journal article·2008-01

Microstructure and Mechanical Properties of Microalloyed High-Strength Transformation-Induced Plasticity Steels

X.D. Wang, B.X. Huang, L. Wang, Y.H. Rong

Publisher page

Abstract

The high strength of transformation induced plasticity (TRIP) steels with tensile strength from 800 to 1000 MPa were designed based on grain refinement and precipitation strengthening through microalloying with Nb, Nb/V, and Nb/Mo in a Fe-0.2C-1.5Si-1.5Mn cold-rolled TRIP steel. The origins of alloying strengthening for three grades of 860, 950, and 1010 MPa TRIP steels obtained in this work were revealed by the combination of Thermo-Calc and transmission electron microscopy (TEM). The addition of Nb in Nb, Nb/V, and Nb/Mo TRIP steels can effectively refine the austenite grain in the hot-rolled process by the NbC carbides retarding austenite recrystallization and, in turn, refine final microstructure after intercritical annealing. The addition of Nb/V can precipitate partially fine and dispersive (Nb,V)C carbides in ferrite grains instead of coarse NbC carbides; therefore, the precipitation strengthening plays an important role in the increase of TRIP steel strength. The addition of Nb/Mo cannot only precipitate fully fine and dispersive (Nb,Mo)C carbides in ferrite grains but also increase the volume fraction of bainite accompanying the decrease of volume fraction of ferrite, leading to the drastic increase of both the yield strength and tensile strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Y. Sakuma: Proc. of “Int. Conf. on Advanced High Strength Sheet Steels for Automotive Applications,” CO, 2004, Association for Iron & Steel Technology, Warrendale, PA, 2004, pp. 11–18
2. E.V. Pereloma, I.B. Timokhina, K.F. Russell, M.K Miller: Scripta Mater., 2006, vol. 54, pp. 471–7610.1016/j.scriptamat.2005.10.008 ↗
3. K.I. Sugimoto, T. Muramatsu, S.I. Hashimoto, Y. Mukai: J. Mater. Process. Technol., 2006, vol. 177, pp. 390–9510.1016/j.jmatprotec.2006.03.186 ↗
4. W. Bleck, A. Frehn, E. Kechagias, J. Ohlert, K. Hulka: Mater. Sci. Forum, 2003, vols. 426–432, pp. 43–4810.4028/www.scientific.net/MSF.426-432.43 ↗
5. E.V. Pereloma, I.B. Timokhina, P.D. Hodgson: Mater. Sci. Eng. A, 1999, vols. 273–275, pp. 448–5210.1016/S0921-5093(99)00325-1 ↗
6. K. Nagayama, T. Terasaki, K. Tanaka, F.D. Fischer, T. Antretter, G. Cailletaud, F. Azzouz: Mater. Sci. Eng. A, 2001, vol. 308, pp. 25–3710.1016/S0921-5093(00)01999-7 ↗
7. W. Shi, L. Li, C.X. Yang, R.Y. Fu, L. Wang, P. Wollants: Mater. Sci. Eng. A, 2006, vol. 429, pp. 247–5110.1016/j.msea.2006.05.069 ↗
8. C. Scott, P. Maugis, P. Barges, and M. Goune: Proc. of “Int. Conf. on Advanced High Strength Sheet Steels for Automotive Applications,” CO, 2004, Association for Iron & Steel Technology, Warrendale, PA, 2004, pp. 181–93
9. S. Hashimoto, S. Ikeda, K.I. Sugimoto, S. Miyake: ISIJ Int., 2004, vol. 44, pp. 1590–9810.2355/isijinternational.44.1590 ↗
10. D.J. Dyson, B. Holmes: J. Iron Steel Inst., 1970, vol. 208, pp. 469–74
11. X.D. Wang, B.X. Huang, Y.H. Rong, L. Wang: Mater. Sci. Eng. A, 2006, vols. 438–440, pp. 300–0510.1016/j.msea.2006.02.149 ↗
12. E. Girault, P. Jacques, Ph. Harlet: Mater. Charact., 1998, vol. 40, pp. 111–1810.1016/S1044-5803(97)00154-X ↗
13. H.K.D.H. Bhadeshia, D.V. Edmonds: Acta Metall., 1980, vol. 28, pp. 1265–7310.1016/0001-6160(80)90082-6 ↗
14. B.C. De Cooman: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 285–30310.1016/j.cossms.2004.10.002 ↗
15. G.M. Michal, J.A. Sloane: Metall. Trans. A, 1986, vol. 17A, pp. 1287–9410.1007/BF02650109 ↗
16. D.V. Edmonds, K. He, F.C. Rizzo, B.C. DeCooman, D.K. Matlock, J.G. Speer: Mater. Sci. Eng. A, 2006, vols. 438–440, pp. 25–3410.1016/j.msea.2006.02.133 ↗
17. X.D. Wang, B.X. Huang, Y.H. Rong, L. Wang: J. Mater. Sci. Technol., 2006, vol. 22, pp. 625–28
18. X.D. Wang, B.X. Huang, Y.H. Rong, and L. Wang: Proc. 3rd Int. Conf. on Advanced Structural Steels, Gyeongju, Korea, Aug. 2006, Committee of ICASS, Gyeongju, Korea, 2006, pp. 1152–55
19. T. Wada, H. Wada, J.F. Elliot, J. Chipman: Metall. Trans., 1972, vol. 3, pp. 2865–7210.1007/BF02652854 ↗
20. I.B. Timokhina, P.D. Hodgson, and E.V. Pereloma: Proc. of “Int. Conf. on TRIP-Aided High Strength Ferrous Alloys,” Ghent, June 2002, Wissenschaftsverlag Mainz GmbH, Aachen, Germany, 2002, pp. 153–58
21. S. Hashimoto, S. Ikeda, K. Sugimoto, and S. Miyake: Proc. of “Int. Conf. on Advanced High Strength Sheet Steels for Automotive Applications,” CO, 2004, Association for Iron & Steel Technology, Warrendale, PA, 2004, pp. 195–203
22. G.M. Michal, I.E. Locci: Scripta Metall., 1988, vol. 22, pp. 1801–0610.1016/S0036-9748(88)80288-6 ↗
23. M. Bouet, J. Root, E. Es-Sadeqi, S. Yue: Mater. Sci. Forum, 1998, vols. 284–286, pp. 319–2610.4028/www.scientific.net/MSF.284-286.319 ↗
24. W.B. Lee, S.G. Hong, C.G. Park, S.H. Park: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1689–9810.1007/s11661-002-0178-2 ↗