journal article·2004-07

The three-dimensional X-ray crystal microscope: A new tool for materials characterization

Wenjun Liu, Gene E. Ice, Bennett C. Larson, Wenge Yang, Jonathan Z. Tischler, J. D. Budai

Publisher page

Abstract

The three-dimensional (3-D) X-ray crystal microscope is a new nondestructive tool for the 3-D characterization of the mesoscopic and nanoscopic materials structure. A prototype microscope is installed on beamline 34-ID at the advanced photon source and has begun initial operation. The prototype microscope has a routine spatial resolution of approximately 0.5 × 0.5 × 1 µm3 and can probe tens to hundreds of microns below a sample surface, depending on the composition of the sample. For each volume element measured, the microscope can determine between 10 and 16 parameters. The measured parameters are the local crystallographic phase (1 deg of freedom), the Eulerian angles of crystal orientation (3 deg of freedom), and the plastic and/or elastic strain-tensor elements (6 to 12 deg of freedom). The time required to collect each volume element varies between 1 and 14 seconds, depending on the precision of the parameters and the sample complexity. Much faster data acquisition and much better spatial resolution are certain in the near future. Some initial results are presented to illustrate how the 3-D X-ray crystal microscope can provide unprecedented information about the 3-D structure of materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced X-ray Imaging Techniques · Advanced Surface Polishing Techniques · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. J.S. Chung and G.E. Ice: J. Appl. Phys., 1999, vol. 86, pp. 5249–56.10.1063/1.371507 ↗
2. B.C. Larson, Wenge Yang, G.E. Ice, J.D. Budai, and J.Z. Tischler: Nature, 2002, vol. 415, pp. 887–90.10.1038/415887a ↗
3. G.E. Ice and B.C. Larson: Adv. Eng. Mater., 2000, vol. 2, pp. 643–46.10.1002/1527-2648(200010)2:10<643::AID-ADEM643>3.0.CO;2-U ↗
4. G.E. Ice, J.S. Chung, W. Lowe, E. Williams, and J. Edelman: Rev. Sci. Instrum., 2000, vol. 71, pp. 2001–06.10.1063/1.1150568 ↗
5. G.E. Ice, J.S. Chung, J.Z. Tischler, A. Lunt, and L. Assoufid: Rev. Sci. Instrum., 2000, vol. 71, pp. 2635–39.10.1063/1.1150668 ↗
6. Y.-A. Soh, P.G. Evans, Z. Cai, B. Lai, C.-Y. Kim, G. Aeppli, N.D. Mathur, M.G. Blamire, and E.D. Isaacs: J. Appl. Phys., 2002, vol. 91, pp. 7742–44.10.1063/1.1455609 ↗
7. P.M. Mooney, J.L. Jordan-Sweet, I.C. Noyan, S.K. Kaldor, and P.C. Wang: Appl. Phys. Lett., 1999, vol. 74, pp. 726–28; P. Evans, E. Isaacs, G. Aeppli, Z. Cai, and B. Lai: Science, 2002, vol. 295, pp. 1042–45.10.1063/1.123104 ↗
8. H.F. Poulsen, S.F. Nielsen, E.M. Lauridsen, S. Schmidt, R.M. Suten, U. Lienert, L. Margulies, T. Lorentzen, and D.J. Jensen: J. Appl. Crystallogr., 2001, vol. 34, pp. 751–56.10.1107/S0021889801014273 ↗
9. N. Tamura, A.A. MacDowell, R. Spolenqak, B.C. Valek, J.C. Bravman, W.L. Brown, R.S. Celestre, H.A. Padmore, B.W. Batterman, and J.R. Patel: J. Sync. Rad., 2003, vol. 10, pp. 137–43.10.1107/S0909049502021362 ↗
10. B.C. Valek, J.C. Bravman, N. Tamura, A.A. MacDowell, R.S. Celestre, H.A. Padmore, R. Spolenak, W.L. Brown, B.W. Batterman, and J.R. Patel: Appl. Phys. Lett., 2002, vol. 81, pp. 4168–70.10.1063/1.1525880 ↗
11. T.Y. Lee, J. Choi, Y. Chung, J.Y. Huang, J.M. Lee, S.H. Nam, and H.S. Youn: Nucl. Instrum. Meth. A, 2001, vol. 467, pp. 47–50.10.1016/S0168-9002(01)00219-4 ↗
12. B.C. Larson, N. Tamura, J.S. Chung, G.E. Ice, J.D. Budai, J.Z. Tischler, W. Yang, H. Weiland, and W.P. Lowe: Mater. Res. Soc. Symp., 2000, vol. 500, pp. 247–52.
13. J.D. Budai, W. Yang, N. Tamura, J.-S. Chung, J.Z. Tischler, B.C. Larson, G.E. Ice, C. Park, and D.P. Norton: Nature Mater., 2003, vol. 2, pp. 487–92.10.1038/nmat916 ↗
14. G.E. Ice, F.J. Walker, B. Larson, J.-S. Chung, S.A. David, and E. Ohriner: Trends in Welding Research, Proc. 6th Int. Conf., S.A. David, T. DebRoy, J.C. Lippold, H.B. Smart, and J.M. Vitek, eds., ASM INTERNATIONAL, Materials Park, OH, 2002, pp. 873–77.
15. J. Pang: ORNL, Oak Ridge, TN, private communication, 2004.
16. R. Barabash, G.E. Ice, B.C. Larson, G.M. Pharr, K.-S. Chung, and W. Yang: Appl. Phys. Lett., 2001, vol. 79, p. 749.10.1063/1.1389321 ↗
17. R.I. Barabash, G.E. Ice, B.C. Larson, and W. Yang: in From Semiconductors to Protein, S.J.L. Billinge and M.F. Thorpe, eds., Kluwer Academic/Plenum Publishers, New York, NY, 2002.
18. W. Liu, G.E. Ice, B.C. Larson, and W. Yang: Nature Mater., 2004, submitted for publication.
19. O. Hignette, G. Rostaing, P. Cloetens, A. Rommeveaux, W. Ludwig, and A. Freund: Proc. SPIE, 2001, vol. 4499, pp. 105–16; A. Freund: ESRF, Grenoble, France, private communication, 2003.10.1117/12.450227 ↗
20. K. Yamauchi, K. Yamamura, H. Mimura, Y. Sano, A. Saito, A. Souvorov, M. Yabashi, K. Tamasaku, T. Ishikawa, and Y. Mori: J. Synch. Rad., 2002, vol. 9, pp. 313–16.10.1107/S0909049502012578 ↗
21. A. Khousary, G.E. Ice, and P. Eng: SPIE, 2002, vol. 4782, pp. 65–73.10.1117/12.455687 ↗