Hydride embrittlement and irradiation effects on the hoop mechanical properties of pressurized water reactor (PWR) and boiling-water reactor (BWR) ZIRCALOY cladding tubes: Part I. Hydride embrittlement in stress-relieved, annealed, and recrystallized ZIRCALOYs at 20 °C and 300 °C
Source abstract
Abstract
This series of articles on the hydride embrittlement effect in ZIRCALOYs consists of three parts. Part III deals with the mechanical properties of some hydrides in some ZIRCALOYs at two temperatures (20 °C and 300 °C). The damage and fracture mechanisms were investigated by SEM in-situ testing. Based on the scanning electron microscopy (SEM) in-situ observations and the mechanical modeling, the mechanical behavior of hydrides confined within a matrix was determined. The hydrides can undergo significant plastic deformation under certain conditions. They have higher strength than the surrounding ZIRCALOY matrix. The radiation effect on hydrided ZIRCALOYs and the combined effect were also discussed. Part I is concerned with the general influence of hydrides on the mechanical properties and damage and fracture mechanisms of ZIRCALOYs at two temperatures (20 °C and 300 °C) and for hydrogen content up to 4500 ppm. In Part II, the morphology and crystallographic structure of hydrides in two ZIRCALOYs are examined at different magnifications and by different techniques (SEM, transmission electron microscopy (TEM), and X-ray diffraction) as a function of their pre-heat treatment and their hydrogen content.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Nuclear reactor physics and engineering · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. J.B. Bai, C. Prioul, and D. François: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1185–97.10.1007/BF02652293 ↗
2. L.A. Simpson: Metall. Trans. A, 1981, vol. 12A, pp. 2113–24.10.1007/BF02644181 ↗
3. D.O. Northwood and U. Kosasih: Int. Met. Rev., 1983, vol. 28, pp. 92–121.10.1179/imr.1983.28.1.92 ↗
4. J.B. Bai, J. Ni, D. Gilbon, C. Prioul, and D. François: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1199–1208.10.1007/BF02652294 ↗
5. J.B. Bai, C. Prioul, and D. Franc;alois: J. of Adv. Sci., 1991, vol. 3, pp. 188–200.10.2978/jsas.3.188 ↗
6. M.P. Puls: Metall. Trans. A, 1991, vol. 22A, pp. 2327–37.10.1007/BF02664999 ↗
7. J.B. Bai: J. Nucl. Sci. Technol., 1996, vol. 33 (2), pp. 141–46.10.3327/jnst.33.141 ↗
8. A.M. Garde, G.P. Smith, and R.C. Pirek: 11th Int. Symp. on Zirconium in the Nuclear Industry, Garmish, Germany, Sept. 1995, E.R. Bradley and G.P. Sabol, eds., ASTM STP 1295, ASTM, Philadelphia, PA, pp. 407–29.
9. S.B. Wisner and R.B. Adamson: GE Fuel, 1996, vol. 3, pp. 1–21.
10. S. Arsène and J.B. Bai: Int. J. Testing Eval., 1996, vol. 24 (6), pp. 386–91.10.1520/JTE11461J ↗
11. S. Arsène and J.B. Bai: Int. J. Testing Eval., 1998, vol. 26 (1), pp. 26–30.10.1520/JTE11966J ↗
12. M. Véléva, S. Arsène, M-Ch. Record, J.L. Béchade, and J.B. Bai: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 567–78.10.1007/s11661-003-0092-2 ↗
13. S. Arsène, J.B. Bai, and P. Bompard: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 579–88.10.1007/s11661-003-0093-1 ↗
14. F. Prat, M. Grange, J. Besson, and E. Andrieu: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1643–51.10.1007/s11661-998-0087-0 ↗
15. J.H. Huang and S.P. Huang: J. Nucl. Mater., 1994, vol. 208, pp. 166–79.10.1016/0022-3115(94)90208-9 ↗
16. J.B. Bai: Ph.D. Thesis, Ecole Centrale de Paris, Paris, Cedex, 1991.
17. I. Aitchison: Application-Related Phenomena for Zirconium and Its Alloys, ASTM STP 458, ASTM, Philadelphia, PA, 1969, pp. 160–78.10.1520/STP43826S ↗
18. R.J. Bourcier and D.A. Koss: Acta Metall., 1984, vol. 32, pp. 2091–99.10.1016/0001-6160(84)90188-3 ↗
19. C.E. Coleman and D. Hardie: J. Less-Common Met., 1966, vol. 2, pp. 168–85.10.1016/0022-5088(66)90003-8 ↗
20. D. Miannay: Mécanique de la rupture, Les Éditions de la Physique, Les Ulis, France, 1995.