Correlation of microstructure with the wear resistance and fracture toughness of duocast materials composed of high-chromium white cast iron and low-chromium steel
Source abstract
Abstract
The objective of this study is to investigate the correlation of microstructure with wear resistance and fracture toughness in duocast materials that consisted of a high-chromium white cast iron and a low-chromium steel as the wear-resistant and ductile parts, respectively. Different shapes, sizes, volume fractions, and distributions of M7C3 carbides were employed in the wear-resistant part by changing the amount of chromium and molybdenum. In the alloys containing a large amount of chromium, a number of large hexagonal-shaped primary carbides and fine eutectic carbides were formed. These large primary carbides were so hard and brittle that they easily fractured or fell off from the matrix, thereby deteriorating the wear resistance and fracture toughness. In the alloys containing a smaller amount of chromium, however, a network structure of eutectic carbides having a lower hardness than the primary carbides was developed well along solidification cell boundaries and led to the improvement of both wear resistance and toughness. The addition of molybdenum also helped enhance the wear resistance by forming additional M2C carbides without losing the fracture toughness. Under the duocasting conditions used in the present study, the appropriate compositions for wear resistance and fracture toughness were 17 to 18 pct chromium and 2 to 3 pct molybdenum.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. T.E. Norman, A. Soloman, and D.V. Doane: AFS Trans., 1959, vol. 67, pp. 242–56.
2. L.E. Svensson, H.K.D.H. Bhadeshia, B. Gretoft, and B. Ulander: J. Mater. Sci., 1986, vol. 21, pp. 1015–19.10.1007/BF01117388 ↗
3. Metals Handbook, 9th ed., vol. 6, Welding, Brazing and Soldering. ASM, Metals Park, OH, 1983, pp. 771–803.
4. K.G. Budinski: Surface Engineering for Wear Resistance, Prentice-Hall, Englewood Cliffs, NJ, 1988, pp. 242–87.
5. S.K. Ray, M. Mandal, P.K. Bandopadhyay, and A.K. Sengupta: J. Mater. Sci. Lett., 1988, vol. 7, pp. 775–77.10.1007/BF00722096 ↗
6. U.S. Patent, No. 5,238,046, 1993.
7. ASTM Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading, ASTM E855-90, ASTM, Philadelphia, PA, 1990.
8. ASTM Standard Practice for Conducting Dry Sand/Rubber Wheel Abrasion Tests, ASTM G65-85, ASTM, Philadelphia, PA, 1985.
9. Z.-B. Kuang: Eng. Fract. Mech., 1982, vol. 16, pp. 19–33.10.1016/0013-7944(82)90032-7 ↗
10. R.O. Ritchie, B. Francis, and W.L. Server: Metall. Trans. A, 1976, vol. 7A, pp. 831–38.10.1007/BF02644080 ↗
11. R.O. Ritchie and R.M. Horn: Metall. Trans. A, 1978, vol. 9A, pp. 331–41.10.1007/BF02646382 ↗
12. Y.-H. Kim, D. Kwon, and S. Lee: Acta Metall. Mater., 1994, vol. 42, pp. 1887–91.10.1016/0956-7151(94)90013-2 ↗
13. S. Lee, T.H. Kim, and D. Kwon: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2213–23.10.1007/BF02652322 ↗
14. ASTM Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials, ASTM E399-83, ASTM, Philadelphia, PA, 1983, pp. 447–582.
15. S. Lee, K.-S. Sohn, I. Park, and K. Cho: Met. Mater. 1995, vol. 1, pp. 37–46.10.1007/BF03055323 ↗
16. S. Lee, K.-S. Sohn, C.G. Lee, and B.I. Jung: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 123–34.10.1007/s11661-997-0088-4 ↗
17. S. Atamert and H.K.D.H. Bhadeshia: Mater. Sci. Eng., 1990, vol. 130, pp. 101–11.10.1016/0921-5093(90)90085-H ↗
18. N.R. Griffing, W.D. Forgeng, and G.W. Healy: Trans. AIME, 1962, vol. 224, pp. 148–59.
19. R.S. Jackson: J. Iron Steel Inst., 1970, vol. 208, pp. 163–67.
20. W.R. Thorpe and B. Chicco: Metall. Trans. A, 1985, vol. 16A, pp. 1541–49.10.1007/BF02663011 ↗
21. J.O. Andersson: Metall. Trans. A, 1988, vol. 19A, pp. 627–36.10.1007/BF02649276 ↗
22. M. Hillert and C. Qiu: Metall. Trans. A, 1991, vol. 22A, pp. 2187–98.10.1007/BF02664985 ↗
23. W.C. Leslie: The Physical Metallurgy of Steels, McGraw-Hill, New York, NY, 1981, pp. 368–72.
24. K.C. Hwang, S. Lee, and H.C. Lee: Mater. Sci. Eng. A, 1998, vol. A254, pp. 282–95.10.1016/S0921-5093(98)00626-1 ↗
25. S. Lee, S.-H. Choo, E.-R. Baek, S.-H. Ahn, and N.J. Kim: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3881–91.10.1007/BF02595637 ↗
26. J.W. Park, H.C. Lee, and S. Lee: Metall. Mater. Trans. A, 1998, vol. 30A, pp. 399–409.
27. Metals Handbook, 9th ed., vol. 1, Alloy Cast Irons, ASM, Metals Park, OH, 1973, p. 76.