journal article·2004-06

Achieving enhanced ductility in a dilute magnesium alloy through severe plastic deformation

Kiyoshi Matsubara, Yuichi Miyahara, Zenji Horita, Terence G. Langdon

Publisher page

Abstract

Experiments were conducted to evaluate the utility of a new processing procedure developed for Mg-based alloys in which samples are subjected to a two-step processing route of extrusion followed by equal-channel angular pressing (designated as EX-ECAP). The experiments were conducted using a Mg-0.6 wt pct Zr alloy and, for comparison purposes, samples of pure Mg. It is shown that the potential for successfully using ECAP increases in both materials when adopting the EX-ECAP procedure. For the Mg-Zr alloy, the use of EX-ECAP produces a grain size of ∼1.4 µm when the pressing is undertaken at 573 K. By contrast, using EX-ECAP with pure Mg at 573 K produces a grain size of ∼26 µm. Tensile testing of the Mg-Zr alloy at 523 and 573 K after processing by EX-ECAP revealed the occurrence of significantly enhanced ductilities with maximum elongations of ∼300 to 400 pct.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. F.H. Froes, D. Eliezer, and E. Aghion: JOM, 1998, vol. 50 (9), pp. 30–34.10.1007/s11837-998-0411-6 ↗
2. K. Johnson: Adv. Mater. Proc., 2002, vol. 160 (6), pp. 62–65.
3. H. Friedrich and S. Schumann: J. Mater. Proc. Technol., 2001, vol. 117, pp. 276–81.10.1016/S0924-0136(01)00780-4 ↗
4. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Progr. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
5. V.M. Segal, V.I. Reznikov, A.E. Drobyshevskiy, and V.I. Kopylov: Russ. Metall., 1981, vol. 1, pp. 99–105.
6. V.M. Segal: Mater. Sci. Eng., 1995, vol. A197, pp. 157–64.10.1016/0921-5093(95)09705-8 ↗
7. M. Furukawa, Z. Horita, M. Nemoto, and T.G. Langdon: J. Mater. Sci., 2001, vol. 36, pp. 2835–43.10.1023/A:1017932417043 ↗
8. N.A. Smirnova, V.I. Levit, V.I. Pilyugin, L.S. Davydova, and V.A. Sazonova: Fiz. Metall. Metalloved., 1986, vol. 61, pp. 1170–77.
9. A.P. Zhilyaev, S. Lee, G.V. Nurislamova, R.Z. Valiev, and T.G. Langdon: Scripta Mater., 2001, vol. 44, pp. 2753–58.10.1016/S1359-6462(01)00955-1 ↗
10. A.P. Zhilyaev, G.V. Nurislamova, B.-K. Kim, M.D. Baró, J.A. Szpunar, and T.G. Langdon: Acta Mater., 2003, vol. 51, pp. 753–65.10.1016/S1359-6454(02)00466-4 ↗
11. Y. Iwahashi, Z. Horita, M. Nemoto and T.G. Langdon: Acta Mater., 1997, vol. 45, pp. 4733–41.10.1016/S1359-6454(97)00100-6 ↗
12. Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon: Acta Mater., 1998, vol. 46, pp. 3317–31.10.1016/S1359-6454(97)00494-1 ↗
13. J. Wang, Y. Iwahashi, Z. Horita, M. Furukawa, M. Nemoto, R.Z. Valiev, and T.G. Langdon: Acta Mater., 1996, vol. 44, pp. 2973–82.10.1016/1359-6454(95)00395-9 ↗
14. Z. Horita, D.J. Smith, M. Furukawa, M. Nemoto, R.Z. Valiev, and T.G. Langdon: J. Mater. Res., 1996, vol. 11, pp. 1880–90.10.1557/JMR.1996.0239 ↗
15. P.B. Berbon, N.K. Tsenev, R.Z. Valiev, M. Furukawa, Z. Horita, M. Nemoto, and T.G. Langdon: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2237–43.10.1007/s11661-998-0101-6 ↗
16. Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2503–10.10.1007/s11661-998-0222-y ↗
17. Z. Horita, T. Fujinami, and T.G. Langdon: Mater. Sci. Eng., 2001, vol. A318, pp. 34–41.10.1016/S0921-5093(01)01339-9 ↗
18. K. Nakashima, Z. Horita, M. Nemoto, and T.G. Langdon: Mater. Sci. Eng., 2000, vol. A281, pp. 82–87.10.1016/S0921-5093(99)00744-3 ↗
19. Y. Nishida, H. Arime, J.-C. Kim, and T. Ando: Scripta Mater., 2001, vol. 45, pp. 261–66.10.1016/S1359-6462(01)00985-X ↗
20. A. Azushima and K. Aoki: Mater. Sci. Eng., 2002, vol. A337, pp. 45–49.10.1016/S0921-5093(02)00005-9 ↗
21. Y. Saito, H. Utsunomiya, H. Suzuki, and T. Sakai: Scripta Mater., 2000, vol. 42, pp. 1139–44.10.1016/S1359-6462(00)00349-3 ↗
22. J.-C. Lee, H.-K. Seok, J.-H. Han, and Y.-H. Chung: Mater. Res. Bull., 2001, vol. 36, pp. 997–1004.10.1016/S0025-5408(01)00557-8 ↗
23. J.-H. Han, H.-K. Seok, Y.-H. Chung, M.-C. Shin, and J.-C. Lee: Mater. Sci. Eng., 2002, vol. A323, pp. 342–47.10.1016/S0921-5093(01)01389-2 ↗
24. J.-C. Lee, H.-K. Seok, J.-Y. Suh, J.-H. Han, and Y.-H. Chung: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 665–73.10.1007/s11661-002-0128-z ↗
25. J.-C. Lee, H.-K. Seok, and J.-Y. Suh: Acta Mater., 2002, vol. 50, pp. 4005–19.10.1016/S1359-6454(02)00200-8 ↗
26. M. Mabuchi, H. Iwasaki, K. Yanase, and K. Higashi: Scripta Mater., 1997, vol. 36, pp. 681–86.10.1016/S1359-6462(96)00444-7 ↗
27. M. Mabuchi, K. Ameyama, H. Iwasaki, and K. Higashi: Acta Mater., 1999, vol. 47, pp. 2047–57.10.1016/S1359-6454(99)00094-4 ↗
28. T. Mukai, M. Yamanoi, H. Watanabe, and K. Higashi: Scripta Mater., 2001, vol. 45, pp. 89–94.10.1016/S1359-6462(01)00996-4 ↗
29. H. Watanabe, T. Mukai, K. Ishikawa, and K. Higashi: Scripta Mater., 2002, vol. 46, pp. 851–56.10.1016/S1359-6462(02)00064-7 ↗
30. W.J. Kim, C.W. An, Y.S. Kim, and S.I. Hong: Scripta Mater., 2002, vol. 47, pp. 39–44.10.1016/S1359-6462(02)00094-5 ↗
31. A. Yamashita, Z. Horita, and T.G. Langdon: Mater. Sci. Eng., 2001, vol. A300, pp. 142–47.10.1016/S0921-5093(00)01660-9 ↗
32. Z. Horita, K. Matsubara, K. Makii, and T.G. Langdon: Scripta Mater., 2002, vol. 47, pp. 255–60.10.1016/S1359-6462(02)00135-5 ↗
33. K. Matusbara, Y. Miyahara, Z. Horita, and T.G. Langdon: Acta Mater., 2003, vol. 51, pp. 3073–84.10.1016/S1359-6454(03)00118-6 ↗
34. J.A. Chapman and D.V. Wilson: J. Inst. Met., 1962–63, vol. 91, pp. 39–40.
35. K.U. Kainer: Proc. 3rd Int. Magnesium Conf., G.W. Lorimer, ed., The Institute of Materials, London, 1997, pp. 533–43.
36. D.V. Wilson: J. Inst. Met., 1970, vol. 98, pp. 133–43.
37. M. Hilpert, A. Styczynski, J. Kiese, and L. Wagner: in Magnesium Alloys and Their Applications, B.L. Mordike and K.U. Kainer, eds., Wiley-VCH, Weinheim, Germany, 1998, pp. 319–24.
38. G.F. Weissmann and W. Babington: Proc. ASTM, 1958, vol. 58, pp. 869–86.
39. A.A. Nayeb-Hashemi and J.R. Clark: Binary Alloy Phase Diagrams, T. Massalski, ed., ASM, Metals Park, OH, 1986, pp. 1566–67.
40. Y. Iwahashi, J. Wang, Z. Horita, M. Nemoto, and T.G. Langdon: Scripta Mater., 1996, vol. 35, pp. 143–46.10.1016/1359-6462(96)00107-8 ↗
41. C. Xu and T.G. Langdon: Scripta Mater., 2003, vol. 48, pp. 1–4.10.1016/S1359-6462(02)00354-8 ↗
42. M. Furukawa, Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon: Mater. Sci. Eng., 1998, vol. A257, pp. 328–32.10.1016/S0921-5093(98)00750-3 ↗
43. M. Furukawa, Z. Horita, and T.G. Langdon: Mater. Sci. Eng., 2002, vol. A332, pp. 97–109.10.1016/S0921-5093(01)01716-6 ↗
44. T.G. Langdon: Metall. Trans. A, 1982, vol. 13A, pp. 689–701.10.1007/BF02642383 ↗
45. J. Wang, Z. Horita, M. Furukawa, M. Nemoto, N.K. Tsenev, R.Z. Valiev, Y. Ma, and T.G. Langdon: J. Mater. Res., 1993, vol. 8, pp. 2810–18.10.1557/JMR.1993.2810 ↗
46. Z. Horita, D.J. Smith, M. Nemoto, R.Z. Valiev, and T.G. Langdon: J. Mater. Res., 1998, vol. 13, pp. 446–50.10.1557/JMR.1998.0057 ↗
47. K. Oh-ishi, Z. Horita, D.J. Smith, and T.G. Langdon: J. Mater. Res., 2001, vol. 16, pp. 583–89.10.1557/JMR.2001.0084 ↗
48. S. Komura, Z. Horita, M. Furukawa, M. Nemoto, and T.G. Langdon: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 707–16.10.1007/s11661-001-0087-9 ↗
49. S. Lee, M. Furukawa, Z. Horita, and T.G. Langdon: Mater. Sci. Eng., 2003, vol. A342, pp. 294–301.10.1016/S0921-5093(02)00319-2 ↗
50. X. Wu and Y. Liu: Scripta Mater., 2002, vol. 46, pp. 269–74.10.1016/S1359-6462(01)01234-9 ↗
51. J.C. Tan and M.J. Tan: Scripta Mater., 2002, vol. 47, pp. 101–06.10.1016/S1359-6462(02)00101-X ↗
52. W.-J. Kim, S.W. Chung, C.S. Chung, and D. Kum: Acta Mater., 2001, vol. 49, pp. 3337–45.10.1016/S1359-6454(01)00008-8 ↗
53. A. Wisbey and M.W. Kearns: in Superplasticity: 60 Years after Pearson, N. Ridley, ed., The Institute of Materials, London, 1995, pp. 305–23.
54. C.F. Dressel: in Superplasticity: 60 Years after Pearson, N. Ridley, ed., The Institute of Materials, London, 1995, pp. 359–76.
55. T.G. Langdon: Acta Metall. Mater., 1994, vol. 42, pp. 2437–43.10.1016/0956-7151(94)90322-0 ↗
56. S.S. Vagarali and T.G. Langdon: Acta Metall., 1982, vol. 30, pp. 1157–70.10.1016/0001-6160(82)90009-8 ↗