journal article·2006-12

Time-temperature-precipitation characteristics of high-nitrogen austenitic Fe−18Cr−18Mn−2Mo−0.9N steel

Tae-Ho Lee, Sung-Joon Kim, Setsuo Takaki

Publisher page

Abstract

The time-temperature-precipitation (TTP) and corresponding mechanical properties in high-nitrogen austenitic Fe−18Cr−18Mn−2Mo−0.9N steel (all in weight percent) were investigated using electron microscopy and ambient tensile testing. The precipitation reactions can be categorized into three stages: (1) high-temperature region (above 950°C)—mainly coarse grain-boundary (intergranular) Cr2N; (2) nose-temperature region—integranular Cr2N→cellular Cr2N→intragranular Cr2N+ sigma (σ); and (3) low-temperature region (below 750°C)—intergranular Cr2N→cellular Cr2N→ intragranular Cr2N+σ+chi(χ)+M7C3 carbide. After cellular Cr2N precipitation became dominant above 800°C, yield and tensile strength gradually decreased, whereas elongation abruptly deteriorated with aging time. On the contrary, prolonged aging in the low-temperature regime increased tensile strength, caused by the precipitation of fine χ and M7C3 within grains. Based on the analyses of selected area diffraction (SAD) patterns, the crystallographic features of the second phases were analyzed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. M.O. Speidel: HNS88, Lille, France, May 1988. The Institute of Metals, London, 1989, pp. 92–96.
2. J.W. Simmons: Mater. Sci. Eng., A, 1996, vol. 207, pp. 159–69.10.1016/0921-5093(95)09991-3 ↗
3. V.G. Gavriljuk and H. Berns: High Nitrogen Steels, Springer-Verlag, Berlin, 1999, pp. 135–98.10.1007/978-3-662-03760-7_3 ↗
4. H. Hännien, J. Romu, R. Ilola, J. Tervo, and A. Laitinen: J. Mater. Sci. Technol., 2001, vol. 117, pp. 424–30.10.1016/S0924-0136(01)00804-4 ↗
5. B. Weiss and R. Stickler: Metall. Trans. A, 1972, vol. 3, pp. 851–56.10.1007/BF02647659 ↗
6. D. Peckner and I.M. Bernstein: Handbook of Stainless Steel, McGraw-Hill Inc., New York, NY, 1987, pp. 4–35.
7. T. Sourmail: Mater. Sci. Technol., 2001, vol. 17, pp. 1–14.10.1179/026708301101508972 ↗
8. T.H. Lee and S.J. Kim: Scripta Mater., 1998, vol. 39, pp. 951–56.10.1016/S1359-6462(98)00269-3 ↗
9. T.H. Lee, S.J. Kim, and Y.C. Jung: Metall. Mater. Trans. A, 2000, vol. 31, pp. 1713–23.10.1007/s11661-998-0332-6 ↗
10. T.H. Lee, C.S. Oh, H.N. Han, C.G. Lee, S.J. Kim, and S. Takaki: Acta Crystallogr., Sect. B, 2005, vol. 61, pp. 137–44.10.1107/S0108768104033919 ↗
11. T.H. Lee, S.J. Kim, and S. Takaki: Acta Crystallogr., Sect. B, 2006 vol. 62, in press.10.1107/S0108767306098989 ↗
12. T.H. Lee, S.J. Kim, and S. Takaki: Acta Crystallogr., Sect. B, 2006, vol. 62, in press.10.1107/S0108767306098989 ↗
13. J.P. Morniroli, E. Bauer-Grosse, and M. Gantois: Philos. Mag. A, 1983, vol. 48, pp. 311–27.10.1080/01418618308234895 ↗
14. J.P. Morniroli and M. Gantois: J. Appl. Crystallogr., 1983, vol. 16, pp. 1–10.10.1107/S0021889883009863 ↗
15. T.H. Lee, C.S. Oh, C.G. Lee, S.J. Kim, and S. Takaki: Scripta Mater., 2004, vol. 50, pp. 1325–28.10.1016/j.scriptamat.2004.02.013 ↗
16. A. Their, A. Bäumel, and E. Schmidtmann: Arch. Eisenhüttenwes., 1969, vol. 40, pp. 333–39.10.1002/srin.196904324 ↗
17. V.G. Gavriljuk and H. Berns: High Nitrogen Steels, Springer-Verlag, Berlin, 1999, pp. 102–19.10.1007/978-3-662-03760-7 ↗
18. F. Vanderschaeve, R. Taillard, and J. Foct: J. Mater. Sci., 1995, vol. 30, pp. 6035–45.10.1007/BF01151525 ↗
19. M. Kikuchi, M. Kajihara, and S.K. Choi: Mater. Sci. Eng., A, 1991, vol. 146, pp. 131–50.10.1016/0921-5093(91)90273-P ↗
20. T.H. Lee, C.S. Oh, C.G. Lee, S.J. Kim, and S. Takaki: Met. Mater. Int., 2004, vol. 7, pp. 231–36.
21. J.W. Simmons: Metall. Mater. Trans. A, 1995, vol. 26, pp. 2579–96.10.1007/BF02670680 ↗
22. A. Toro, W.Z. Misiolek, and A.P. Tschiptschin: Acta Mater., 2003, vol. 51, pp. 3363–74.10.1016/S1359-6454(03)00107-1 ↗
23. R.D. Knutsen, C.I. Lang, and J.A. Basson: Acta Mater., 2004, vol. 52, pp. 2407–17.10.1016/j.actamat.2004.01.031 ↗
24. T.H. Lee, Y.C. Jung, and S.J. Kim: J. Kor. Inst. Met. Mater., 1999, vol. 37, pp. 1170–77.
25. J.S. Kasper: Acta Metall., 1954, vol. 2, pp. 456–61.10.1016/0001-6160(54)90066-8 ↗
26. D.J. Dyson and K.W. Andrews: J. Iron Steel Inst., 1969, vol. 207, pp. 208–19.
27. W. Dudzinski, J.P. Morniroli, and M. Gantois: J. Mater. Sci., 1980, vol. 15, pp. 1387–401.10.1007/BF00752118 ↗
28. P. Vallas and L.D. Calvert: Pearson’st Handbook of Crystallographic Data for Intermediate Phases, ASM Metals Park, OH, 1985, p. 1873.
29. R. Fruchart and A. Rouault: Anal. Chim. (Rome), 1969, vol. 4, pp. 143–45.
30. A. Westgren: Jernkont. Ann., 1935, vol. 119, pp. 231–40.
31. A.A. Kaya: Mater. Characterization, 2002, vol. 49, pp. 23–34.10.1016/S1044-5803(02)00284-X ↗
32. F. Ernst, Y. Cao, and G.M. Michal: Acta Mater., 2004, vol. 52, pp. 1469–77.10.1016/j.actamat.2003.11.027 ↗
33. L.C. Lim, M.O. Lai, J. Ma, D.O. Northwood, and B. Miao: Mater. Sci. Eng., A, 1993, vol. 171, pp. 13–19.10.1016/0921-5093(93)90388-U ↗
34. D.V. Shtansky, K. Nakai, and Y. Ohmori: Acta Mater., 1999, vol. 47, pp. 1105–15.10.1016/S1359-6454(99)00011-7 ↗
35. D.N. Shackleton and P.M. Kelly: Acta Metall., 1967, vol. 15, pp. 979–92.10.1016/0001-6160(67)90263-5 ↗
36. X. Huang and N.H. Pryds: Acta Mater., 2000, vol. 48, pp. 4073–82.10.1016/S1359-6454(00)00205-6 ↗
37. L.E. Miller and G.C. Smith: J. Iron Steel Inst., 1970, vol. 208, pp. 998–1005.
38. A.R. Rosenfield, G.T. Hahn, and J.D. Embury: Metall. Trans. 1972, vol. 3, pp. 2797–804.10.1007/BF02652845 ↗