Effect of Combined Addition of Cu and Aluminum Oxide Nanoparticles on Mechanical Properties and Microstructure of Al-7Si-0.3Mg Alloy
Source abstract
Abstract
In this study, an ultrasonic cavitation based dispersion technique was used to fabricate Al-7Si-0.3Mg alloyed with Cu and reinforced with 1 wt pct Al2O3 nanoparticles, in order to investigate their influence on the mechanical properties and microstructures of Al-7Si-0.3Mg alloy. The combined addition of 0.5 pct Cu with 1 pct Al2O3 nanoparticles increased the yield strength, tensile strength, and ductility of the as-cast Al-7Si-0.3Mg alloy, mostly due to grain refinement and modification of the eutectic Si and θ-CuAl2 phases. Moreover, Al-7Si-0.3Mg-0.5Cu-1 pct Al2O3 nanocomposites after T6 heat treatment showed a significant enhancement of ductility (increased by 512 pct) and tensile strength (by 22 pct). The significant enhancement of properties is attributed to the suppression of pore formation and modification of eutectic Si phases due to the addition of Al2O3 nanoparticles. However, the yield strength of the T6 heat-treated nanocomposites was limited in enhancement due to a reaction between Mg and Al2O3 nanoparticles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. L. Hengcheng, S. Yu, and S. Guoxiong: Mater. Sci. Eng. A, 2003, vol. 358, pp. 164–70.10.1016/S0921-5093(03)00276-4 ↗
2. M.A. Gaffar, A. Gaber, M.S. Mostafa, and E.F. Abo Zeid: Mater. Sci. Eng. A, 2007, vol. 465, pp. 274–82.10.1016/j.msea.2007.02.023 ↗
3. J.E. Gruzieski and B.M. Closset: The Treatment of Liquid Aluminum-Silicon Alloys, American Society of Foundary, Des Plaines, IL, 1990, pp. 13–15.
4. G. Ran, J.E. Zhou, and Q.G. Wang: J. Mater. Process. Technol., 2008, vol. 207, pp. 46–52.10.1016/j.jmatprotec.2007.12.050 ↗
5. J. Man, L. Jing, and S.G. Jie: J. Alloys Compd., 2007, vol. 437, pp. 146–50.10.1016/j.jallcom.2006.07.113 ↗
6. M.A. Moustafa, F.H. Samuel, H.W. Dotty, and S. Valtierra: Int. J. Cast Met. Res., 2002, vol. 14, pp. 235–53.10.1080/13640461.2002.11819442 ↗
7. C.H. Caceres, M.B. Djurdjevic, T.J. Stockwell, and J.H. Sokolowski: Scripta Mater., 1999, vol. 40, pp. 631–37.10.1016/S1359-6462(98)00492-8 ↗
8. K. Akio, O. Atsushi, K. Toshiro, and T. Hiroyuki: J. Jpn. Inst. Light Met., 1999, vol. 49, pp. 149–54.10.2464/jilm.49.149 ↗
9. A. Mazahery, H. Abdizadeh, and H.R. Baharvandi: Mater. Sci. Eng. A, 2009, vol. 518, pp. 61–64.10.1016/j.msea.2009.04.014 ↗
10. Y. Yang, J. Lan, and X. Li: Mater. Sci. Eng. A, 2004, vol. 380, pp. 378–83.10.1016/j.msea.2004.03.073 ↗
11. G. Cao, H. Konishi, and X. Li: Mater. Sci. Eng. A, 2008, vol. 486, pp. 357–62.10.1016/j.msea.2007.09.054 ↗
12. H. Choi, N. Alba-Baena, S. Nimityongskul, M. Jones, T. Wood, M. Sahoo, R. Lakes, S. Kou, and X. Li: J. Mater. Sci., 2011, vol. 46, pp. 2991–97.10.1007/s10853-010-5176-y ↗
13. K.S. Suslick and G.J. Price: Annu. Rev. Mater. Sci., 1999, vol. 29, pp. 295–326.10.1146/annurev.matsci.29.1.295 ↗
14. D.Y. Ying and D.L. Zhang: Mater. Sci. Eng. A, 2000, vol. 286, pp. 152–56.10.1016/S0921-5093(00)00627-4 ↗
15. M. Kok: J. Mater. Process. Technol., 2005, vol. 161, pp. 381–87.10.1016/j.jmatprotec.2004.07.068 ↗
16. M.P. De Cicco, L. Turng, X. Li, and J.H. Perepezko: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2323–30.10.1007/s11661-011-0607-1 ↗
17. G.A. Edwards, G.K. Sigworth, C.H. Caceres, D. StJohn, and J. Barressi: AFS Trans., 1997, vol. 105, pp. 809–18.
18. S. Ikeno, K. Matsuda, K. Nakajima, S. Rengakuji, and Y. Uetani: J. Jpn. Inst. Light Met., 1998, vol. 48, pp. 207–11.10.2464/jilm.48.207 ↗
19. K. Matsuda, S. Ikeno, Y. Uetani, and T. Sato: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1293–99.10.1007/s11661-001-0219-2 ↗
20. W.F. Li, X.L. Ma, W.S. Zhang, W. Zhang, Y. Li, and Z.D. Zhang: Phys. Status Solidi A, 2006, vol. 203, pp. 294–99.10.1002/pssa.200521409 ↗
21. D. Roundy, C.R. Krenn, M.L. Cohen, and J.W. Morris, Jr.: Phys. Rev. Lett., 1999, vol. 82, pp. 2713–16.10.1103/PhysRevLett.82.2713 ↗
22. S. Wu and H. Nakae: J. Mater. Sci. Lett., 1999, vol. 18, pp. 321–23.10.1023/A:1006643609938 ↗
23. S. Hisashi, K. Motohiro, and I. Goroh: J. Jpn. Inst. Light Met., 1980, vol. 30, pp. 609–16.10.2464/jilm.30.609 ↗
24. C.D. Lee: Mater. Sci. Eng. A, 2008, vol. 488, pp. 296–302.10.1016/j.msea.2007.11.014 ↗
25. A. Daoud and W. Reif: J. Mater. Process. Technol., 2002, vol. 123, pp. 313–18.10.1016/S0924-0136(02)00103-6 ↗