Characterization of the Microstructures and the Cryogenic Mechanical Properties of Electron Beam Welded Inconel 718
Source abstract
Abstract
The microstructures and the cryogenic mechanical properties of electron beam (EB) welds between cast and forged Inconel 718 superalloys with a thickness of 10 mm were investigated in comparison with gas tungsten arc (GTA) welds. EB welding with a heat input lower than 250 J/mm caused the formation of liquation microfissuring in the cast-side heat-affected-zone (HAZ) of the EB welds. HAZ liquation microfissuring appeared to be associated with the constitutional liquation of primary NbC carbides at the grain boundaries. Compared with the GTA welding process, the EB welding produced welds with superior microstructure, exhibiting fine dendritic structure associated with the reduction in size and fraction of the Laves phase due to the rapid cooling rate. This result was responsible for the superior mechanical properties of the EB welds at 77 K (−196 °C). Laves particles in both welds were found to provide the preferential site for the crack initiation and propagation, leading to a significant decrease in the Charpy impact toughness at 77 K (−196 °C). Crack initiation and propagation induced by Charpy impact testing were discussed in terms of the dendrite arm spacing, the Laves size and the dislocation structure ahead of the crack arisen from the fractured Laves phase in the two welds.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Additive Manufacturing Materials and Processes · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. H.L. Eiselstein: Advances in the Technology of Stainless Steels and Related Alloys, Philadelphia, PA: ASTM STP (American Society for Testing and Materials; Special technical publication) 369, 1965, pp. 62-79.10.1520/STP43733S ↗
2. D.D. Krueger: Proc. Conf. Superalloy 718-Metall. and Appl., E.A. Loria, ed., TMS, The Mineral, Metals and Materials Society. Warrendale, PA, 1989, pp. 279–96.
3. M. Sundararaman, P. Mukhopadhyay and S. Banerjee: Metall. Trans. A, 1992, vol. 23A, pp. 2015-28.10.1007/BF02647549 ↗
4. G.A. Knorovsky, M.J. Cieslak, T.J. Headley, A.D. Romig, Jr. and W.F. Hammetter: Metall. Trans. A, 1989, vol. 20A, pp. 2149-58.10.1007/BF02650300 ↗
5. A.K. Abdul Jawwad, M. Strangwood and C.L. Davis: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1237-47.10.1007/s11661-005-0216-y ↗
6. K. Sivaprasad and S. Ganesh Sundara Raman: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2115-27.10.1007/s11661-008-9553-y ↗
7. A. Ulas and E. Boysan: Aerospace Sci. Tech., 2013, vol. 24, pp. 187-97.10.1016/j.ast.2011.11.006 ↗
8. C.H. Radhakrishna and K. Prasad Rao: J. Mater. Sci., 1997, vol. 32, pp. 1977-84.10.1023/A:1018541915113 ↗
9. C.A. Huang, T.H. Wang, C.H. Lee and W.C. Han: Mater. Sci. Eng. A, 2005, vol. 398, pp. 275-81.10.1016/j.msea.2005.03.029 ↗
10. N.L. Richards, X. Huang and M.C. Chaturvedi: Mater. Charact., 1992, vol. 28, pp. 179-87.10.1016/1044-5803(92)90080-2 ↗
11. W.A. Baeslack III and D.E. Nelson: Metallography, 1986, vol. 19, pp. 371-9.10.1016/0026-0800(86)90024-8 ↗
12. W.A. Baeslack, S.L. West and T.J. Kelly: Scripta Metall., 1988, vol. 22, pp. 729-34.10.1016/S0036-9748(88)80191-1 ↗
13. S.L. West, W.A. Baeslack III and T.J. Kelly: Metallography, 1989, vol. 23, pp. 219-29.10.1016/0026-0800(89)90033-5 ↗
14. S.H. Bae, S.I. Kwon, J.G. Yoon, J.H. Lee, J.H. Do, I.S. Kim, B.G. Choi, C.Y. Jo and H.U. Hong: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 537-42.10.1007/s11661-013-2133-9 ↗
15. A. Gregori: Report No. 13190.01/03/1164.03, The Welding Institute, UK, August 2003.
16. M.J. Cieslak, T.J. Headley, G.A. Knorovsky, A.D. Romig and T. Kollie: Metall. Trans. A, 1990, vol. 21A, pp. 479-88.10.1007/BF02782428 ↗
17. G.D. Janaki Ram, A. Venugopal Reddy, K. Prasad Rao, G.M. Reddy and J.K. Sarin Sundar: J. Mater. Process. Tech., 2005, vol. 167, pp. 73-82.10.1016/j.jmatprotec.2004.09.081 ↗
18. D. Cai, W. Zhang, P. Nie, W. Liu and M. Yao: Mater. Charact., 2007, vol. 58, pp. 220-5.10.1016/j.matchar.2006.04.020 ↗
19. M. Sundararaman, P. Mukhopadhyay and S. Banerjee: Metall. Trans. A, 1988, vol. 19A, pp. 453-65.10.1007/BF02649259 ↗
20. K.R. Vishwakarma, N.L. Richards and M.C. Chaturvedi: Mater. Sci. Eng. A, 2008, vol. 480, pp. 517-28.10.1016/j.msea.2007.08.002 ↗
21. R.G. Thompson, B. Radhakrishnan, and D.E. Mayo: Proc. Conf. Superalloy 718-Metall. and Appl., E.A. Loria, ed., TMS, The Mineral, Metals and Materials Society. Warrendale, PA, 1989, pp. 437–55.10.7449/1989/Superalloys_1989_437_455 ↗
22. X. Huang, M.C. Chaturvedi and N.L. Richards: Metall. Mater. Trans. A, 1996, 27A, pp. 785-90.10.1007/BF02648966 ↗
23. J.J. Pepe and W.F. Savage: Weld. J., 1968, vol. 46, pp. 411s-22s.
24. J.N. Dupont, C.V. Robino, J.R. Michael, M.R. Notis and A.R. Marder: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2785-96.10.1007/s11661-998-0319-3 ↗
25. A. Odabaşi, N. Ünlü, G. Göller and M.N. Eruslu: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2357-65.10.1007/s11661-010-0319-y ↗
26. H.M. Wang, J.H. Zhang, Y.J Tang, Z.Q. Hu, N. Yukawa, M. Morinaga and Y. Murata: Mater. Sci. Eng. A, 1992, vol. 156, pp. 109-16.10.1016/0921-5093(92)90421-V ↗
27. W.J. Mills: Welding Research Suppl. to Weld. J., 1984, 22, pp. 237s-45s.