. Mukherjee: Mater. Sci. Eng. A, 1997, vol. 234, p. 1023.10.1016/S0921-5093(97)00321-3 ↗
30. Y. Ma, M. Furukawa, Z. Horita, M. Nemoto, R.Z. Valiev, and T.G. Langdon: Mater. Trans., 1996, vol. 37, p. 336.10.2320/matertrans1989.37.336 ↗
31. M. Dixit, R.S. Mishra, and K.K. Sankaran: Mater. Sci. Eng. A, 2008, vol. 478, p. 163.10.1016/j.msea.2007.05.116 ↗
32. Y.H. Zhao, X.Z. Liao, Y.T. Zhu, R.Z. Valiev: J. Mater. Res., 2005, vol. 20, p. 288.10.1557/JMR.2005.0057 ↗
33. Y.H. Zhao, X.Z. Liao, Z. Jin, R.Z. Valiev, and Y.T. Zhu: Acta Mater., 2004, vol. 52, p. 4589.10.1016/j.actamat.2004.06.017 ↗
34. N. Rangaraju, T. Raghuram, B.V. Krishna, K.P. Rao, and P. Venugopal: Mater. Sci. Eng. A, 2005, vol. 398, p. 246.10.1016/j.msea.2005.03.026 ↗
35. Y.B. Lee, D.H. Shin, K.T. Park, and W.J. Nam: Scripta Mater., 2004, vol. 51, p. 355.10.1016/j.scriptamat.2004.02.037 ↗
36. S.K. Panigrahi and R. Jayaganthan: J. Mater. Sci., 2010, vol. 45, p. 5624.10.1007/s10853-010-4627-9 ↗
37. S.K. Panigrahi and R. Jayaganthan: Mater. Sci. Eng. A, 2008, vol. 492, p. 300.10.1016/j.msea.2008.03.029 ↗
38. R. Jayaganthan and S.K. Panigrahi: Mater. Sci. Forum, 2008, vol. 584, p. 911.10.4028/www.scientific.net/MSF.584-586.911 ↗
39. X.J. Jiang, B. Noble, B. Holme, G. Waterloo, and J. Tafto: Metall. Mater. Trans. A, 2000, vol. 31A, p. 339.10.1007/s11661-000-0269-x ↗
40. C. Antonione, F. Marino, and G. Riontino: Mater. Chem. Phys., 1988, vol. 20, p. 13.10.1016/0254-0584(88)90055-7 ↗
41. J.D. Embury and R.B. Nicholson: Acta Metall., 1965, vol. 13, p. 403.10.1016/0001-6160(65)90067-2 ↗
42. Y.H. Zhao, X.Z. Liao, Z. Jin, R.Z. Valiev, and Y.T. Zhu: Acta Mater., 2004, vol. 52, p. 4589.10.1016/j.actamat.2004.06.017 ↗
43. B.L. Ou, J.G. Yang, and M.Y. Wei: Metall. Mater. Trans. A, 2007, vol. 38A, p. 1960.
44. A. Deshchamps and Y. Brechet: Mater. Sci. Eng. A, 1998, vol. 251, p. 200.10.1016/S0921-5093(98)00615-7 ↗
45. C.Y. Nam, J.H. Han, Y.H. Chung, and M.C. Shin: Mater. Sci. Eng. A, 2003, vol. 347, p. 253.10.1016/S0921-5093(02)00597-X ↗
46. R.D. Doherty: Mater. Sci., 1982, vol. 16, p. 1.
47. S.K. Panigrahi: Ph.D. Thesis, IIT Roorkee, India, 2009, p. 264.