journal article·2010-08Open access

Scaling of Dislocation Strengthening by Multiple Obstacle Types

Y. Dong, T. Nogaret, W.A. Curtin

Abstract

Strengthening of dislocations by multiple obstacle types occurs in many engineering alloys. Theories have rationalized two different scaling laws for the total strength, \( \taut\alpha = \tau1\alpha + \tau2\alpha , \) with α = 1 or 2, where τ1 and τ2 are the strengths of the two individual obstacle types. Simulations have clearly demonstrated α = 2, while “friction” strengthening must correspond to α = 1. Here, line-tension simulations of dislocation glide through two types of point obstacles are performed to examine the friction limit. One obstacle type is weak (critical angle approaching 180 deg) but with very high density, approximately corresponding to solute strengthening; and the second obstacle type is stronger (smaller critical angle) but with lower density, approximately corresponding to forest or precipitate strengthening. Additive strengthening α = 1 is obtained when the densities of the two obstacle types differ by more than a factor of ~67, while a transition to α = 2 occurs with increasing density of the second obstacle. These simulations confirm the long-held metallurgical wisdom regarding additivity of solute or friction strengthening with other strengthening mechanisms and also demonstrate that apparent intermediate scaling laws with 1 < α < 2 can arise for a range of relative obstacle densities. Investigation of several literature experimental studies shows some agreement with the model here but quantitative comparisons remain difficult.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. A.S. Argon: Strengthening Mechanisms in Crystal Plasticity, 1st ed., Oxford University Press, New York, NY, 2008, pp. 73–76.
2. W.F. Smith: Structure and Properties of Engineering Alloys, 2nd ed., McGraw-Hill College, New York, NY, 1992, pp. 125–630.
3. B. Reppich, W. Kuhlein, and G. Meyer: Mater. Sci. Eng., 1986, vol. 83, pp. 45–63.10.1016/0025-5416(86)90173-4 ↗
4. R. Ebeling and M.F. Ashby: Philos. Mag., 1966, vol. 13, pp. 805–34.10.1080/14786436608212698 ↗
5. P.B. Hirsch and F.J. Humphreys: Proc. R. Soc. A, 1970, vol. 318, pp. 45–72.10.1098/rspa.1970.0133 ↗
6. C.S. Shin, M.C. Fivel, M. Verdier, and K.H. Oh: Philos. Mag., 2003, vol. 83, pp. 3691–3704.10.1080/14786430310001599379 ↗
7. D.J. Bacon and Y.N. Osetsky: JOM, 2007, vol. 59, pp. 40–45.10.1007/s11837-007-0053-0 ↗
8. Y. Xiang, D.J. Srolovitz, L.T. Cheng, and E. Weinan: Acta Mater., 2004, vol. 52, pp. 1745–60.10.1016/j.actamat.2003.12.016 ↗
9. M. Tang, M. Fivel, and L.P. Kubin: Mater. Sci. Eng. A–Struct. Mater. Prop. Microstruct. Process., 2001, vols. 309–310, pp. 256–60.10.1016/S0921-5093(00)01764-0 ↗
10. R. Madec, B. Devincre, L. Kubin, T. Hoc, and D. Rodney: Science, 2003, vol. 301, pp. 1879–82.10.1126/science.1085477 ↗
11. T. Nogaret, C. Robertson, and D. Rodney: Philos. Mag., 2007, vol. 87, pp. 945–66.10.1080/14786430601011497 ↗
12. M. Hiratani, H.M. Zbib, and B.D. Wirth: Philos. Mag. A–Phys. Condens. Matter Struct. Def. Mech. Prop., 2002, vol. 82, pp. 2709–35.
13. D.L. Olmsted, L.G. Hector, and W.A. Curtin: J. Mech. Phys. Solids, 2006, vol. 54, pp. 1763–88.10.1016/j.jmps.2005.12.008 ↗
14. L. Proville, D. Rodney, Y. Brechet, and G. Martin: Philos. Mag., 2006, vol. 86, pp. 3893–3920.10.1080/14786430600567721 ↗
15. K. Hanson and J.W. Morris: J. Appl. Phys., 1975, vol. 46, pp. 983–90.10.1063/1.321718 ↗
16. J.W. Morris and D.H. Klahn: J. Appl. Phys., 1974, vol. 45, pp. 2027–38.10.1063/1.1663541 ↗
17. S. Altintas and J.W. Morris: Acta Metall., 1986, vol. 34, pp. 801–07.10.1016/0001-6160(86)90053-2 ↗
18. A.J.E. Foreman and M.J. Makin: Philos. Mag., vol. 14, pp. 911–24.10.1080/14786436608244762 ↗
19. R.J. Arsenault and S. Li: Metall. Trans. A, 1978, vol. 20A, pp. 1429–37.
20. T. Nogaret and D. Rodney: Phys. Rev. B, 2006, vol. 74, pp. 143110–16.10.1103/PhysRevB.74.134110 ↗
21. R.C. Picu, R.G. Li, and Z.J. Xu: Mater. Sci. Eng. A–Struct. Mater. Prop. Microstruct. Process., 2009, vol. 502, pp. 164–71.10.1016/j.msea.2008.10.046 ↗
22. J. Friedel: Dislocations, 1st ed., Pergamon Press, Oxford, United Kingdom, 1964, pp. 351–83.10.1016/B978-0-08-013523-6.50018-1 ↗
23. A. Ardel: Metall. Trans. A, 1985, vol. 16A, pp. 2131–65.10.1007/BF02670416 ↗
24. A.J.E. Foreman and M.J. Makin: Can. J. Phys., 1967, vol. 45, pp. 511–17.10.1139/p67-044 ↗
25. U.F. Kocks, A.S. Argon, and M.F. Ashby: Prog. Mater. Sci., 1975, vol. 19, pp. 1–281.10.1016/0079-6425(75)90005-5 ↗
26. P. Haasen: Philos. Mag., 1958, vol. 3, pp. 384–418.10.1080/14786435808236826 ↗
27. R.A. Mulford: Acta Metall., 1979, vol. 27, pp. 1115–24.10.1016/0001-6160(79)90129-9 ↗
28. R.A. Mulford and U.F. Kocks: Acta Metall., 1979, vol. 27, pp. 1125–34.10.1016/0001-6160(79)90130-5 ↗
29. R.A. Mulford and U.F. Kocks: Scripta Metall., 1979, vol. 13, pp. 729–32.10.1016/0036-9748(79)90145-5 ↗
30. G. Monnet and B. Devincre: Philos. Mag., 2006, vol. 86, pp. 1555–65.10.1080/14786430500398425 ↗
31. T.J. Koppenaal and D. Kuhlmann-Wilsdorf: Appl. Phys. Lett., 1964, vol. 4, pp. 59–61.10.1063/1.1753962 ↗
32. K. Hanson and J.J. W. Morris: J. Appl. Phys., 1975, vol. 46, pp. 2378–83.10.1063/1.321917 ↗
33. R. Labusch: Phys. Status Solidi B–Basic Solid State Phys., 1970, vol. 41, pp. 659–69.10.1002/pssb.19700410221 ↗
34. L.M. Brown and R.K. Ham: Strengthening Methods in Crystals, Applied Science publishers Ltd., London, 1971, pp. 10–129.
35. G. Neite, M. Sieve, M. Mrotzek, and E. Nemback: Proc. 4th Risø Int. Symp. Metall. Mater. Sci., 1983, p. 447.
36. U. Lagerpusch, V. Mohles, D. Baither, B. Anczykowski, and E. Nembach: Acta Mater., 2000, vol. 48, pp. 3647–56.10.1016/S1359-6454(00)00172-5 ↗
37. A.W. Zhu, A. Csontos, and E.A. Starke: Acta Mater., 1999, vol. 47, pp. 1713–21.10.1016/S1359-6454(99)00077-4 ↗
38. M. Hiratani and V.V. Bulatov: Philos. Mag. Lett., 2004, vol. 84, pp. 461–70.10.1080/09500830410001726969 ↗
39. D.J. Bacon, U.F. Kocks, and R.O. Scattergood: Philos. Mag., 1973, vol. 28, pp. 1241–63.10.1080/14786437308227997 ↗
40. A.W. Zhu and E.A. Starke: Acta Mater., 1999, vol. 47, pp. 3263–69.10.1016/S1359-6454(99)00179-2 ↗
41. B.J. Diak, K.R. Upadhyaya, and S. Saimoto: Prog. Mater. Sci., 1998, vol. 43, pp. 223–363.10.1016/S0079-6425(98)00007-3 ↗
42. J.W. Morris and D.H. Klahn: J. Appl. Phys., 1973, vol. 44, pp. 4882–90.10.1063/1.1662057 ↗
43. Z.J. Xu and R.C. Picu: Phys. Rev. B, 2007, vol. 76, pp. 094112–20.10.1103/PhysRevB.76.094112 ↗