On the oxidation of the third-generation single-crystal superalloy CMSX-10
Source abstract
Abstract
The oxidation behavior of the third-generation nickel-base single-crystal superalloy CMSX-10 is examined. Since the in-service performance of the alloy is of the greatest practical significance, a detailed study is made of the microstructural degradation of a turbine blade that had been removed prematurely from a commercial gas turbine engine. The results are augmented with isothermal oxidation tests conducted in the laboratory for 100 hours, at temperatures of 800 °C, 900 °C, and 1000 °C. Scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) analysis, microhardness testing, and X-ray diffraction (XRD) were employed. It was found that the oxidation of CMSX-10 at temperatures below 1000 °C does not produce either Al2O3 or the spinel Ni(Cr,Al)2O4, both of which are found in the internal oxidation zone of the earlier generations of superalloys. Surprisingly, it is demonstrated conclusively that the oxidation of CMSX-10 generates the β phase (NiAl). This reaction, which to the authors’ knowledge has not yet been reported, is termed self-aluminization. The XRD studies demonstrate that the internal oxidation of CMSX-10 produces (Ni,Co)Ta2O6, (Ni,Co)WO4, CrTaO4, and Cr(W,Mo)O4. There is indication that the formation of the δ phase (Ni2Al3) slows the oxidation rate at 1000 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. M. Göbel, A. Rahmel, and M. Schütze: Oxid. Met., 1993, vol. 39, pp. 231–61.10.1007/BF00665614 ↗
2. M. Göbel, A. Rahmel, and M. Schütze: Oxid. Met., 1994, vol. 41, pp. 271–300.10.1007/BF01080784 ↗
3. R. Janakiraman, G.H. Meier, and F.S. Pettit: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2905–13.10.1007/s11661-999-0128-3 ↗
4. V.K. Tolpygo, D.R. Clarke, and K.S. Murphy: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1467–78.10.1007/s11661-001-0235-2 ↗
5. J. Angenete, K. Stiller, and V. Langer: Oxid. Met., 2003, vol. 60, pp. 47–82.10.1023/A:1024665229656 ↗
6. J. Angenete and K. Stiller: Oxid. Met., 2003, vol. 60, pp. 83–101.10.1023/A:1024617313726 ↗
7. M.S. Hook: Ph.D. Thesis, University of Cambridge, Cambridge, United Kingdom, 2004.
8. U. Krupp and H.J. Christ: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 47–56.10.1007/s11661-000-0051-0 ↗
9. M.C. Maris-Sida, G.H. Meier, and F.S. Petit: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2609–19.10.1007/s11661-003-0020-5 ↗
10. M.H. Li, X.F. Sun, T. Jin, H.R. Guan, and Z.Q. Hu: Oxid. Met., 2003, vol. 59, pp. 591–605.10.1023/A:1023604214245 ↗
11. M.H. Li, X.F. Sun, T. Jin, H.R. Guan, and Z.Q. Hu: Oxid. Met., 2003, vol. 60, pp. 195–210.10.1023/A:1024629716452 ↗
12. F.H. Yuan, E.H. Han, C.Y. Jo, T.F. Li, and Z.Q. Hu: Oxid. Met., 2003, vol. 60, pp. 211–24.10.1023/A:1026077417712 ↗
13. G.E. Fuchs: Mater. Sci. Eng. A, 2001, vol. 300, pp. 52–60.10.1016/S0921-5093(00)01776-7 ↗
14. M.A. Smith, W.E. Frazier, and B.A. Pregger: Mater. Sci. Eng., 1995, vol. A203, pp. 388–98.10.1016/0921-5093(95)09819-4 ↗
15. M. Moniruzzaman, M. Maeda, Y. Murata, and M. Morinaga: Iron Steel Inst. Jpn. Int., 2003, vol. 43, pp. 386–93.10.2355/isijinternational.43.386 ↗
16. S. Ochiai, Y. Oya, and T. Suzuki: Bull. P.M.E. (Tokyo Inst. Technol.), 1983, vol. 52, pp. 1–17.
17. S. Ochaiz, Y. Mishima, and T. Suzuki: Bull. P.M.E. (Tokyo Inst. Technol.), 1984, vol. 53, pp. 15–28.
18. Pierre Caron: ONERA, CHATI-LON CEDEX, France, 2003 personal communication.
19. C.S. Giggins and F.S. Pettit: J. Electrochem. Soc., 1971, vol. 118, pp. 1782–90.10.1149/1.2407837 ↗
20. A. Ul-Hamid: Oxid. Met., 2002, vol. 58, pp. 41–56.10.1023/A:1016060423612 ↗
21. D.K. Das, V. Singh, and S.V. Joshi: Mater. Sci. Technol., 2003, vol. 19, pp. 695–708.10.1179/026708303225001975 ↗
22. M.J. Stiger, N.M. Yanar, M.G. Topping, F.S. Pettit, and G.H. Meier: Z. Metallkd., 1999, vol. 90, pp. 1069–78.
23. E.A.G. Shillington and D.R. Clarke: Acta Mater., 1999, vol. 47, pp. 1297–1305.10.1016/S1359-6454(98)00407-8 ↗
24. P. Nash, and M.F. Singleton, and J.I. Murray: in Phase Diagrams of Binary Nickel Alloys, P. Nash, ed., ASM INTERNATIONAL, Materials Park, OH, 1991, p. 3.
25. O. Kubaschewski and B.E. Hopkins: Oxidation of Metals and Alloys, 2nd ed., Butterworths, London, 1962, pp. 8–33.
26. B. Jönson: Scand. J. Metall., 1995, vol. 24, pp. 21–27.
27. S.B. Jung, T. Yamane, Y. Minamino, K. Hirao, H. Araki, and S. Saji: J. Mater. Sci. Lett., 1992, vol. 11, pp. 1333–37.10.1007/BF00729354 ↗
28. R.A. Swalin and A. Martin: Trans. AIME, 1956, vol. 206, pp. 567–72.
29. N. Komai, M. Watanabe, Z. Horita, T. Sano, and M. Nemoto: Acta Mater., 1998, vol. 46, pp. 4443–51.10.1016/S1359-6454(98)00081-0 ↗
30. A. Davin, V. Leroy, D. Coutsouradis, and L. Habraken: Cobalt, 1963, vol. 19, pp. 51–56.
31. D. Bergner: Krist. Technol., 1972, vol. 7, p. 651.10.1002/crat.19720070605 ↗
32. M.S.A. Karunaratne, P. Carter, and R.C. Reed: Mater. Sci. Eng. A, 2000, vol. 281, pp. 229–33.10.1016/S0921-5093(99)00705-4 ↗
33. K. Hoshino, S.J. Rothman, and K.S. Averback: Acta Metall., 1988, vol. 36, pp. 1271–79.10.1016/0001-6160(88)90279-9 ↗
34. Y. Minamino, S.B. Jung, T. Yamane, and K. Hirao: Metall. Trans. A, 1992, vol. 23A, pp. 2783–90.10.1007/BF02651757 ↗
35. J. Cermac and V. Rothova: Acta Mater., 2003, vol. 51, pp. 4411–21.10.1016/S1359-6454(03)00276-3 ↗
36. S. Kim and Y.A. Chang: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1519–24.10.1007/s11661-000-0162-7 ↗
37. O. Kubaschewski, E.L. Evans, and C.B. Alcock: Metallurgical Thermochemistry, Pergaman Press, Oxford, United Kindom, 1967, pp. 210–15.
38. W. Huang and Y.A. Chang: Intermetallics, 1998, vol. 6, pp. 487–98.10.1016/S0966-9795(97)00099-X ↗
39. A.M. Venezia, J.E. Baker, and C.M. Loxton: Proc. 7th Int. Conf. SIMS 7, 1990, pp. 719–22.
40. L.S. Castleman and L.L. Seigle: Trans. TMS-AIME, 1958, vol. 212, pp. 589–96.
41. M.M.P. Janssen and A.D. Rieck: Trans. TMS-AIME, 1967, vol. 239, pp. 1372–85.
42. A.J. Hickl and R.W. Heckel: Metall. Trans. A, 1975, vol. 6A, pp. 431–40.10.1007/BF02658400 ↗
43. A.K. Sarkhel and L.L. Seigle: Metall. Trans. A, 1982, vol. 13A, pp. 1313–14.10.1007/BF02645515 ↗
44. M.J. Weimer, B.A. Nagraj, J.C. Schaeffer, and J.A. Heaney III: European Patent 1,295,960 A2, March 26, 2003.