journal article·2018-11Open access

Process-Defect-Structure-Property Correlations During Laser Powder Bed Fusion of Alloy 718: Role of In Situ and Ex Situ Characterizations

S. J. Foster, K. Carver, R. B. Dinwiddie, F. List, K. A. Unocic, A. Chaudhary, S. S. Babu

Abstract

Components made by laser powder bed fusion (L-PBF) additive processes require extensive trial and error optimization to minimize defects and arrive at targeted microstructure and properties. In this work, in situ infrared thermography and ex situ surface roughness measurements were explored as methodologies to ensure Inconel® 718-part quality. For a given laser energy of 200 Watts, prismatic samples were produced with different exposure times (80 to 110 µs) and point spacings (80 to 110 µm). The infrared intensities from laser–material interaction zones were measured spatially and temporally. The conditions leading to higher IR intensity and lowest surface roughness values correlated well with less porosity and coarse solidification grain structure. The transition from highly columnar to misoriented growth is attributed to changes in thermal gradients and liquid–solid interface velocities. Hardness measurements and electron microscopy of the as-processed and post-processed heat-treated samples show complex transitions in microstructural states including the heavily dislocated FCC matrix, reduction of dislocation density, and copious precipitation, respectively. These results show that the geometry-process-structure-property correlations are dynamic, and they cascade depending on the transitions of phase states from powder to liquid to solid, as well as phase decompositions and deformations within the solid FCC phase. Validity of using analytical weld process models to describe the above phenomena is also highlighted.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. R. A. Roach and S. H. Gardner, Translational Materials Research, 2017, Vol. 4, 04400110.1088/2053-1613/aa8513 ↗
2. M. Seifi, M. Gorelik, J. Waller, N. Hrabe, N. Shamsaei, S. Daniewicz, and J. J. Lewandowski, JOM, 2017, Vol. 69, pp. 439-45510.1007/s11837-017-2265-2 ↗
3. B. H. Jared, M. A. Aguilo, L. L. Behini, B. L. Boyce, B. W. Clark, A. Cook, B. J. Kaehr, and J. Robbins, Scripta Materialia, 2017, Vol. 135, pp. 141-14710.1016/j.scriptamat.2017.02.029 ↗
4. NIST: Measurement Science Roadmap for Metal-based Additive Manufacturing, prepared by Energetics Incorporated, 2013. http://www.nist.gov/el/isd/upload/NISTAdd_Mfg_Report_FINAL-2.pdf.
5. S.K. Everton, M. Hirsch, P.Stravroulakis, R.K. Leach, and A.T. Clare, Mater. Des. 2016, Vol. 95, pp. 431–44510.1016/j.matdes.2016.01.099 ↗
6. H. Krauss, C. Eschey, and M.F. Zaeh: Proc. 23rd Annu. Int. Solid Free. Fabr. Symp. 2012, pp. 999–1014, https://doi.org/10.1017/cbo9781107415324.004.10.1017/cbo9781107415324.004 ↗
7. S. Clijsters, T. Craeghs, S. Buls, K. Kempen, and J. P. Kruth., Int. J. Adv. Manuf. Technol. 2014, Vol. 75, pp. 1089–110110.1007/s00170-014-6214-8 ↗
8. R.B. Dinwiddie, R.R. Dehoff, P.D. Lloyd, L.E. Lowe, and J.B. Ulrich, Thermo-sense Therm. Infrared Appl. Xxxv, 2013, Vol. 8705, pp. 1–9
9. R.B. Dinwiddie, M.M. Kirka, P.D. Lyod, R.R. Dehoff, L.E. Lowe, G.S. Marlow: Proc. SPIE, 2016, Vol. 9861. https://doi.org/10.1117/12.2229070.10.1117/12.2229070 ↗
10. S. Moylan, E. Whitenton, B. Lane, and J. Slotwinski: 40th Annu. Rev. Prog. Quant. Nondestruct. Eval., AIP Conf. Proc. 2014, Vol. 1581, pp. 1191–96. https://doi.org/10.1063/1.4864956.10.1063/1.4864956 ↗
11. G. Marshall, W.J. Young II, N. Shamsaei, J. Craig, T. Wakeman, and S.M. Thompson: Proc. Solid State Free Form. 2015, pp. 259–72. https://sffsymposium.engr.utexas.edu/sites/default/files/2015/2015-21-Marshall.pdf.
12. E. Rodriguez, J. Mireles, C. Terrazas, D. Espalin, M. Perez, and R.B. Wicker, Additive Manufacturing., 2015, Vol. 5, pp. 31–39, https://doi.org/10.1016/j.addma.2014.12.00110.1016/j.addma.2014.12.001 ↗
13. M. Doubenskaia, M. Pavlov, S. Grigoriev, and I. Smurov, Surf. Coatings Technol., 2013, Vol. 220, pp. 244–247, https://doi.org/10.1016/j.surfcoat.2012.10.04410.1016/j.surfcoat.2012.10.044 ↗
14. G. Bi, A. Gasser, K. Wissenbach, A. Drenker, and R. Poprawe, Opt. Lasers Eng., 2006, Vol. 44, pp. 1348–1359, https://doi.org/10.1016/j.optlaseng.2006.01.00910.1016/j.optlaseng.2006.01.009 ↗
15. P. Lott, H. Schleifenbaum, W. Meiners, K. Wissenbacj, C. Hinke and J. Bultmann, Physics Procedia, 2011, Vol. 12, pp. 683-69010.1016/j.phpro.2011.03.085 ↗
16. W. S. Land II, B. Zhang, J. Ziegert and A. Davies, Procedia Manufacturing, 2015, Vol. 1, pp. 393-40310.1016/j.promfg.2015.09.047 ↗
17. S. Huber, J. Glasschroeder and M. F. Zaeh, Physics Procedia, 2011, Vol. 12, pp. 712-71910.1016/j.phpro.2011.03.089 ↗
18. L. Mrna and M. Sarbort, Physics Procedia, 2014, Vol. 56, pp. 1261-126710.1016/j.phpro.2014.08.042 ↗
19. M. Schwalbe: Predicting theoretical and computational approaches for additive manufacturing. Proc. Workshop Natl. Acad. Sci., 201610.17226/23646 ↗
20. ISO/ASTM 52900:2015(E): Standard terminology for additive manufacturing – General principles – Terminology, ASTM International, 2016
21. I. Yadroitsev, A. Gusarov, I. Yadroitdave, I. Smurov, J. Mater. Process. Technol., 2010, Vol. 210, pp. 1624-163110.1016/j.jmatprotec.2010.05.010 ↗
22. I. Yadroitsev and I. Smurov, Physics Procedia, 2010, Vol. 5, pp. 551-56010.1016/j.phpro.2010.08.083 ↗
23. S. Tammas-Williams, H. Zhao, F. Leonard, F. Derguti, I. Todd, and P.B. Prangnell, Materials Characterization, 2015, Vopl. 102, pp. 47-6110.1016/j.matchar.2015.02.008 ↗
24. W. Sames, F. A. List, S. Pannala, R. R. Dehoff and S. S. Babu, International Materials Reviews, 2016, Vol. 61, pp. 315-36010.1080/09506608.2015.1116649 ↗
25. S.S. Babu: in Introduction to Integrated Weld Modeling. ASM Handbook, D.U. Furrer and S.L. Semiatin, eds., ASM International, 2010, vol. 22B.10.31399/asm.hb.v22b.a0005524 ↗
26. S. Yoder, S. Morgan, E. Barnes, C. Kinzy, P. Nandwana, M. Kirka, S. S. Babu, V. Paquit, and R. R. Dehoff, Additive Manufacturing, 2018, Vol. 19, pp. 184-19610.1016/j.addma.2017.12.001 ↗
27. A. Plotkowski, M. M. Kirka, and S. S. Babu, Additive Manufacturing, 2017, Vol. 18, pp. 256-26810.1016/j.addma.2017.10.017 ↗
28. N. Raghavan, A. Plotkowski, R. R. Dehoff, J. A. Turner, M. K. Kirka, and S. S. Babu, Acta Materialia, 2017, Vol. 140, pp. 375-38710.1016/j.actamat.2017.08.038 ↗
29. Z. C. Cordero, R. B. Dinwiddie, and R. R. Dehoff, Journal of Materials Science, 2017, Vol. 52, pp. 3429-343510.1007/s10853-016-0631-z ↗
30. N. Raghavan, S. S. Babu, R. R. Dehoff, S. Pannala, S. Simunovic, M. K. Kirka, J. Turner and N. Carlson, Acta Materialia, 2016, Vol. 112, pp. 303-31410.1016/j.actamat.2016.03.063 ↗
31. J. Raplee, A. Plotkowski, M. Kirka, R. Dinwiddie, A. Okello, R. R. Dehoff and S. S. Babu, Sci. Rep. 2017, Vol. 7, 43554; https://doi.org/10.1038/srep4355410.1038/srep43554 ↗
32. I. Yadroitsev and I. Smurov, Physics Procedia, 2011, Vol. 12, pp. 264-27010.1016/j.phpro.2011.03.034 ↗
33. M. Groeber, E. Schwalbach, W. Musinski, P. Shade, S. Donegan, M. Uchic, D. Sparkman, T. Turner and J. Miller, JOM, 2018, Vol. 70, pp. 441-44410.1007/s11837-018-2806-3 ↗
34. W. Sames, K. Unocic, G. Helmreich; S. S. Babu; R. Dehoff; F. Medina, Additive manufacturing, 2016, Vol. 13, pp. 156-16510.1016/j.addma.2016.09.001 ↗
35. W. Sames, K. Unocic, R. R. Dehoff, T. Lolla and S. S. Babu, Journal of Materials Research, 2014, Vol. 29, pp. 1920-193010.1557/jmr.2014.140 ↗
36. Y. Ogawa, Science and Technology of Welding and Joining, 2011, Vol. 16, pp. 33-4310.1179/136217110X12785889549903 ↗
37. S. Tsukamoto, Science and Technology of Welding and Joining, 2011, Vol. 16, pp. 33-4310.1179/136217110X12785889549949 ↗
38. R. R. Dehoff, W. J. Sames, M. K. Kirka, H. Bilheux, A. S. Tremsin and S. S. Babu, Materials Science and Technology, 2015, Vol. 31, pp. 931-93810.1179/1743284714Y.0000000734 ↗
39. J. Gockel, L. Sheridan, S. P, Barra, N. W. Klingbeil, J. Beuth, JOM, 2017, Vol. 69, pp. 2706-271010.1007/s11837-017-2601-6 ↗
40. C. R. Clymer, J. Cagan, and J. Beuth, Journal of Mechanical Design, 2017, Vol. 139, 10090710.1115/1.4037302 ↗
41. M. Tang, P. C. Pistorious, J. L. Beuth, Additive Manufacturing, 2017, Vol. 14, pp. 39-4810.1016/j.addma.2016.12.001 ↗
42. D. Rosenthal, Welding Journal, 1941, Vol. 20, pp. 220-234
43. P. W. Fuerschbach, Welding Journal, 1996, Vol. 75, pp. 24s-34s
44. M. J. Aziz, Journal of Applied Physics, 1982, Vol. 53, pp. 1158-116810.1063/1.329867 ↗
45. S. S. Babu, J. W. Elmer, J. M. Vitek, and S. A. David, Acta Materialia, 2002, Vol. 50, pp. 4763-478110.1016/S1359-6454(02)00317-8 ↗
46. A. Plotkowski, O. Rios, N. Sridharan, Z. Sims, K. Unocic, R. T. Ott, R. R. Dehoff, and S. S. Babu, Acta Materialia, 2017, Vol. 126, pp. 507-51910.1016/j.actamat.2016.12.065 ↗
47. J. O. Andersson, T. Helander, L. Hoglund, P. F. Shi and B. Sundman, CALPHAD, 2002, Vol. 26, pp. 273-31210.1016/S0364-5916(02)00037-8 ↗
48. M. Gaumann, C. Bezencon, P. Canalis, and W. Kurz, Acta Materialia, 2001, 49: 1051-106210.1016/S1359-6454(00)00367-0 ↗
49. M. Y. Krasnoperov, R. R. G. M. Pieters and I. M. Richardson, Science and Technology of Welding and Joining, 2004, Vol. 9, pp. 501-50610.1179/136217104225021733 ↗
50. S. S. Babu, S. M. Kelly, M. Murugananth, R. P. Martukanitz, Surface Coating and Technology, 2006 Vol. 200, pp. 2663-267110.1016/j.surfcoat.2005.02.160 ↗
51. S. S. Babu, R. P. Martukanitz, K. D. Parks, and S. A. David, Metallurgical and Materials Transactions A, 2002, 33A, 1189-120010.1007/s11661-002-0220-4 ↗
52. C. Villafuerte, H. W. Kerr, and S. A. David, Materials Science and Engineering A, 1995, Vol. 194, pp.187-19110.1016/0921-5093(94)09656-2 ↗
53. J. H. Martin, B. D. Yahata, J. M. Hundley, J. A. Mayer, T. A. Schaedler and T. M. Pollock, Nature, 2017, Vol. 549, pp. 365-36910.1038/nature23894 ↗
54. O. M. Barabash, S. S. Babu, J. M. Vitek, S. A. David, J. -W. Park, J. A. Horton, G. E. Ice, and R. I. Barabash, J. App. Physics, 2004, Vol. 96, pp. 3673 – 3679
55. O. M. Barabash, S. S. Babu, S. A. David, J. M. Vitek and R. I. Barabash, Journal of Applied Physics, 2003, 94, No. 1., 738-74210.1063/1.1579863 ↗
56. P. J. Withers and H. K. D. H. Bhadeshia, Materials Science and Technology, 2001, Vol. 17, pp. 366-37510.1179/026708301101510087 ↗
57. D. Wian, J. Xue, A. X. Zhang, Y. Li, N. Tamura, Z. Song and K. Chen, Scientific Reports, 2017, 7: 285910.1038/s41598-017-03051-x ↗
58. Y. M. Wang, T. Voisin, J. T. McKeown, J. Ye, N. P. Calta, Z. Li, Z. Zeng, Y. Zhang, W. Chen, T. T. Roehling, R. T. Ott, M. K. Santala, P. J. Depond, M. J. Matthews, A. V. Hamza and T. Zhu, Nature Materials, 2018, Vol. 17, pp. 63-7110.1038/nmat5021 ↗
59. S.S. Babu: in Proc. Int. Conf. Solid–Solid Phase Transform. Inorg. Mater. M. Millitzer, G. Botton, L.-Q. Chen, J. How, C. Sinclair, and H. Zurob (eds.) TMS, 2015, pp. 1019–26
60. K.T. Makiewicz: MS Thesis, The Ohio State University, 2013
61. S. Fukumoto and W. Kurz, ISIJ International, 1999, Vol. 39, pp. 1270-127910.2355/isijinternational.39.1270 ↗
62. J. A. Dantzig and M. Rappaz, “Solidification,” 2nd Edition, EPFL Press, Lausanne, 2016
63. S. S. Babu, International Materials Reviews, 2009, Vol. 54, pp. 333-36710.1179/095066009X12506720908654 ↗
64. S. J. Jones and H. K. D. H. Bhadeshia, Acta Materialia, Vol. 45, pp. 2911-2920, 199710.1016/S1359-6454(96)00392-8 ↗
65. J. W. Christian, “The theory of transformations in metals and alloys v1 and v2,”1st Edition, Pergamon Press, Oxford, 2002