journal article·2017-01

Mechanical Properties and Microstructural Characterization of Cu-4.3 Pct Sn Fabricated by Selective Laser Melting

Anthony P. Ventura, C. Austin Wade, Gregory Pawlikowski, Martin Bayes, Masashi Watanabe, Wojciech Z. Misiolek

Publisher page

Abstract

Components were fabricated via selective laser melting (SLM) of prealloyed Cu-4.3 pct Sn powder and heat treated at 873 K and 1173 K (600 °C and 900 °C) for 1 hour. Tensile testing, conductivity measurement, and detailed microstructural characterization were carried out on samples in the as-printed and heat-treated conditions. Optimization of build parameters resulted in samples with around 97 pct density with a yield strength of 274 MPa, an electrical conductivity of 24.1 pct IACS, and an elongation of 5.6 pct. Heat treatment resulted in lower yield strength with significant increases in ductility due to recrystallization and a decrease in dislocation density. Tensile sample geometry and surface finish also showed a significant effect on measured yield strength but a negligible change in measured ductility. Microstructural characterization indicated that grains primarily grow epitaxially with a submicron cellular solidification substructure. Nanometer scale tin dioxide particles identified via X-ray diffraction were found throughout the structure in the tin-rich intercellular regions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. I. Gibson, D. Rosen, and B. Stucker: Additive Manufacturing Technologies,1st ed., Springer, New York, NY, 2010, p. 459.10.1007/978-1-4419-1120-9 ↗
2. J.P. Kruth et al.: Rap. Prototyp. J., 2005, vol. 11 (1), pp. 26–36.10.1108/13552540510573365 ↗
3. D. Ramirez et al.: Acta Mater., 2011, vol. 59 (10), pp. 4088–99.10.1016/j.actamat.2011.03.033 ↗
4. M. Lodes, R. Guschlbauer, and C. Körner: Mater. Lett., 2015, vol. 143, pp. 298–301.10.1016/j.matlet.2014.12.105 ↗
5. N. Tolochko et al.: Rap. Prototyp. J., 2000, vol. 6 (3), pp. 155–61.10.1108/13552540010337029 ↗
6. S. Pogson et al.: Rap. Prototyp. J., 2003, vol. 9 (5), pp. 334–43.10.1108/13552540310502239 ↗
7. D. Gu et al.: Int. Mater. Rev., 2012, vol. 57 (3), pp. 133–6410.1179/1743280411Y.0000000014 ↗
8. B. Song et al.: Front. Mech. Eng., 2015, vol. 10 (2), pp. 111–25.10.1007/s11465-015-0341-2 ↗
9. L. Loh et al.: Int. J. Heat Mass Transfer, 2015, vol. 80, pp. 288–300.10.1016/j.ijheatmasstransfer.2014.09.014 ↗
10. L. Thijs et al.: Acta Mater., 2010, vol. 58 (9), pp. 3303–12.10.1016/j.actamat.2010.02.004 ↗
11. E. Yasa and J.P. Kruth: Proc. Eng., 2011, vol. 19, pp. 389–95.10.1016/j.proeng.2011.11.130 ↗
12. W. Shifeng et al.: J. Mater. Process. Technol., 2014, vol. 214 (11), pp. 2660–67.10.1016/j.jmatprotec.2014.06.002 ↗
13. B. Vrancken et al.: J. Alloys Compds., 2012, vol. 541, pp. 177–85.10.1016/j.jallcom.2012.07.022 ↗
14. A.A. Antonysamy et al.: Mater. Charact., 2013, vol. 84, pp. 153–68.10.1016/j.matchar.2013.07.012 ↗
15. J. Donoghue et al.: Mater. Charact., 2016, vol. 114, pp. 103–14.10.1016/j.matchar.2016.02.001 ↗
16. L. Thijs et al.: Acta Mater., 2013, vol. 61 (5), pp. 1809–19.10.1016/j.actamat.2012.11.052 ↗
17. T. Niendorf et al.: Metall. Mater. Trans. B, 2013, vol. 44B, pp. 794–96.10.1007/s11663-013-9875-z ↗
18. J. Davis: ASM Specialty Handbook: Copper and Copper Alloys, 1st ed., ASM International, Materials Park, OH, 2001, pp. 3–5 and 32–50.
19. S. Kou: Welding Metallurgy, 1st ed., John Wiley & Sons, Hoboken, NJ, 2003, p. 478.
20. T. Kals and R. Eckstein: J. Mater. Process. Technol., 2000, vol. 103 (1), pp. 95–101.10.1016/S0924-0136(00)00391-5 ↗
21. C.H. Suh, Y.C. Jung, and Y.S. Kim: J. Mater. Sci. Technol., 2010, vol. 24 (10), pp. 2091–98.
22. B. Vrancken et al.: Solid Freeform Fabrication Symp. Proc., 2013, pp. 393–407.
23. P. Mercelis and J.P. Kruth: Rap. Prototyp. J., 2006, vol. 12 (5), pp. 254–65.10.1108/13552540610707013 ↗
24. H. McQueen and W.J M. G Tegart: Sci. Am., 1975, vol. 232 (4), pp. 116–25.10.1038/scientificamerican0475-116 ↗
25. H. Ellingham: J. Soc. Chem. Ind., 1944, vol. 63 (5), pp. 125–60.10.1002/jctb.5000630501 ↗
26. D. Porterling and K. Easterling: Phase Transformations in Metals and Alloys, 3rd ed., Boca Raton, FL, 2009, pp. 100–04.