Selective Oxidation and Reactive Wetting during Galvanizing of a CMnAl TRIP-Assisted Steel
Source abstract
Abstract
A transformation induced plasticity (TRIP)-assisted steel with 0.2 pct C, 1.5 pct Mn, and 1.5 pct Al was successfully galvanized using a thermal cycle previously shown to produce an excellent combination of strength and ductility. The steel surface chemistry and oxide morphology were determined as a function of process atmosphere oxygen partial pressure. For the 220 K (–53 °C) dew point (dp) + 20 pct H2 atmosphere, the oxide morphology was a mixture of films and nodules. For the 243 K (–30 °C) dp + 5 pct H2 atmosphere, nodules of MnO were found primarily at grain boundaries. For the 278 K (+5 °C) dp + 5 pct H2 atmosphere, nodules of metallic Fe were found on the surface as a result of alloy element internal oxidation. The steel surface chemistry and oxide morphology were then related to the reactive wetting behavior during continuous hot dip galvanizing. Good wetting was obtained using the two lower oxygen partial pressure process atmospheres [220 K dp and 243 K dp (–53 °C dp and –30 °C dp)]. An increase in the number of bare spots was observed when using the higher oxygen partial pressure process atmosphere (+5 °C dp) due to the increased thickness of localized oxide films.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · High-Temperature Coating Behaviors · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. V.F. Zackay, E.R. Parker, D. Fahr, and R.A. Busch: ASM Trans. Q., 1967, vol. 60, pp. 252–59.
2. Y. Tomota, H. Tokuda, Y. Adachi, M. Wakita, A. Moriai, and Y. Morii: Acta Mater., 2004, vol. 52, pp. 5737–45.10.1016/j.actamat.2004.08.016 ↗
3. P. Jacques, Q. Furnémont, A. Mertens, and F. Delannay: Phil. Mag. A, 2001, vol. 81, pp. 1789–1812.10.1080/01418610108216637 ↗
4. M. Takahashi, H. Yoshida, and S. Hiwatashi: Int. Conf. on TRIP-Aided High Strength Ferrous Alloys, Ghent, Belgium, June 19–21, 2002, pp. 103–11.
5. B. Mintz: Int. Mater. Rev., 2001, vol. 46, pp. 169–97.10.1179/095066001771048754 ↗
6. J. Van Slycken, P. Verleysen, J. Degrieckm J. Bouquerel, and B.C. De Cooman: Mater. Sci. Eng. A, 2007, vols. 460–461, pp. 516–24.10.1016/j.msea.2007.01.075 ↗
7. B.C. De Cooman: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 285–303.10.1016/j.cossms.2004.10.002 ↗
8. P. Drillet, Z. Zermout, D. Bouleau, J. Mataigne, and S. Claessens: Proc. 6th Int. Conf. on Zinc Alloy Coated Steel Sheet, Chicago, IL, Apr. 4–7, 2004, Association for Iron and Steel Technology, Warrendale, PA, pp. 1123–34.
9. J. Mahieu, B.C. De Cooman, J. Maki, and S. Claessens: Iron Steelmaker, 2002, vol. 29, pp. 29–34.10.1179/030192302225005556 ↗
10. M.S. Kim, J.H. Kwak, J.S. Kim, Y.H. Liu, N. Gao, and N.-Y. Tang: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1903–10.10.1007/s11661-009-9880-7 ↗
11. J. Mahieu, S. Claessens, and B.C. De Cooman: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2905–08.10.1007/s11661-001-1042-5 ↗
12. P. Jacques, X. Cornet, P. Harlet, J. Ladrière, and F. Delannay: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2383–93.10.1007/s11661-998-0114-1 ↗
13. O. Matsumura, Y. Sakuma, and H. Takechi: Trans. ISIJ, 1987, vol. 27, pp. 570–79.10.2355/isijinternational1966.27.570 ↗
14. E. Girault, P. Jacques, P. Ratchev, J. Van Humbeeck, B. Verlinden, and E. Aernoud: Mater. Sci. Eng. A, 1999, vols. 273–275, pp. 471–74.10.1016/S0921-5093(99)00330-5 ↗
15. P.J. Jacques, E. Girault, P. Harlet, and F. Delannay: ISIJ Int., 2001, vol. 41, pp. 1061–67.10.2355/isijinternational.41.1061 ↗
16. P.J. Jacques, E. Girault, A. Mertens, B. Verlinden, J. Van Humbeeck, and F. Delannay: ISIJ Int., 2001, vol. 41, pp. 1068–74.10.2355/isijinternational.41.1068 ↗
17. E. Girault, A. Mertens, P. Jacques, Y. Houbaert, B. Verlinden, and J. Van Humbeeck: Scripta Mater., 2001, vol. 44, pp. 885–92.10.1016/S1359-6462(00)00697-7 ↗
18. A.K. Srivastava, D. Battacharjee, G. Jha, N. Gope, and S.B. Singh: Mater. Charact., 2006, vol. 57, pp. 127–35.10.1016/j.matchar.2006.01.010 ↗
19. A.K. Srivastava, D. Battacharjee, G. Jha, N. Gope, and S.B. Singh: Mater. Sci. Eng. A, 2007, vols. 445–446, pp. 549–57.10.1016/j.msea.2006.09.101 ↗
20. A.N. Vasilakos, J. Ohlert, K. Giasla, G.N. Haidemenopoulos, and W. Bleck: Steel Res., 2002, vol. 73, pp. 249–52.10.1002/srin.200200204 ↗
21. M. De Meyer, D. Vanderschueren, and B.C. De Cooman: ISIJ Int., 1999, vol. 39, pp. 813–22.10.2355/isijinternational.39.813 ↗
22. J. Mahieu, J. Maki, B.C. De Cooman, and S. Claessens: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2573–80.10.1007/s11661-002-0378-9 ↗
23. H.C. Chen, H. Era, and M. Shimizu: Metall. Trans. A, 1989, vol. 20A, pp. 437–45.10.1007/BF02653923 ↗
24. A. Pichler, S. Traint, G. Arnolder, P. Stiaszny, M. Blaimschein, and E.A. Werner: Iron Steelmaker, 2003, vol. 30, pp. 21–31.
25. E.M. Bellhouse and J.R. McDermid: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1460–73.10.1007/s11661-010-0185-7 ↗
26. Y. Bian, H.S. Zurob, and J.R. McDermid: MS&T 2008 Conf. Proc., Pittsburgh, PA, Oct. 5–9, 2008, TMS, Warrendale, PA, pp. 1427–38.
27. A. Mertens, P.J. Jacques, L. Zhao, S.O. Kruijver, J. Sietsma, and F. Delannay: J. Phys. IV JP, 2003, vol. 112, pp. 305–08.
28. N. Fonstein, N. Pottore, S.H. Lalam, and D. Bhattacharya: in Austenite Formation and Decomposition, E.B. Damm and M.J. Merwin, eds., TMS, Warrendale, PA, 2003, pp. 549–61.
29. K.S. Shin, S.H. Park, S.H. Jeon, D.C. Bae, and Y.M. Choi: Proc. Asia-Pacific Galvanizing Conf. 2009, Jeju, Korea, Nov. 8–12, 2009, The Corrosion Science Society of Korea, Seoul, paper no. A-55.
30. Y. Suzuki, T. Yamashita, Y. Sugimoto, S. Fujita, and S. Yamacuchi: ISIJ Int., 2009, vol. 49, pp. 564–73.10.2355/isijinternational.49.564 ↗
31. E.M. Bellhouse, A.I.M. Mertens, and J.R. McDermid: Mater. Sci. Eng. A, 2007, vol. 463, pp. 147–56.10.1016/j.msea.2006.09.117 ↗
32. E.M. Bellhouse and J.R. McDermid: Mater. Sci. Eng. A, 2008, vol. 491, pp. 39–46.10.1016/j.msea.2007.12.033 ↗
33. J. Mahieu, S. Classens, B.C. De Cooman, and F. Goodwin: Proc. 6th Int. Conf. on Zinc Alloy Coated Steel Sheet, Chicago, IL, April 4–7, 2004, Association for Iron and Steel Technology, Warrendale, PA, pp. 529–38.
34. E.M. Bellhouse and J.R. McDermid: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1539–53.10.1007/s11661-010-0192-8 ↗
35. J.R. McDermid, M.H. Kaye, and W.T. Thompson: Metall. Mater. Trans. B, 2007, vol. 38B, pp. 215–30.10.1007/s11663-007-9028-3 ↗
36. H.A. Fine and G.H. Geiger: Handbook on Material and Energy Balance Calculations in Metallurgical Processes, TMS-AIME, Warrendale, PA, 1979, pp. 385 and 428.
37. B.R. Strohmeier and D.M. Hercules: J. Phys. Chem., 1984, vol. 88, pp. 4922–29.10.1021/j150665a026 ↗
38. W.H. Casey, M.F. Hochella, Jr., and H.R. Westrich: Geochimica Cosmochimica Acta, 1993, vol. 57, pp. 785–93.10.1016/0016-7037(93)90168-V ↗
39. I. Parezanović and M. Spiegel: Steel Res. Int., 2005, vol. 76, pp. 832–39.10.1002/srin.200506102 ↗
40. X. Vanden Eynde, J.P. Servais, and M. Lamberigts: Proc. 6th Int. Conf. on Zinc Alloy Coated Steel Sheet, Chicago, IL, Apr. 4–7, 2004, Association for Iron and Steel Technology, Warrendale, PA, pp. 361–72.
41. J. Finster: Surf. Interface Anal., 1998, vol. 12, pp. 309–14.10.1002/sia.740120507 ↗
42. H.J. Grabke, V. Leroy, and H. Viefhaus: ISIJ Int., 1995, vol. 35, pp. 95–113.10.2355/isijinternational.35.95 ↗
43. Y.F. Gong, Y.R. Lee, H.S. Kim, and B.C. De Cooman: Proc. Asia-Pacific Galvanizing Conf. 2009, Jeju, Korea, Nov. 8–12, 2009, The Corrosion Science Society of Korea, Seoul, paper no. A-41.
44. N. Birks, G.H. Meier, and F.S. Pettit: Introduction to the High-Temperature Oxidation of Metals, Cambridge University Press, Cambridge, United Kingdom, 2006, pp. 111 and 138–40.10.1017/CBO9781139163903 ↗
45. W.D. Callister: Materials Science and Engineering: An Introduction, 7th ed., John Wiley & Sons, Inc., New York, NY, pp. A8–A19.
46. G. Simmons and H. Wang: Single Crystal Elastic Constants and Calculated Aggregate Properties: A Handbook, 2nd ed., The M.I.T. Press, Cambridge, MA, 1971, p. 216.
47. R. Wanke: Schweissen Schneiden, 1973, vol. 25, pp. 252–54.
48. S. Guruswamy, S.M. Park, J.P. Hirth, and R.A. Rapp: Oxid. Met., 1986, vol. 26, pp. 77–100.10.1007/BF00664274 ↗
49. J.R. Mackert, R.D. Ringle, and C.W. Fairhurst: J. Dent. Res., 1983, vol. 62, pp. 1229–35.10.1177/00220345830620121201 ↗
50. R.C. Weast: CRC Handbook of Chemistry and Physics, 59th ed., CRC Press, Inc., West Palm Beach, FL, 1978.
51. D.R. Lide: CRC Handbook of Chemistry and Physics, 83rd ed., CRC Press, Inc., Boca Raton, FL, 2002.
52. Z.T. Zhang, I.R. Sohn, F.S. Pettit, G.H. Meier, and S. Sridhar: Metall. Mater. Trans. B, 2009, vol. 40B, pp. 567–84.10.1007/s11663-009-9255-x ↗
53. O. Kubaschewski and C.B. Alcock: Metallurgical Thermochemistry, 5th ed., Pergamon Press, Oxford, United Kingdom, 1979, p. 382.
54. J.-H. Huang and E. Rosén: Phys. Chem. Minerals, 1994, vol. 21, pp. 228–33.10.1007/BF00202136 ↗
55. L.M. Lenev and I.A. Novokhatskiy: Russian Metallurgy (abridged English translation of Izvetiya Akademii Nauk SSSR, Mentally), 1966, vol. 3, pp. 40–41.
56. N.Y. Tang: Zinc-Based Steel Coating Systems: Production and Performance, TMS, Warrendale, PA, 1998, pp. 3–12.
57. R. Khondker, A. Mertens, and J.R. McDermid: Mater. Sci. Eng. A, 2007, vol. 463, pp. 157–65.10.1016/j.msea.2006.09.116 ↗