journal article·2018-05Open access

Mechanical Properties and Microstructural Characterization of Aged Nickel-based Alloy 625 Weld Metal

Cleiton Carvalho Silva, Victor Hugo C. de Albuquerque, Emerson Mendonça Miná, Elineudo P. Moura, João Manuel R. S. Tavares

Abstract

The aim of this work was to evaluate the different phases formed during solidification and after thermal aging of the as-welded 625 nickel-based alloy, as well as the influence of microstructural changes on the mechanical properties. The experiments addressed aging temperatures of 650 and 950 °C for 10, 100, and 200 hours. The samples were analyzed by electron microscopy, microanalysis, and X-ray diffraction in order to identify the secondary phases. Mechanical tests such as hardness, microhardness, and Charpy-V impact test were performed. Nondestructive ultrasonic inspection was also conducted to correlate the acquired signals with mechanical and microstructural properties. The results show that the alloy under study experienced microstructural changes when aged at 650 °C. The aging was responsible by the dissolution of the Laves phase formed during the solidification and the appearance of γ″ phase within interdendritic region and fine carbides along the solidification grain boundaries. However, when it was aged at 950 °C, the Laves phase was continuously dissolved and the excess Nb caused the precipitation of the δ-phase (Ni3Nb), which was intensified at 10 hours of aging, with subsequent dissolution for longer periods such as 200 hours. Even when subjected to significant microstructural changes, the mechanical properties, especially toughness, were not sensitive to the dissolution and/or precipitation of the secondary phases.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. [1] F.G. Hodge: JOM, 2006, vol. 58, pp. 28–31.10.1007/s11837-006-0078-9 ↗
2. [2] C.T. Sims, N.S. Stoloff, W.C. Hagel. Superalloys II. John Wiley & Sons, New York, USA, 1987.
3. [3] J. N. Dupont, S. Babu, S. Liu: Metall. Mater. Trans. A, 2016, vol. 44, pp 3385–410.
4. [4] P.M. Mignanelli, N.G. Jones, K.M. Perkins, M.C. Hardy, H.J. Stone: Mater. Sci. Eng. A, 2015, vol 621, pp. 265–71.10.1016/j.msea.2014.10.071 ↗
5. [5] E. M. Miná, Y. C. da Silva, J. Dille, C. C. Silva: Metall. Mater. Trans. A, 2016, vol. 47A, pp 6138–47.10.1007/s11661-016-3786-y ↗
6. [6] M. Sundararaman, L.Kumar,G. Eswara Prasad, P. Mukhopadhyay, S. Banerjee: Metall. Mat. Trans. A, 1999, vol. 30A, pp. 41–52.10.1007/s11661-999-0194-6 ↗
7. [7] S.S. Hosseono, S. Nategh, A.A. Ekrami: J. Alloys Compd., 2012, vol. 512, pp. 340–50.10.1016/j.jallcom.2011.09.094 ↗
8. [8] L. M. Suave, J. Cormier, P. Villechaise, A. Soula, Z. Hervier, D. Bertheau, J. Laigo: Metall. Mater. Trans. A, 2014, Vol. 45A, pp 2963–82.10.1007/s11661-014-2256-7 ↗
9. [9] Y.J. Zhang, Y.J. Huang, L. Yang, J.G. Li: J. Alloys Compd., 2013, vol. 570, pp. 70–75.10.1016/j.jallcom.2013.03.085 ↗
10. [10] C.C. Silva, C.R.M. Afonso, A.J. Ramirez, M.F. Motta, H.C. Miranda, J.P. Farias: J. Alloys Compd., 2016, vol. 684, pp. 628–42.10.1016/j.jallcom.2016.05.231 ↗
11. [11] D. Verdi,, M.A. Garrido, C.J. Múnez, P. Poza: Mater. Des., 2015, vol. 67, pp. 20–27.10.1016/j.matdes.2014.10.086 ↗
12. [12] T.E. Abioye, D.G. McCartney, A.T. Clare: J. Mater. Process. Technol., 2015, vol. 217, pp. 232–40.10.1016/j.jmatprotec.2014.10.024 ↗
13. [13] J.N. Dupont: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3612–20.10.1007/BF02595452 ↗
14. [14] M. J. Cieslak, T. J. Headley, T. Kollie, A. D. Romig: Metall Trans A, 1988, vol. 19A, pp. 2319–31.10.1007/BF02645056 ↗
15. [15] J. N. DuPont, C. V. Robino, J. R. Michael, M. R. Notis, A. R. Marder: Metall Mater Trans A, 1998, vol. 29A, pp. 2785–96.10.1007/s11661-998-0319-3 ↗
16. [16] J. K. Chakravartty, J. B. Singh, M. Sundararaman: Mater. Sci. Technol. 2012, vol. 28, pp. 702–10.10.1179/1743284711Y.0000000118 ↗
17. [17] P. Liu, J.O. Nilsson: Mater. Sci. Technol. 1990, vol. 6, pp. 764–71.10.1179/mst.1990.6.8.764 ↗
18. [18] J. Mittra, S. Banerjee, R. Tewari, G.K. Dey: Mater. Sci. Eng. A., 2013, vol. 574, pp. 86–93.10.1016/j.msea.2013.03.021 ↗
19. C. Thomas, P. Tait: Int. J. Press. Vessels Pip.: 1994, vol. 59, pp. 41–49.10.1016/0308-0161(94)90140-6 ↗
20. [20] S. Floreen, G.E. Fuch, W.J. Yang. In: E.A. Loria (Ed.), Superalloys 718, 625, 706 and Various Derivatives, TMS, Warrendale, PA (1994), pp. 13–37.10.7449/1994/Superalloys_1994_13_37 ↗
21. [21] J. J. Schirra, R. H. Caless, R. W. Hatala. In: E. A. Loria (Ed.), Superalloys 718, 625, 706 and Various Derivatives, TMS, Warrendale, PA (1991), pp. 375–88.10.7449/1991/Superalloys_1991_375_388 ↗
22. [22] V.H.C. Albuquerque, C.C. Silva, T.I.S. Menezes, J.P. Farias, J.M.R.S. Tavares: Microsc. Res. Tech., 2011, vol. 74, pp. 36–46.10.1002/jemt.20870 ↗
23. [23] V. L. A. Freitas, V. H. C. Albuquerque, E. M. Silva, A. A. Silva, J. M. R. S. Tavares: Mater. Sci. Eng. A: 2010, vol. 527, pp. 4431–37.10.1016/j.msea.2010.03.090 ↗
24. [24] E.M. Silva, V.H.C. Albuquerque, J.P. Leite, A.C.G. Varela, E.P. Moura, J.M.R.S. Tavares: Mater. Sci. Eng. A., 2009, vol. 516, pp. 126–30.10.1016/j.msea.2009.03.004 ↗
25. [25] V. H. C. Albuquerque, C. C. Silva, P. G. Normando, E. P. Moura, J. M. R. S. Tavares: Mater. Des., 2012, vol. 36, pp. 37–47.10.1016/j.matdes.2011.11.035 ↗
26. [26] T. M. Nunes, V. H. C. Albuquerque, J. P. Papa, C. C. Silva, P. G. Normando, E. P. Moura, J. M. R. S. Tavares: Expert Syst. Appl., 2013, vol. 40, pp. 3096–105.10.1016/j.eswa.2012.12.025 ↗
27. V.H.C. Albuquerque, C.V. Barbosa, C. C. Silva, E.P. Moura, P.P. RebouçasFilho, J.P. Papa, J.M.R.S. Tavares. Sensors, 2015, vol. 15, pp. 12474–49.10.3390/s150612474 ↗
28. [28] F.E. Silva, F.N.C. Freitas, H.F.G. Abreu, L.L. Gonçalves, E.P. Moura, M.R. Silva: J. Mater. Sci., 2011, vol. 46, pp. 3282–90.10.1007/s10853-010-5215-8 ↗
29. [29] E. M. Silva, J. P. Leite, F. A. França Neto, W. M. L. Fialho, V. H. C. Albuquerque, J. M. R. S. Tavares: J. Test. Eval., 2016, vol. 44, pp. 2003–13.10.1520/JTE20140535 ↗
30. [30] V. Shankar, K.B.S. Rao, S.L. Mannan: J. Nuclear Mater., 2001, vol. 288, pp. 222–32.10.1016/S0022-3115(00)00723-6 ↗
31. [31] A. Mostafaei, E.L. Stevens, E.T. Hughes, S.D. Biery, C. Hilla, M. Chmielus: Mater. Des., 2016, vol. 111, pp. 482–91.10.1016/j.matdes.2016.08.083 ↗
32. [32] Ö. Özgün, H. Ö. Gülsoy, R. Yilmaz, F. Findik: J. Alloys Compd., 2013, vol. 546, pp 192–207.10.1016/j.jallcom.2012.08.069 ↗
33. [33] E.A. Lass, M.R. Stoudt, M.E. Williams, M.B. Katz, L.E. Levine, T.Q. Phan, T.H. Gnaeupel-Herold, D.S. Ng: Metall. Mater. Trans. A, 2017, vol 48A, pp. 5547–58.10.1007/s11661-017-4304-6 ↗
34. E. Mohammadi Zahrani, A.M. Alfantazi, Metall. Mater. Trans. A, 2013, 44A, pp. 4671–99.10.1007/s11661-013-1803-y ↗
35. [35] D.H. Bechetti, J.N. DuPont, J.J. de Barbadillo, B.A. Baker, M. Watanabe: Metall and Mat Trans A, 2015, vol 46, pp. 739–55.10.1007/s11661-014-2682-6 ↗
36. [36] P. G. Normando, E. P. Moura, J. A. Souza, S. S. M. Tavares, L. R. Padovese: Mat. Sci. Eng. A, 2010, vol. 527, pp. 2886–91.10.1016/j.msea.2010.01.017 ↗
37. ASNT 147/147WCD, Nondestructive Testing Handbook, 3rd ed., vol. 7, Ultrasonic Testing, American Society for Nondestructive Testing, 2007.
38. [38] C.T. Sims, N.S. Stoloff, W.C. Hagel (Eds.) Superalloys II. Wiley, New York (1987).
39. [39] M. Sundararaman, L. Kumar, G. Eswara Prasad, P. Mukhopadhyay, S. Banerjee: Metall. Mat. Trans. A, 1999, vol. 30A, pp. 41–52.10.1007/s11661-999-0194-6 ↗
40. [40] E.M. Miná, Y.C. Silva, J. Dille, M.F. Motta, H.C. Miranda, C.C. Silva: Mater. Charact. 2017, vol. 133, pp. 10–16.10.1016/j.matchar.2017.09.014 ↗
41. [41] A. Kumar, V. Shankar, T. Jayakumar, K.B.S. Rao, B. Raj: Phil. Mag. A, 2002, vol. 82, pp. 2529–45.10.1080/01418610208240051 ↗
42. [42] C.C. Silva, H.C. Miranda, M.F. Motta, J.P. Farias, C.R.M. Afonso, A.J. Ramirez: J. Mater. Res. Tech., 2013, vol. 2, pp. 228–37.10.1016/j.jmrt.2013.02.008 ↗
43. [43] C.C. Silva, C.R.M. Afonso, A.J. Ramirez, M.F. Motta, H.C. Miranda, J.P. Farias: Sold. Insp., 2012, vol. 17, pp. 251–63.10.1590/S0104-92242012000300009 ↗
44. W. Lengauer. Transition metal carbides, nitrides and carbonitrides. In: R. Riedel (Ed.), Handbook of Ceramic Hard Materials, vol. 1, Wiley, Weinheim (2000), pp. 202–52.10.1002/9783527618217.ch7 ↗
45. [45] N.D. Evans, P.J. Mazias, J.P. Shingledecker, Y. Yamamoto: Mater. Sci. Eng. A, 2008, vol. 498, pp. 412–20.10.1016/j.msea.2008.08.017 ↗
46. M. Sundararaman, R. Kishore, and P. Mukhopadhyay: in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Pittsburgh, 1994, pp. 405–17.10.7449/1994/Superalloys_1994_405_418 ↗
47. H.C. Pai and M. Sundararaman: in Superalloys 718, 625, 706 and Derivatives, E.A. Loria, ed., TMS, Pittsburgh, 2005, pp. 487–95.10.7449/2005/Superalloys_2005_487_495 ↗
48. [48] M. Sundararaman, P. Mukhopadhyay, S. Banerjee: Metall. Trans. A, 1988, vol. 19A, pp. 453-65.10.1007/BF02649259 ↗
49. [49] S.H. Zhang, H.-Y. Zhang, M. Cheng: Mater. Sci. Eng. A: 2011, vol. 528, pp. 6253–58.10.1016/j.msea.2011.04.074 ↗
50. [50] N. Kashaev, M. Horstmann, V. Ventzke, S. Riekehr, N. Huber: J. Mater. Res. Tech., 2013, vol. 2, pp. 43–47.10.1016/j.jmrt.2013.03.003 ↗
51. [51] J. Deleume, J.-M. Cloué, E. Andrieu: J. Nucl. Mater, 2008, vol. 382, pp. 70–75.10.1016/j.jnucmat.2008.09.018 ↗
52. [52] F. Cortial, J.M. Corrieu, C. Vernot-Loier: Metall. Mater. Trans. A., 1995, vol. 26A, pp. 1273–86.10.1007/BF02670621 ↗
53. [53] C.C. Silva, H.C. Miranda, M.F. Motta, D.C.F. Ferreira, R.R. Marinho, G. Dalpiaz: Mater. Sci. Forum, 2014, vol. 783-786, pp. 2816–21.10.4028/www.scientific.net/MSF.783-786.2816 ↗
54. [54] I. Kirman, D.H. Warrington: Metall. Trans. A., 1970, vol. 10, pp. 2667–75.10.1007/BF03037800 ↗
55. [55] V. Shankar, M. Valsan, K. Bhanu Sankara Rao, S.L. Mannan: Scripta Mater, 2001, vol. 44, pp. 2703–11.10.1016/S1359-6462(01)00965-4 ↗
56. M. Kohler: in Superalloys 718, 612 and Various Derivatives, E. A. Loria, ed., TMS, Warrendale, 1991.
57. A. Kumar, V. Shankar, T. Jayakumar, K.B.S. Rao, and B. Raj: Proceedings of the European Conference in Nondestructive Testing, J. Serrano, ed., Barcelona, Spain, 2002.
58. [58] M.D. Mathew, K. Bhanu Sankara Rao, S.L. Mannan: Mater. Sci. Eng. A, 2004, vol. 372, pp. 327–33.10.1016/j.msea.2004.01.042 ↗
59. [59] D. Cai, W. Zhang, P. Nie, W. Liu, M. Yao: Mater. Charact. 2007, vol. 58, pp. 220–25.10.1016/j.matchar.2006.04.020 ↗
60. [60] X. Xing, X. Di, B. Wang: J. Alloys Compd., 2014, vol. 593, pp. 110–16.10.1016/j.jallcom.2013.12.224 ↗
61. L. Ferrer, B. Pieraggi, J.F. Uginet: in Superalloys 718, 612 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, 1991.
62. M.G. Burke, M.K. Miller: Superalloys 718, 612 and Various Derivatives, E. A. Loria, ed., TMS, Warrendale, PA, 1991.
63. D.D. Krueger: in Superalloy 718—Metallurgy and Application. E.A. Loria, ed., TMS, 1989, pp. 279–96.10.7449/1989/Superalloys_1989_279_296 ↗
64. [64] C.B. Shoemaker, A.H. Fox, D.P. Shoemaker: Acta Cryst. 1960, vol. 13, pp. 585–87.10.1107/S0365110X60001400 ↗
65. [65] J. Sheng, S. Huang, J.Z. Zhou, Z.W. Wang: Eng. Fract. Mech. 2017, vol. 169, pp. 99–108.10.1016/j.engfracmech.2016.11.016 ↗
66. [66] L. M. Suave, J. Cormier, D. Bertheau, P. Villechaise, A. Soula, Z. Hervier, F. Hamon: Mater. Sci. Eng. A, 2016, vol. 650, pp 161–70.10.1016/j.msea.2015.10.023 ↗
67. L.M. Suave, D. Bertheau, J. Cormier, P. Villechaise, A. Soula, Z. Hervier, J. Laigo: Eurosuperalloys 2014, Giens, France, Matec Web of Conferences, J.-Y. Guédouetal eds., 2014, p. 21001.10.1051/matecconf/20141421001 ↗