journal article·2013-06

Plastic Flow and Microstructure Evolution during Thermomechanical Processing of a PM Nickel-Base Superalloy

S. L. Semiatin, K. E. McClary, A. D. Rollett, C. G. Roberts, E. J. Payton, F. Zhang, T. P. Gabb

Publisher page

Abstract

Plastic flow and microstructure evolution during sub- and supersolvus forging and subsequent supersolvus heat treatment of the powder-metallurgy superalloy LSHR (low-solvus, high-refractory) were investigated to develop an understanding of methods that can be used to obtain a moderately coarse gamma grain size under well-controlled conditions. To this end, isothermal, hot compression tests were conducted over broad ranges of temperature [(1144 K to 1450 K) 871 °C to 1177 °C] and constant true strain rate (0.0005 to 10 s−1). At low temperatures, deformation was generally characterized by flow softening and dynamic recrystallization that led to a decrease in grain size. At high subsolvus temperatures and low strain rates, steady-state flow or flow hardening was observed. These latter behaviors were ascribed to superplastic deformation and microstructure evolution characterized by a constant grain size or concomitant dynamic grain growth, respectively. During supersolvus heat treatment following subsolvus deformation, increases in grain size whose magnitude was a function of the prior deformation conditions were noted. A transition in flow behavior from superplastic to nonsuperplastic and the development during forging at a high subsolvus temperature of a wide (possibly bi- or multimodal) gamma-grain-size distribution having some large grains led to a substantially coarser grain size during supersolvus annealing in comparison to that produced under all other forging conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Advanced materials and composites · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. M.J. Donachie, Jr., ed., Superalloys Source Book, ASM International, Materials park, OH, 1984.
2. J. Gayda, T.P. Gabb, and P.T. Kantzos: US Patent 6,660,110, December 2003.
3. S.L. Semiatin and D.R. Barker: US Patent 5,447,580, September 1995.
4. G.F. Mathey: US Patent 5,312,497, May 1994.
5. S. Ganesh and R.G. Tolbert: US Patent 5,527,020, June 1996.
6. J. Lemsky: Unpublished research, Ladish Co., Cudahy, WI, 2006.
7. J-P.A. Immarigeon and P.H. Floyd: Metall. Trans. A, 1981, vol. 12A, pp. 1177- 1186.10.1007/BF02642331 ↗
8. Y. Combres and C. Levaillant: Inter. J. Plasticity, 1990, vol. 6, pp. 505-519.10.1016/0749-6419(90)90042-D ↗
9. A.K. Koul and J-P.A. Immarigeon: Acta Metall., 1987, vol. 35, pp. 1791-1805.10.1016/0001-6160(87)90125-8 ↗
10. M.O. Alniak and F. Bedir: Mater. Sci. Eng. A, 2006, vol. A429, pp. 295-303.10.1016/j.msea.2006.05.030 ↗
11. M.O. Alniak and F. Bedir: Mater. Sci. Eng. B, 2006, vol. B130, pp. 254-263.10.1016/j.mseb.2006.03.011 ↗
12. W. Tu and T.M. Pollock: Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, and S. A. Woodard, eds., TMS, Warrendale, PA, 2008, pp. 395–403.10.7449/2008/Superalloys_2008_395_403 ↗
13. W.J Tu: PhD Dissertation, University of Michigan, Ann Arbor, MI, 2010.
14. W.J. Tu and T.M. Pollock: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2002-2009.10.1007/s11661-010-0251-1 ↗
15. J.W. Martin, R.D. Doherty, and B. Cantor: Stability of Microstructure in Metallic Systems, Cambridge University Press, Cambridge, UK, 1997.10.1017/CBO9780511623134 ↗
16. M. Soucail, M. Marty, and H. Ocor: Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, PA, 1996, pp. 663–666.10.7449/1996/Superalloys_1996_663_666 ↗
17. E. Huron, S. Shrivatsa, and E. Raymond: Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson, and J.J. Schirra, eds., TMS, Warrendale, PA, 2000, pp. 49–58.10.7449/2000/Superalloys_2000_49_58 ↗
18. E.J. Payton: PhD Dissertation, The Ohio State University, Columbus, OH, 2009.
19. P.R. Rios: Acta Mater., 1997, vol. 45, pp. 1785-1789.10.1016/S1359-6454(96)00284-4 ↗
20. K. Song and M. Aindow: Proc. Materials Science and Technology (MS&T) 2006: Fundamentals and Characterization, Vol. 2, Z-K. Lu, C.E. Campbell, L.Q. Chen, E.B. Damm, J.E. Morral, and J.L. Murray, eds., TMS, Warrendale, PA, 2006, pp. 211–20.
21. G. Wang, D.S. Xu, E.J. Payton, N. Ma, R. Yang, M.J. Mills, and Y. Wang: Acta Mater., 2011, vol. 59, pp. 4587-4594.10.1016/j.actamat.2011.04.004 ↗
22. T.P. Gabb, J. Gayda, and J. Falsey: Report NASA/TM-2005-213649, National Aeronautics and Space Administration, Glenn Research Center, Cleveland, OH, June 2005. (Available electronically at http://gltrs.grc.nasa.gov).
23. D.D. Krueger, R.D. Kissinger, R.G. Menzies, and C.S. Wukusick: US Patent 4,957,567, September 1990.
24. E.L. Raymond, R.D. Kissinger, A.J. Paxson, and E.S. Huron: US Patent 5,584,947, December 1996.
25. E.S. Huron, J.A. Heaney, D.P. Mourer, J.R. Groh, E.L. Raymond, D.A. Utah, M.J. Weimer, and K.R. Bain: US Patent Application 11/770,257, January 2009.
26. D.P. Mourer and K.R. Bain: US Patent Application 12/494,896, December 2010.
27. S.L. Semiatin, K. E. McClary, A.D. Rollett, C.G. Roberts, E.J. Payton, F. Zhang, and T.P. Gabb: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1649-1661.10.1007/s11661-011-1035-y ↗
28. J. Gayda, T.P. Gabb, and P.T. Kantzos: Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 323–30.10.7449/2004/Superalloys_2004_323_329 ↗
29. J. Lemsky: Report NASA/CR-2005-213574, Ladish Company, Inc., Cudahy, WI, February 2005. (Available electronically at http://gltrs.grc.nasa.gov).
30. S.I. Oh, S.L. Semiatin, and J.J. Jonas: Metall. Trans. A, 1992, vol. 23A, pp. 963-975.10.1007/BF02675571 ↗
31. A.A. Salem, M.G. Glavicic, and S.L. Semiatin: Mater. Sci. Eng. A, 2008, vol. A494, pp. 350-359.10.1016/j.msea.2008.06.022 ↗
32. E.J. Payton, P.J. Phillips, and M.J. Mills: Mater. Sci. Eng. A, 2010, vol. A527, pp. 2684-2692.10.1016/j.msea.2009.12.037 ↗
33. J.K. Mackenzie: Biometrika, 1958, vol. 45, pp. 229-240.10.1093/biomet/45.1-2.229 ↗
34. J. Dennis, P.S. Bate, and F.J. Humphreys: Acta Mater., 2009, vol. 57, pp. 4539-4547.10.1016/j.actamat.2009.06.018 ↗