Transmission Electron Microscopy Study of Strain-Induced Low- and High-Angle Boundary Development in Equal-Channel Angular-Pressed Commercially Pure Aluminum
Source abstract
Abstract
The evolution of the microstructure in a commercially pure aluminum during equal channel angular pressing (ECAP) using route BC was investigated by transmission electron microscopy. Subgrains, or cells, form, which have both high (ϕ > 15 deg) and low (ϕ < 15 deg) misorientation. Misorientations and spacings of cell boundaries were determined from about 250 boundaries per pass of ECAP cell boundaries on the basis of Kikuchi patterns and Moire fringes. The average cell size and misorientation saturate within the first two passes. Misorientations and spacings of high-angle boundaries decrease with the number of passes. After eight passes, the cell size is ≈1.3 μm and the fraction of high-angle boundaries is ≈0.7. The marked differences in the rate of grain structure evolution per pass are linked to differences in the ability of dislocations introduced in new passes to recombine with the existing ones. With increasing ECAP strain, the distribution of misorientations develops strong deviations from the MacKenzie distribution for statistical grain orientation. This is interpreted as a result of the tendency to form equiaxed grains in a textured grain structure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. V.M. Segal, V.I. Reznikov, A.E. Drobyshevskiy, V.I. Kopylov: Russ. Metall., 1981, vol. 1, pp. 99–104
2. Y.T. Zhu, T.C. Lowe: Mater. Sci. Eng. A, 2000, vol. 291, pp. 46–5310.1016/S0921-5093(00)00978-3 ↗
3. V.M. Segal: Mater. Sci. Eng. A, 1995, vol. 197, pp. 157–6410.1016/0921-5093(95)09705-8 ↗
4. Y. Iwahashi, M. Furukawa, Z. Horita, M. Nemoto, T.G. Langdon: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2245–5210.1007/s11661-998-0102-5 ↗
5. M. Furukawa, Z. Horita, M. Nemoto, R.Z. Valiev, T.G. Langdon: Acta Mater., 1996, vol. 44, pp. 4619–2910.1016/1359-6454(96)00105-X ↗
6. P.L. Sun, P.W. Kao, C.P. Chang: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1359–6810.1007/s11661-004-0311-5 ↗
7. P.L. Sun, P.W. Kao, C.P. Chang: Scripta Mater., 2004, vol. 51, pp. 565–7010.1016/j.scriptamat.2004.05.031 ↗
8. S.V. Raj, G. Pharr: Mater. Sci. Eng., 1986, vol. 81, pp. 217–3710.1016/0025-5416(86)90265-X ↗
9. H.J. Frost, M.F. Ashby: Deformation-Mechanism Maps, Pergamon Press, Oxford, United Kingdom, 1982
10. A. Godfrey, D.A. Hughes: Acta Mater., 2000, vol. 48 (8), pp. 1897–190510.1016/S1359-6454(99)00474-7 ↗
11. H.J. McQueen, E. Evangelista, M. Cabibbo, and G. Avramovic-Cingara: unpublished research
12. S.C. Baik, Y. Estrin, H.S. Kim, R.J. Hellmig: Mater. Sci. Eng. A, 2003, vol. 351, pp. 86–9710.1016/S0921-5093(02)00847-X ↗
13. P.B. Prangnell and J.R. Bowen: Ultrafine Grained Materials II, Seattle, WA, Feb. 2002, Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran, and T.C. Lowe, eds., TMS, Warrendale, PA, 2002, pp. 89–97
14. J.A. Wert, Q. Liu, N. Hansen: Acta Mater., 1997, vol. 45, pp. 2565–7610.1016/S1359-6454(96)00348-5 ↗
15. D.A. Hughes: Mater. Sci. Eng. A, 2001, vol. 319, pp. 46–5410.1016/S0921-5093(01)01028-0 ↗
16. Q. Liu, X. Huang, D.J. Lloyd, N. Hansen: Acta Mater., 2002, vol. 50 (15), pp. 3789–380210.1016/S1359-6454(02)00174-X ↗
17. P.J. Hurley, P.S. Bate, F.J. Humphreys: Acta Mater., 2003, vol. 51, pp. 4737–5010.1016/S1359-6454(03)00277-5 ↗
18. H. Weiland: Acta Mater., 1992, vol. 40, pp. 1083–8910.1016/0956-7151(92)90086-T ↗
19. D. Kuhlmann-Wilsdorf: Scripta Metall. Mater., 1996, vol. 34, pp. 641–5010.1016/1359-6462(95)00567-6 ↗
20. M. Cabibbo, E. Evangelista, V. Latini, E. Nes, S. Tangen: Mater. Sci. Forum, 2003, vols. 423–432, pp. 2673–7810.4028/www.scientific.net/MSF.426-432.2673 ↗
21. M. Cabibbo, E. Evangelista, C. Scalabroni: Lamiera, 2005, vol. 6, pp. 50–57
22. M. Cabibbo, E. Evangelista, V. Latini: J. Mater Sci., 2004, vol. 39, pp. 5659–6710.1023/B:JMSC.0000040073.78798.d4 ↗
23. Y. Iwahashi, J.T. Wang, Z. Horita, M. Nemoto, T.G. Langdon: Scripta Mater., 1996, vol. 35 (2), pp. 143–4610.1016/1359-6462(96)00107-8 ↗
24. M. Cabibbo, E. Evangelista, C. Scalabroni: Micron, 2005, vol. 36, pp. 401–1410.1016/j.micron.2005.03.004 ↗
25. Q. Liu, H. Xiaooxu, Y. Mei: Ultramicroscopy, 1992, vol. 41, pp. 317–2110.1016/0304-3991(92)90211-2 ↗
26. D.B. Williams, C.B. Carter: Transmission Electron Microscopy–Diffraction, Plenum Press, New York, NY, 199610.1007/978-1-4757-2519-3 ↗
27. Y. Iwahashi, Z. Horita, M. Nemoto, T. Langdon: Acta Mater., 1998, vol. 46 (9), pp. 3317–3110.1016/S1359-6454(97)00494-1 ↗
28. H.W. Höppel, J. May, P. Eisenlohr, M. Göken: Z. Metallkd., 2005, vol. 96 (6), pp. 566–7110.3139/146.101071 ↗
29. P.B. Berbon, N.K. Tsenev, R.Z. Valiev, M. Furukawa, Z. Horita, M. Nemoto, T.G. Langdon: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2237–4310.1007/s11661-998-0101-6 ↗
30. Z. Horita, T. Fujinami, M. Nemoto, T.G. Langdon: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 691–70110.1007/s11661-000-0011-8 ↗
31. J.Y. Chang, J.S. Yoon, G.H. Kim: Scripta Mater., 2001, vol. 45, pp. 347–5410.1016/S1359-6462(01)01040-5 ↗
32. S.D. Terhune, D.L. Swisher, K. Oh-Ishi, Z. Horita, T.G. Langdon, T.R. McNelley: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2173–8410.1007/s11661-002-0049-x ↗
33. X. Molodova, G. Gottstein, M. Winning, and R.J. Hellmig: Mater. Sci. Eng. A, 2007, vol. 460–463, pp. 204–1310.1016/j.msea.2007.01.042 ↗
34. M. Cabibbo and E. Evangelista: Conf. Proc. ICAA-9, Brisbane, Australia, 2004, IMEA, Brisbane, 2004, pp. 190–95