Martensite Formation in Conventional and Isothermal Tension of 304 Austenitic Stainless Steel Measured by X-ray Diffraction
Source abstract
Abstract
The temperature above which neither stress nor plastic strain can cause austenite to transform to martensite is determined for 304 austenitic stainless steel by X-ray diffraction measurements on specimens that were previously subjected to isothermal tension tests. The specimens were tested at 273 K, 298 K, 308 K, 333 K, and 373 K (0 °C, 25 °C, 35 °C, 60 °C, and 100 °C). A new isothermal testing technique was used not only for controlling the testing temperature but also for averting deformation-induced heating. Hence, the effect of temperature on the strain-induced martensite is decoupled from that of strain. The diffraction measurements reveal that the martensite volume fraction decreases linearly with the testing temperature up to a critical temperature, which is found by linearly extrapolating to zero martensite volume fraction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. G.B. Olson and M. Cohen, Metall. Trans. A, 1975, vol. 6A, pp 791-795.10.1007/BF02672301 ↗
2. Meyers, M.A. and Chawla, K.K., Mechanical Metallurgy, Prentice-Hall, Englewood Cliffs, NJ, 1984, pp.467-493.
3. Z. Nishiyama, Martensitic Transformation, Academic Press, NY, 1978, pp. 263-292.
4. A.M. Beese, D. Mohr, Exp. Mech., 2011, vol. 51, pp. 667-676.10.1007/s11340-010-9374-y ↗
5. M. Mukherjee, S.B. Singh and O.N. Mohanty, Metall. & Mat’l Trans., 2008, vol. 39A, pp. 2319-2328.10.1007/s11661-008-9599-x ↗
6. Xu, Y., S. H. Zhang, M. Cheng, and H. W. Song: Scripta Mat., 2012, vol. 67, pp. 771-774.10.1016/j.scriptamat.2012.07.021 ↗
7. S.S. Hecker, M.G.. Stout, K.P. Staudhammer and J.L. Smith, Metall. Trans., 1982, vol. 13A, pp. 619-626.10.1007/BF02644427 ↗
8. R.G. Stringfellow, D.M. Parks and G.B. Olson, Acta Metall. & Mater., 1992, vol. 40A, pp. 1703-1716.10.1016/0956-7151(92)90114-T ↗
9. E.S. Perdahcıoglu and H.J.M. Geijselaers, Acta Mat., 2012, vol. 60, pp. 4409-4419.10.1016/j.actamat.2012.04.042 ↗
10. M.-G. Lee, S.-J. Kim, and H.-N. Han: Int. J. Plast., 2010, vol. 26, pp. 688–710.10.1016/j.ijplas.2009.10.001 ↗
11. L.-E. Lindgren, M. Olsson and P. Carlsson, Int’l J. Plast., 2010, vol. 26, pp. 1576-1590.10.1016/j.ijplas.2010.01.012 ↗
12. Y. Tomita and T. Iwamoto, Int’l. J. Mech. Sci., 1995, vol. 37, pp. 1295-1305.10.1016/0020-7403(95)00039-Z ↗
13. G.L. Huang, D.K. Matlock, and G. Krauss: Metall. Trans. A, 1989, vol. 20A, pp. 1239-1246.10.1007/BF02647406 ↗
14. H.C. Shin, T.K. Kwon Ha, and Y.W. Chang: Scripta Mater., 2001, vol. 45, pp. 823–829.10.1016/S1359-6462(01)01101-0 ↗
15. G.W. Cullen and Y.P. Korkolis, Int’l J. Solids & Struct, 2013, vol. 50, pp. 1621-1633.10.1016/j.ijsolstr.2013.01.020 ↗
16. A.K. De, D.C. Murdock, M.C. Mataya, J.G. Speer, and D.K. Matlock, Scripta Mat., 2004, vol. 50, pp. 1445-1449.10.1016/j.scriptamat.2004.03.011 ↗
17. K. Tsuzaki, T. Maki, and I. Tamura: J. Phys., 1982, vol. 43, pp. C4-423–C4-428.10.1051/jphyscol:1982464 ↗
18. W.S. Farren and G.I. Taylor, Proc. Royal Soc. London, 1925, vol. A107, pp. 422-451.10.1098/rspa.1925.0034 ↗
19. G.W. Cullen and Y.P Korkolis, University of New Hampshire, unpublished research, 2013.
20. K.S. Raghavan and R.H. Wagoner: Metall. Trans. A, 1987, vol. 18A, pp. 2143-2150.10.1007/BF02647086 ↗
21. B. Petit, N. Gey, M. Cherkaoui, B. Bolle, and M. Humbert, Int’l J. Plast., 2007, vol. 23, pp. 323-341.10.1016/j.ijplas.2006.07.002 ↗
22. K.S. Raghavan: AK Steel, unpublished research, 2013.
23. A.D. Krawitz: Introduction to Diffraction in Materials Science and Engineering, John Wiley, New York, 2001, pp. 128–43, 151–78, 240–60.
24. R.E. Smallmann and A.H.W. Ngan: Physical Metallurgy and Advanced Materials, 7th ed., Butterworth Heinemann, Amsterdam, 2007, pp. 414–20.
25. B. Fultz, and J.M. Howe, Transmission Electron Microscopy and Diffractometry of Materials, third ed., Springer, Berlin, 2008, pp. 119-266.