journal article·2014-01

Ferrite Effects in Fe-Mn-Al-C Triplex Steels

Auriane Etienne, Véronique Massardier-Jourdan, Sophie Cazottes, Xavier Garat, Michel Soler, Ian Zuazo, Xavier Kleber

Publisher page

Abstract

In order to determine the ferrite effect on tensile properties of Fe-28.8Mn-9.4Al-C Triplex steels, four Triplex steel sheets with different carbon contents were solution treated under various conditions leading to different ferrite fractions ranging from 0 to 39 pct. This approach was used as it was very difficult to prepare samples with a wide range of ferrite contents from only one grade. However, in order to isolate the ferrite effect from this approach, it was necessary to precisely know the effect of the austenite carbon content and that of the austenite grain size on tensile properties of fully austenitic samples. This is why, a preliminary study was performed to assess these two effects, which required a thorough analysis of the microstructures of the investigated samples combining electron backscattered diffraction experiments and transmission electron microscopy observations. The study of fully austenitic samples led us to the conclusion that a decrease in the austenite grain size leads to higher strength and lower elongation and that the austenite carbon content has a greatly significant influence on tensile properties. However, this influence was difficult to estimate with a very good accuracy. Finally, the study of samples with different ferrite contents showed that ferrite had a positive effect on strength when its content was lower than 5 pct. In contrast, a higher content of ferrite (more than 30 pct) has a deleterious effect on mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. G. Frommeyer, U. Brüx: Steel Research Int., 2006, 77, pp. 627-633.10.1002/srin.200606440 ↗
2. W.K. Choo, J.H. Kim, J.C. Yoon: Acta Metallurgica, 1997,45, pp. 4877-4885.
3. D. Ponge: Structural Materials—Steels, Presentation at Marie Curie Summer School, Hürtgenwald, Germany, August 8–17, 2005.
4. K. Choi, C.-H. Seo, H. Lee, S.K. Kim, J. H. Kwak, K. G. Chin, K.-T. Park, N. J. Kim, Scripta Materialia: 2010, 63, pp. 1028-1031.10.1016/j.scriptamat.2010.07.036 ↗
5. R.A. Howell, D.C. Van Aken, AIST Transactions: 2009, Vol. 6, No.4, pp. 192-212.
6. I.S. Kalashnikov, O. Acselrad, A. Shalkevich, L.D. Chumakova, L.C. Pereira: Journal of Materials Processing Technology, 2003, 136, pp. 72-79.10.1016/S0924-0136(02)00937-8 ↗
7. Y. Kimura, K. Handa, K. Hayashi, Y. Mishima, Intermetallics : 2004, 12, pp. 607-617.10.1016/j.intermet.2004.03.010 ↗
8. K.T. Luo, P.-W. Kao, D. Gan, Materials Science and Engineering A: 1992, 151, pp. L15-L18.10.1016/0921-5093(92)90195-7 ↗
9. J. D. Yoo, S.W. Hwang, K.-T. Park, Materials Science and Engineering A: 2009, 508, pp. 234-240.10.1016/j.msea.2008.12.055 ↗
10. S.W. Hwang, J.H. Ji, E.G. Lee, K.-T. Park, Materials Science and Engineering A: 2011, 528, pp. 5196-5203.10.1016/j.msea.2011.03.045 ↗
11. S.C. Chang, Y.H. Hsiau, M. T. Jahn, Journal of Materials Science: 1989, 24, pp. 1117-1120.10.1007/BF01148807 ↗
12. R. Oshima, C.M. Wayman, Metallurgical Transactions: 1972, 3, pp. 2163-2169.10.1007/BF02643228 ↗
13. C.C. Wu, J.S. Chou, T.F. Liu, Metallurgical Transactions A: 1991, 22A, pp. 2265-2276.10.1007/BF02664992 ↗
14. K. Ishida, H. Ohtani, N. Satoh, R. Kainuma, and T. Nishizawa, ISIJ Int.: 1990, 30, pp. 680–686.10.2355/isijinternational.30.680 ↗
15. J.E. Krzanowski, Metallurgical Transactions A: 1988,19, pp. 1873-1876.10.1007/BF02645157 ↗
16. M.-S. Chen, H.-C. Cheng, C.-F. Huang, C.-Y. Chao, K.-L. Ou, C.-H. Yu, Materials Characterization: 2010,61, pp. 206-211.10.1016/j.matchar.2009.11.011 ↗
17. L. Samek and E. Arenholz: High Manganese Steel: Material Properties, Processing And Potential Cold-Rolled Applications, Presented at METAL 2012, 23–25 May 2012, Brno, Czech Republic.
18. I. Kalashnikov, O. Acslerad, A. Shalkevich, L.C. Pereira, Journal of Materials Engineering and Performance: 2000, 9, pp. 597-602.10.1361/105994900770345430 ↗
19. O. Bouaziz, HH. Zurob, B. Chehab, J.D. Embury, S. Allain, M. Huang, Materials Science and Technology: 2011, 27, pp. 707-709.10.1179/026708309X12535382371852 ↗