S–N Fatigue and Fatigue Crack Propagation Behaviors of X80 Steel at Room and Low Temperatures
Source abstract
Abstract
In the present study, the S–N fatigue and the fatigue crack propagation (FCP) behaviors of American Petroleum Institute X80 steel were examined in the different locations of the base metal (BM), weld metal (WM), and heat-affected zone (HAZ) at 298 K, 223 K, and 193 K (25 °C, −50 °C, and −80 °C). The resistance to S–N fatigue of X80 BM specimen increased greatly with decreasing temperature from 298 K to 193 K (25 °C to −80 °C) and showed a strong dependency on the flow strength (½(yield strength + tensile strength)). The FCP rates of X80 BM specimen were substantially reduced with decreasing temperature from 298 K to 223 K (25 °C to −50 °C) over the entire ∆K regime, while further reduction in FCP rates was not significant with temperature from 223 K to 193 K (−50 °C to −80 °C). The FCP rates of the X80 BM and the WM specimens were comparable with each other, while the HAZ specimen showed slightly better FCP resistance than the BM and the WM specimens over the entire ∆K regime at 298 K (25 °C). Despite the varying microstructural characteristics of each weld location, the residual stress appeared to be a controlling factor to determine the FCP behavior. The FCP behaviors of high strength X80 steel were discussed based on the microstructural and the fractographic observations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. J. Billingham, J.V. Sharp, J. Spurrier, and P.J. Kilgallon: HSE Books, Research Report 105, 2003.10.1002/vnl.10070 ↗
2. NORSOK Standard M-001, Rev. 3, 2002.
3. API RP 2RD: Recommended Practice for Design of Risers for Floating Production System and TLPs, June 1998, 1st ed., API RP 2RD, Reaffirmed 2006.
4. D.P. Baxter, S.J. Maddox, and R.J. Pargeter: 26 th Int. Conf. Offshore Mech. Arct. Eng.,OMAE2007-29360, 2007, pp. 10–15.
5. M.A. N. Beltrao, E.M. Castrodeza and F.L. Bastian: Fatigue Fract. Engng. Mater. Struct., 2010, vol. 34, pp. 321-8.10.1111/j.1460-2695.2010.01521.x ↗
6. L.W. Tsay, T.S. Chern, C.Y. Gau and J.R. Yang: Int. J. Fatigue, 1999, vol. 21, pp. 857-64.10.1016/S0142-1123(99)00021-3 ↗
7. T.N. Nguyen and M.A. Wahab: J. Mater. Process. Technol., 1998, vol. 77, pp. 201–08.10.1016/S0924-0136(97)00418-4 ↗
8. X. Cheng, J.W. Fisher, H.J. Prask, T. Gnäupel-Herold, B.T. Yen and S. Roy: Int. J. Fatigue, 2003, vol. 25, pp. 1259-69.10.1016/j.ijfatigue.2003.08.020 ↗
9. D.H. Jeong, S.G. Lee, W.K. Jang, J.K. Choi, Y.J. Kim, and S.S. Kim: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4601–12.10.1007/s11661-013-1809-5 ↗
10. L. Baotong and Z. Xiulin: Mater. Sci. & Eng., 1991, vol. A148, pp. 179-88.10.1016/0921-5093(91)90820-D ↗
11. K.A. Esaklul, W. Yu, and W.W. Gerverich: in ASTM STP 857, R.I. Stephens, ed., ASTM, Philadelphia, 1985, pp. 63–83.
12. W. Wang, Y. Shan and K. Yang: Mater. Sci. Eng. A, 2009, vol. 502, pp. 38-44.10.1016/j.msea.2008.10.042 ↗
13. S.Y. Shin, S.M. Hong, J.H. Bae, K.S. Kim and S.H. Lee: J. Kor. Inst. Met. & Mater., 2009, vol. 47-3, pp. 155-68.
14. Z. Mei and J.W. Morris, Jr.: Metall. Trans. A, 1990, vol. 21A, pp. 3137-52.10.1007/BF02647310 ↗
15. P.K. Liaw and W.A. Logsdon: Eng. Fract. Mech., 1985, vol. 22, pp. 585-94.10.1016/0013-7944(85)90122-5 ↗
16. W.Yu, K. Esaklul and W.W.Gerberich: Metall. Trans. A, 1984, vol. 15A, pp. 889-900.10.1007/BF02644563 ↗
17. ASTM Standard E466: Standard Practice for Conduction Force Controlled Constant Amplitude Axial Fatigue Test of Metallic Materials, vol. 03.01, Annual Book of ASTM Standards, West Conshohocken, 2002.
18. ASTM Standard E647: Standard Test Method for Measurement of Fatigue Crack Growth Rates, vol. 03.01, Annual book of ASTM standards, West Conshohocken, 2002.
19. G.T. Gray III, A.W. Thompson and J.C. Williams: Metall. Trans. A, 1985, vol. 16A, pp. 753-60.10.1007/BF02814826 ↗
20. Y.J. Kim, J.K. Kwon, H.J. Lee, W.K. Jang, J.K. Choi and S.S. Kim: Metall. Mater. Trans. A., 2011, vol. 42A, pp. 986-99.10.1007/s11661-010-0577-8 ↗
21. M.S. Joo, D.W. Suh, J.H. Bae and H.K.D.H. Bhadeshia: Mater. Sci. & Eng., 2012, vol. A546, pp. 314-22.10.1016/j.msea.2012.03.079 ↗
22. L.W. Tsay, Y.C. Chen and S.L.I. Chan: Int. J. Fatigue, 2001, vol. 23, pp. 103-13.10.1016/S0142-1123(00)00081-5 ↗
23. Y. Jiang and M. Chen: Energy Procedia, 2012, vol. 14, pp. 524-28.10.1016/j.egypro.2011.12.969 ↗
24. J.T.P. Castro, M.A. Meggiolaro, and A.C.O. Miranda: in Solid Mechanics in Brazil, M. Alves and H.S. Da Costa Mattos, eds., ABCM, Sao Paulo, 2007, pp. 133–46.
25. N. Nanninga, A. Slifka, Y. Levy and C. White: J. Res. Natl. Inst. Stand. Technol., 2010, vol. 115, pp. 437-52.10.6028/jres.115.030 ↗
26. L. Briottet, R. Batisse, G. de Dinechin, P. Langlois and L. Thiers: Int. J. Hydrogen Energy, 2012, vol. 37, pp. 9423-30.10.1016/j.ijhydene.2012.02.009 ↗
27. K. Xu: ASTM G1.06 Hydrogen Embrittlement Workshop, Dallas, Nov 8 2005.
28. R.O. Ritchie: Int. Met. Rev., 1979, vol. 20, pp. 205-30.10.1179/095066079790136381 ↗
29. E.A. Starke, Jr. and J.C. Williams: 20th Symposium, ASTM STP 1020, ASTM, Philadelphia, 1989, pp. 184–205.
30. S.S. Kim, J.K. Kwon, Y.J. Kim, W.K. Jang, S.G. Lee and J.K. Choi: Met. & Mater. Int., 2013, vol. 19-4, pp. 683-90.10.1007/s12540-013-4007-5 ↗
31. L. Lawson, E.Y. Chen and M. Meshii: Int. J. Fatigue, 1999, vol. 21, pp. S15-S34.10.1016/S0142-1123(99)00053-5 ↗
32. R.L. Tobler and Y.W. Cheng: ASTM STP 857, 1985, pp. 3-30.
33. C.H. Wang and Y. Chang: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3162-9.10.1007/BF02663866 ↗
34. FITNET Final Technical Report, Annex C, 2006.
35. J.L. Robinson and C.J. Beevers: Metall. Science. J., 1973, vol. 7, pp. 153-159.10.1179/030634573790445550 ↗