Quantitative characterization of the three-dimensional microstructure of polycrystalline Al-Sn using X-ray microtomography
Source abstract
Abstract
Characterizing the three-dimensional topology of grain-boundary networks in polycrystalline materials is a crucial step in the modeling of properties that depend on the sample microstructure. Using absorption-contrast X-ray microtomography, we have carried out a large-scale microstructural characterization of polycrystalline Al doped with 2 at. pct Sn, which is immiscible in Al in the solid state. The segregation of Sn to the grain boundaries imparts a strong contrast in X-ray attenuation that can be reconstructed tomographically; however, the nonuniformity of the segregation process presents a formidable challenge to the automated segmentation of the reconstructions. By employing an iterative grain-finding algorithm followed by a novel grain-boundary-network optimization routine (based on a phase-field simulation of grain growth), we were able to extract reliable values for the size and topology of nearly 5000 individual grains in polycrystalline Al-Sn. The distributions and averages of these data deviate significantly from the corresponding microstructural parameters of the three-dimensional (3-D) Poisson-Voronoi tessellation often used to model polycrystalline samples. Much better agreement was observed with microstructures generated by the computer simulation of three-dimensional grain growth.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Advanced Materials Characterization Techniques · Advanced X-ray Imaging Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. K.J. Kurzydłowski and B. Ralph: The Quantitative Description of the Microstructure of Materials, CRC Press, Boca Raton, FL, 1995.
2. R.T. DeHoff: J. Microsc., 1983, vol. 131, pp. 259–63.10.1111/j.1365-2818.1983.tb04254.x ↗
3. D. Brandon and W.D. Kaplan: Microstructural Characterization of Materials, Wiley, Chichester, 1999.
4. F.N. Rhines, K.R. Craig, and D.A. Rousse: Metall. Trans. A, 1976, vol. 7A, pp. 1729–34.10.1007/BF02817891 ↗
5. M. Li, S. Ghosh, T.N. Rouns, H. Weiland, O. Richmond, and W. Hunt: Mater. Characterization, 1998, vol. 41, pp. 81–95.10.1016/S1044-5803(98)00023-0 ↗
6. S.R. Stock: Int. Mater. Rev., 1999, vol. 44, pp. 141–64.10.1179/095066099101528261 ↗
7. M.V. Kral and G. Spanos: Acta Mater., 1999, vol. 47, pp. 711–24.10.1016/S1359-6454(98)00321-8 ↗
8. A. Tewari, A.M. Gokhale, and R.M. German: Acta Mater., 1999, vol. 47, pp. 3721–34.10.1016/S1359-6454(99)00164-0 ↗
9. J.F. Delerue, E. Perrier, Z.Y. Yu, and B. Velde: Phys. Chem. Earth(A), 1999, vol. 24, pp. 639–44.10.1016/S1464-1895(99)00093-9 ↗
10. R.T. DeHoff, E.H. Aigeltinger, and K.R. Craig: J. Microsc., 1971, vol. 95, pp. 69–91.10.1111/j.1365-2818.1972.tb03712.x ↗
11. F.N. Rhines, K.R. Craig, and R.T. DeHoff: Metall. Trans., 1974, vol. 5, pp. 413–25.10.1007/BF02644109 ↗
12. H. Weiland, T.N. Rouns, and J. Liu: Z. Metallkd., 1994, vol. 85, pp. 592–97.
13. G. Liu and H. Yu: Image Anal. Stereol., 2000, vol. 19, pp. 81–84.10.5566/ias.v19.p81-84 ↗
14. G. Liu, H. Yu, and X. Qin: Mater. Sci. Eng. A, 2002, vol. A326, pp. 276–81.10.1016/S0921-5093(01)01497-6 ↗
15. M.V. Kral, M.A. Mangan, G. Spanos, and R.O. Rosenberg: Mater. Characterization, 2000, vol. 45, pp. 17–23.10.1016/S1044-5803(00)00046-2 ↗
16. A. Tewari and A.M. Gokhale: Mater. Characterization, 2001, vol. 46, pp. 329–35.10.1016/S1044-5803(01)00104-8 ↗
17. J. Alkemper and P.W. Voorhees: J. Microsc., 2001, vol. 201, pp. 388–94.10.1046/j.1365-2818.2001.00832.x ↗
18. J.T. Fredrich: Phys. Chem. Earth(A), 1999, vol. 24, pp. 551–61.10.1016/S1464-1895(99)00079-4 ↗
19. U. Bonse and F. Busch: Prog. Biophys. Molec. Biol., 1996, vol. 65, pp. 133–69.10.1016/S0079-6107(96)00011-9 ↗
20. W. Ludwig and D. Bellet: Mater. Sci. Eng. A, 2000, vol. A281, pp. 198–203.10.1016/S0921-5093(99)00733-9 ↗
21. E. Maire, J.-Y. Buffière, L. Salvo, J.J. Blandin, W. Ludwig, and J.M. Létang: Adv. Eng. Mater., 2001, vol. 3, pp. 539–46.10.1002/1527-2648(200108)3:8<539::AID-ADEM539>3.0.CO;2-6 ↗
22. S.F. Nielsen, E.M. Lauridsen, D. Juul Jensen, and H.F. Poulsen: Mater. Sci. Eng. A, 2001, vols. 319–321, pp. 179–81.10.1016/S0921-5093(01)01056-5 ↗
23. B.C. Larson, W. Yang, G.E. Ice, J.D. Budai, and J.Z. Tischler: Nature, 2002, vol. 415, pp. 887–90.10.1038/415887a ↗
24. O.B. Olurin, M. Arnold, C. Korner, and R.F. Singer: Mater. Sci. Eng. A, 2002, vol. A328, pp. 334–43.10.1016/S0921-5093(01)01809-3 ↗
25. X. Cufí, X. Muñoz, J. Freixenet, and J. Martí: Adv. Imaging Electron Phys., 2002, vol. 120, pp. 1–39.
26. W.B. Lindquist: in Developments in X-Ray Tomography III, Proc. SPIE, U. Bonse, ed., SPIE Press, Bellingham, WA, 2002, vol. 4503, pp. 103–15.10.1117/12.452833 ↗
27. C.S. Smith: Metall. Rev., 1964, vol. 9, pp. 1–48.10.1179/095066064790152640 ↗
28. H.V. Atkinson: Acta Metall., 1988, vol. 36, pp. 469–91.10.1016/0001-6160(88)90079-X ↗
29. J. Stavans: Rep. Progs. Phys., 1993, vol. 56, pp. 733–89.10.1088/0034-4885/56/6/002 ↗
30. C.S. Smith: in Metal Interfaces, ASM, Cleveland, OH, 1952, pp. 65–108.
31. J. von Neumann: in Metal Interfaces, ASM, Cleveland, OH, 1952, pp. 108–10.
32. W.W. Mullins: J. Appl. Phys., 1956, vol. 27, pp. 900–04.10.1063/1.1722511 ↗
33. W.W. Mullins: Acta Metall., 1989, vol. 37, pp. 2979–84.10.1016/0001-6160(89)90333-7 ↗
34. J.A. Glazier: Phys. Rev. Lett., 1993, vol. 70, pp. 2170–73.10.1103/PhysRevLett.70.2170 ↗
35. C. Sire: Phys. Rev. Lett., 1994, vol. 72, pp. 420–23.10.1103/PhysRevLett.72.420 ↗
36. S. Hilgenfeldt, A.M. Kraynik, S.A. Koehler, and H.A. Stone: Phys. Rev. Lett., 2001, vol. 86, pp. 2685–88.10.1103/PhysRevLett.86.2685 ↗
37. C. Monnereau and M. Vignes-Adler: Phys. Rev. Lett., 1998, vol. 80, pp. 5228–31.10.1103/PhysRevLett.80.5228 ↗
38. W.M. Williams and C.S. Smith: J. Met., 1952, vol. 4, pp. 755–65.
39. W.J. Boettinger, P.W. Voorhees, R.C. Dobbyn, and H.E. Burdette: Metall. Trans. A, 1987, vol. 18A, pp. 487–90.10.1007/BF02648812 ↗
40. C.E. Krill III, K. Döbrich, D. Michels, A. Michels, C. Rau, T. Weitkamp, A. Snigirev, and R. Birringer: in Developments in X-Ray Tomography III, Proc. SPIE, U. Bonse, ed., SPIE Press, Bellingham, WA, 2002, vol. 4503, pp. 205–12.10.1117/12.452836 ↗
41. K.M. Döbrich: Diploma Thesis, Universität des Saarlandes, Saarbrücken, 2002.
42. A.C. Kak and M. Slaney: Principles of Computerized Tomographic Imaging, IEEE Press, New York, NY, 1988.
43. A.J.C. Wilson, ed.: International Tables for Crystallography, Kluwer Academic Publishers, Dordrecht, 1995, vol. C.
44. E. Horowitz and S. Sahni: Fundamentals of Computer Algorithms, Pitman, London, 1978, pp. 263–68.
45. C. Gratin and F. Meyer: Acta Stereol., 1991, vol. 11 (I), pp. 551–58.
46. H.J. Frost and C.V. Thompson: Curr. Op. Solid State Mater. Sci., 1996, vol. 1, pp. 361–68.10.1016/S1359-0286(96)80026-X ↗
47. D. Fan and L.-Q. Chen: Acta Mater., 1997, vol. 45, pp. 611–22.10.1016/S1359-6454(96)00200-5 ↗
48. D. Fan, C. Geng, and L.-Q. Chen: Acta Mater., 1997, vol. 45, pp. 1115–26.10.1016/S1359-6454(96)00221-2 ↗
49. L.-Q. Chen: Ann. Rev. Mater. Res., 2002, vol. 32, pp. 113–40.10.1146/annurev.matsci.32.112001.132041 ↗
50. L.-Q. Chen, D. Fan, and V. Tikare: in Grain Growth in Polycrystalline Materials III, H. Weiland, B.L. Adams, and A.D. Rollett, eds., TMS, Warrendale, PA, 1998, pp. 137–46.
51. V. Tikare, E.A. Holm, D. Fan, C. Geng, and L.-Q. Chen: Acta Mater., 1998, vol. 47, pp. 363–71.10.1016/S1359-6454(98)00313-9 ↗
52. C.E. Krill III and L.-Q. Chen: Acta Mater., 2002, vol. 50, pp. 3057–73.10.1016/S1359-6454(02)00084-8 ↗
53. G. Liu, H. Yu, X. Song, and X. Qin: Mater. Design, 2001, vol. 22, pp. 33–38.10.1016/S0261-3069(00)00040-6 ↗
54. E. Matzke: Am. J. Botany, 1946, vol. 33, pp. 58–80.10.2307/2437492 ↗
55. M.P. Anderson, G.S. Grest, and D.J. Srolovitz: Phil. Mag. B, 1989, vol. 59, pp. 293–329.10.1080/13642818908220181 ↗
56. J.L. Meijering: Philips Res. Rep., 1953, vol. 8, pp. 270–90.
57. S.K. Kurtz, S. Kumar, J.R. Banavar, and H. Zhang: in Modelling of Coarsening and Grain Growth, C.S. Pande and S.P. Marsh, eds., TMS, Warrendale, PA, 1993, pp. 167–82.
58. C.V. Thompson: Solid State Phys., 2001, vol. 55, pp. 269–314.10.1016/S0081-1947(01)80006-0 ↗
59. A. Miyake: Contrib. Mineral. Petrol., 1998, vol. 130, pp. 121–33.10.1007/s004100050354 ↗
60. K. Fuchizaki, T. Kusaba, and K. Kawasaki: Phil. Mag. B, 1995, vol. 71, pp. 333–57.10.1080/13642819508239038 ↗
61. D. Weygand, Y. Bréchet, J. Lépinoux, and W. Gust: Phil. Mag. B, 1999, vol. 79, pp. 703–16.10.1080/014186399257041 ↗
62. D. Raabe: in Grain Growth in Polycrystalline Materials III, H. Weiland, B.L. Adams, and A.D. Rollett, eds., TMS, Warrendale, PA, 1998, pp. 179–85.
63. F. Wakai, N. Enomoto, and H. Ogawa: Acta Mater., 2000, vol. 48, pp. 1297–311.10.1016/S1359-6454(99)00405-X ↗
64. F. Wakai: J. Mater. Res., 2001, vol. 16, pp. 2136–42.10.1557/JMR.2001.0291 ↗
65. L. Ratke and P.W. Voorhees: Growth and Coarsening: Ostwald Ripening in Material Processing, Springer, Berlin, 2002.10.1007/978-3-662-04884-9 ↗
66. D. Weaire and N. Rivier: Contemp. Phys., 1984, vol. 25, pp. 59–99.10.1080/00107518408210979 ↗