Brazing of zirconia with AgCuTi and SnAgTi active filler metals
Source abstract
Abstract
The self-brazing of partially stabilized zirconia using Ag27Cu3Ti and Sn10Ag4Ti active filler metals is investigated. It was shown that the contact angles of Ag27Cu3Ti and Sn10Ag4Ti on zirconia decreased with the increase of brazing temperature and remained constant at about 34 deg and 44 deg above 900 °C, respectively. The flexural strengths were 227 and 137 MPa for ZrO2/Ag27Cu3Ti/ZrO2 and ZrO2/Sn10Ag4Ti/ZrO2, respectively, after brazing at 900 °C for 10 minutes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aerogels and thermal insulation · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. O.M. Akselsen: J. Mater. Sci., 1992, vol. 27, pp. 1989–2000.10.1007/BF01117909 ↗
2. M.G. Nicholas: Proc. 3rd Int. Conf. Joining Ceramics, Glass and Metal, W. Kraft, ed., Bad Nauheim, Germany, W. Kraft, ed., Deutsche Gesellschaft Metallkunde e.V., Oberursel, 1989, pp. 3–16.
3. H. Mizuhara and E. Huebel: Weld. J., 1986, vol. 65 (10), pp. 43–45.
4. T. Yano, H. Suematsu, and T. Iseki: J. Mater. Sci., 1988, vol. 23, pp. 3362–66.10.1007/BF00551319 ↗
5. J.K. Boadi, T. Yano, and T. Iseki: J. Mater. Sci., 1987, vol. 22, pp. 2431–34.10.1007/BF01082127 ↗
6. R. Xu and J.E. Indacochea: J. Mater. Eng. Perf., 1994, vol. 3 (5), pp. 596–605.10.1007/BF02645257 ↗
7. M.G. Nicholas and L.M. Jones: Schweissen Schneiden (Welding Cutting, Germany), 1992, vol. 44 (7), pp. 376–79.
8. R.R. Kapoor and T.W. Eagar: J. Am. Ceram. Soc., 1989, vol. 72 (3), pp. 448–54.10.1111/j.1151-2916.1989.tb06151.x ↗
9. E. Lugscheider, W. Tillmann, and W. Weise: Proc. 4th Int. Conf. Joining Ceramics, Glass and Metal, Koenigswinter, Germany, 1993, H. Krappitz and H.A. Schaeffer, eds., Deutsche Glastechnische Gesellschaft e.V., Frankfurt M., 1993, pp. 97–107.
10. L. Dorn and N. Munasinghe: Proc. 5th Int. Conf. Joining Ceramics, Glass and Metal, Jena, Germany, M. Turwitt, ed., DVS-Berichte Band 184, Deutscher Verlag Schweisstechnik, Düsseldorf, 1997, pp. 34–36.
11. T. Okamoto: Iron Steel Inst. Jpn. Int., 1990, vol. 30, pp. 1033–40.10.2355/isijinternational.30.1033 ↗
12. Y.S. Chung and T. Iseki: Eng. Fract. Mech., 1991, vol. 40 (4–5), pp. 941–49.10.1016/0013-7944(91)90255-Y ↗
13. A.J. Moorhead and H. Keating: Weld. J., 1986, vol. 65 (10), pp. 17–31.
14. C. Peytour, F. Barbier, and A. Revcolevschi: J. Mater. Res., 1990, vol. 5 (1), pp. 127–35.10.1557/JMR.1990.0127 ↗
15. H. Hao, Z. Jin, and X. Wang: J. Mater. Sci., 1994, vol. 29, pp. 5041–46.10.1007/BF01151094 ↗
16. P. Martineau, R. Pailler, M. Lahaye, and R. Naslain: J. Mater. Sci., 1984, vol. 19, pp. 2749–70.10.1007/BF00550832 ↗
17. E. Lugscheider and W. Tillmann: Mater. Manuf. Processes, 1993, vol. 8 (2), pp. 219–38.10.1080/10426919308934826 ↗
18. K.K. Srivastava, R.N. Patil, C.B. Choudhary, K.V.G.K. Gokhale, and E.C. Subbarao: Trans. J. Br. Ceram. Soc., 1974, vol. 73 (3), p. 85; cited from Phase Diagrams for Ceramists, G. Smith, T. Negas, and L.P. Cook, eds., The American Ceramic Society, Westerville, OH, 1981, vol. IV, pp. 141–42.