journal article·2012-02

Thermal Desorption Analysis of Hydrogen in High Strength Martensitic Steels

M. Enomoto, D. Hirakami, T. Tarui

Publisher page

Abstract

Thermal desorption analyses (TDA) were conducted in high strength martensitic steels containing carbon from 0.33 to 1.0 mass pct, which were charged with hydrogen at 1223 K (950 °C) under hydrogen of one atmospheric pressure and quenched to room temperature. In 0.33C steel, which had the highest Ms temperature, only one desorption peak was observed around 373 K (100 °C), whereas two peaks, one at a similar temperature and the other around and above 573 K (300 °C), were observed in the other steels, the height of the second peak increasing with carbon content. In 0.82C steel, both peaks disappeared during exposure at room temperature in 1 week, whereas the peak heights decreased gradually over 2 weeks in specimens electrolytically charged with hydrogen and aged for varying times at room temperature. From computer simulation, by means of the McNabb–Foster theory coupled with theories of carbon segregation, these peaks are likely to be due to trapping of hydrogen in the strain fields and cores of dislocations, and presumably to a lesser extent in prior austenite grain boundaries. The results also indicate that carbon atoms prevent and even expel hydrogen from trapping sites during quenching and aging in these steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. M. Nagumo: Mater. Sci. Technol., 2004, vol. 20, pp. 940–50.10.1179/026708304225019687 ↗
2. J.J. Au and H.K. Birnbaum: Acta Metall., 1978, vol. 26, pp.1105–16.10.1016/0001-6160(78)90138-4 ↗
3. H. Hagi and Y. Hayashi: Trans. Jpn. Inst. Met., 1987, vol. 28, pp. 375–82.10.2320/matertrans1960.28.375 ↗
4. A. McNabb and P.K. Foster: Trans. TMS-AIME, 1963, vol. 227, pp. 618–27.
5. A.H. Cottrell and B.A. Bilby: Proc. Phys. Soc., 1949, vol. A62, pp. 49–62.10.1088/0370-1298/62/1/308 ↗
6. S. Harper: Phys. Rev., 1951, vol. 83, pp. 709–12.10.1103/PhysRev.83.709 ↗
7. K.W. Andrews: JISI, 1965, vol. 203, pp. 721–27.
8. K. Takai, J. Seki, and Y. Homma: Tetsu-to-Hagané, 1995, vol. 81, pp. 1025–30.10.2355/tetsutohagane1955.81.10_1025 ↗
9. K. Takai, G. Yamauchi, M. Nakamura, and M. Nagumo: Bull. Jpn. Inst. Met., 1998, vol. 62, pp. 267–75.10.2320/jinstmet1952.62.3_267 ↗
10. S.M. Lee and J.Y. Lee: Metall. Trans. A, 1986, vol. 17A, pp. 181–87.10.1007/BF02643893 ↗
11. D. Hirakami and T. Tarui: Nippon Steel Corporation, Futtu, Chiba, Japan, unpublished research, 2010.
12. A. Turnbull, R.B. Hutchings, and D.H. Ferriss: Mater. Sci. Eng., 1997, vol. A238, pp. 317–28.10.1016/S0921-5093(97)00426-7 ↗
13. G.E. Forsythe and W.R. Wasow: Finite-Difference Methods for Partial Differential Equations, Wiley, New York, NY, 1960, pp. 125–31.
14. H. Hagi: Mater. Trans. JIM, 1994, vol. 35, pp. 112–17.10.2320/matertrans1989.35.112 ↗
15. M. Enomoto, D. Hirakami, and T. Tarui: ISIJ Int., 2006, vol. 46, pp. 1381–87.10.2355/isijinternational.46.1381 ↗
16. W.Y. Choo and J.Y. Lee: Metall. Trans. A, 1982, vol. 13A, pp. 135–40.10.1007/BF02642424 ↗
17. S. Taketomi, R. Matsumoto, and N. Miyazaki: Acta Mater., 2008, vol. 56, pp. 3761–69.10.1016/j.actamat.2008.04.011 ↗
18. M. Itakura, M. Yamaguchi, F. Shimizu, S. Ogata, T. Kano, H. Kimizuka, T. Kadoyoshi, and H. Kaburaki: “Annual Report of the Earth Simulator Center, Apr. 2007–Mar. 2008”, The Earth Simulator Center, Yokohama, Tokyo, pp. 233–36.
19. J.P. Hirth: Metall. Trans. A, 1980, vol. 11A, pp. 861–90.10.1007/BF02654700 ↗
20. G.M. Pressouyre and I.M. Bernstein: Metall. Trans. A, 1978, vol. 9A, pp. 1571–80.10.1007/BF02661939 ↗
21. W.A. Counts, C. Wolverton, and R. Gibala: Acta Mater., 2010, vol. 58, pp. 4730–41.10.1016/j.actamat.2010.05.010 ↗
22. C.S. Becquart, J.M. Raulot, G. Bencteuz, C. Domain, M. Perez, S. Garruchet, and H. Nguyen: Comp. Mater. Sci., 2007, vol. 40, pp. 119–29.10.1016/j.commatsci.2006.11.005 ↗
23. D. Kalish and M. Cohen: Mater. Sci. Eng., 1970, vol. 6, pp. 156–66.10.1016/0025-5416(70)90045-5 ↗
24. A.D. Le Claire: Numerical Data and Functional Relationships in Science and Technology, H. Mehrer, ed., Landolt-Börnstein, Berlin, New Series, 1990, vol. 26, pp. 480–81.
25. A.W. Cockhardt, G. Schoek, and H. Wiedersich: Acta Metall., 1955, vol. 3, pp. 533–37.10.1016/0001-6160(55)90111-5 ↗
26. E. Clouet, S. Garruchet, H. Nguyen, M. Perez, and C.S. Becquart: Acta Mater., 2008, vol. 56, pp. 3450–60.10.1016/j.actamat.2008.03.024 ↗
27. S. Takeuchi, E. Furubayashi, and T. Taoka: Acta Metall., 1967, vol. 15, pp. 1179–91.10.1016/0001-6160(67)90392-6 ↗
28. G.R. Speich: Trans. TMS-AIME, 1969, vol. 245, pp. 2553–64.
29. D.P. Koistinen and R.E. Marburger: Acta Metall., 1959, vol. 7, pp. 59–60.10.1016/0001-6160(59)90170-1 ↗
30. I. Maroef, D.L. Olson, M. Eberhart, and G.R. Edwards: Int. Mater. Rev., 2002, vol. 47, pp. 191–223.10.1179/095066002225006548 ↗
31. S.M. Myers, D.M. Follstaedt, F. Besenbacher, and J. Bøttiger: J. Appl. Phys., 1982, vol. 53, pp. 8734–44.10.1063/1.330473 ↗
32. K. Ono and M. Meshii: Acta Metall. Mater., 1992, vol. 40, pp. 1357–64.10.1016/0956-7151(92)90436-I ↗
33. D. McLean: Grain Boundaries in Metals, Clarendon Press, Oxford, United Kingdom, 1957, pp. 116–40.
34. E.D. Hondros: in Precipitation Processes in Solids, K.C. Russell and H.I. Aaronson, eds., AIME, Warrendale, PA, 1978, pp. 1–30.