journal article·2010-07

Feeding Mechanisms in High-Pressure Die Castings

S. Otarawanna, H.I. Laukli, C.M. Gourlay, A.K. Dahle

Publisher page

Abstract

This work focuses on understanding the feeding behavior during high-pressure die casting (HPDC). The effects of intensification pressure (IP) and gate thickness on the transport of material through the gate during the latter stages of HPDC were investigated using an Al-Si3MgMn alloy. Microstructural characterization of the gate region indicated a marked change in feeding mechanism with increasing IP and gate size. Castings produced with a high IP or thick gate contained a relatively low fraction of total porosity, and shear band-like features existed through the gate, suggesting that semisolid strain localization in the gate is involved in feeding during the pressure intensification stage. When a low IP is combined with a thin gate, no shear band is observed in the gate and feeding is less effective, resulting in a higher level of porosity in the HPDC component. Although shear banding through the gate was found to reduce porosity in HPDC parts, if gates are not properly designed, deformation of the mushy zone through the gate can cause severe macrosegregation, large pores, and large cracks, which could severely reduce the performance of the component.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. M. Ward: Gating Manual, North American Die Casting Association, Wheeling, IL, 2006, pp. 11–37.
2. C.-H. Kim and T.H. Kwon: Mater. Manuf. Processes, 2001, vol. 16 (6), pp. 789–801.10.1081/AMP-100108699 ↗
3. X.P. Niu, K.K. Tong, B.H. Hu, and I. Pinwill: Int. J. Cast Met. Res., 1998, vol. 11, pp. 105–12.10.1080/13640461.1998.11819264 ↗
4. D.R. Gunasegaram, B.R. Finnin, and F.B. Polivka: Mater. Sci. Technol., 2007, vol. 23 (7), pp. 847–56.10.1179/174328407X176992 ↗
5. E.J. Vinarcik: High Integrity Die Casting Processes, John Wiley & Sons, New York, NY, 2003, p. 32.
6. A. Kay, A. Wollenburg, J. Brevick, C. Mobley, and J. Wronowicz: Trans. 17th Int. Die Casting Congr. & Expo., Minneapolis, MN, North American Die Casting Association, Wheeling, IL, 1997, paper T97-094.
7. R. Karban, Jr.: Trans. 21st Int. Die Casting Congr. & Expo., Cincinnatic, OH, North American Die Casting Association, Wheeling, IL, 2001, pp. 210–21.
8. G. Savage, M. Gershenzon, and K.J. Rogers: Trans. 21st Int. Die Casting Congr. & Expo., Cincinnatic, OH, North American Die Casting Association, Wheeling, IL, 2001, pp. 151–55.
9. M.S. Dargusch, G. Wang, N. Schauer, C.M. Dinnis, and G. Savage: Int. J. Cast Met. Res., 2005, vol. 18 (1), pp. 47–53.10.1179/136404605225022784 ↗
10. M.S. Dargusch, G. Dour, N. Schauer, C.M. Dinnis, and G. Savage: J. Mater. Process. Technol., 2006. vol. 180, pp. 37–43.10.1016/j.jmatprotec.2006.05.001 ↗
11. F. Cosse, J.J. Perrier, J.S. Iversen, and S. Brusethaug (Pechiney Aluminium, and Norsk Hydro AS): High Ductility Aluminum Alloy for Die Casting, France, 2003, Patent No. WO03006698.
12. C.M. Gourlay and A.K. Dahle: Nature, 2007, vol. 445, pp. 70–73.10.1038/nature05426 ↗
13. S. Otarawanna, C.M. Gourlay, H.I. Laukli, and A.K. Dahle: Mater. Charact., 2009, vol. 60 (12), pp. 1432–41.10.1016/j.matchar.2009.06.016 ↗
14. L. Arnberg, L. Bäckerud, and G. Chai: Solidification Characteristics of Aluminium Alloys: Volume 2 Foundry Alloys, American Foundrymen’s Society, Inc., Des Plaines, IL, 1996, pp. 13–24.
15. S. Sannes and H. Westengen: Proc. Int. Conf. Magnesium Alloys and Their Applications, Frankfurt, Germany, B.L. Mordike and K.U. Kainer, eds., Werkstoff Informationsgesellschaft, Frankfurt, Germany, 1998, pp. 223–28.
16. A.K. Dahle and D.H. StJohn: Acta Mater., 1999, vol. 47 (1), pp. 31–41.10.1016/S1359-6454(98)00342-5 ↗
17. P.D.D. Rodrigo and V. Ahuja: Proc. 2nd Israeli Conf. on Magnesium Sci. Technol., Dead Sea, Israel, E. Aghion and D. Eliezer, eds., Magnesium Research Institute, Dead Sea, Israel, 2000, pp. 97–104.
18. A.L. Bowles, J.R. Griffiths, and C.J. Davidson: Magnesium Technology 2001, New Orleans, LA, J. Hyrn, ed., TMS, Warrendale, PA, 2001, pp. 161–68.10.1002/9781118805497.ch29 ↗
19. C. Pitsaris, T. Abbott, and C.J. Davidson: Proc. 1st Int. Light Metals Technology Conf., Brisbane, Australia, A.K. Dahle, ed., CAST CRC, Brisbane, Australia, 2003, pp. 223–26.
20. H. Cao and M. Wessén: Int. J. Cast Met. Res., 2005, vol. 18 (6), pp. 377–84.10.1179/136404605225023216 ↗
21. H.I. Laukli, C.M. Gourlay, A.K. Dahle, and O. Lohne: Mater. Sci. Eng. A, 2005, vols. 413–414, pp. 92–97.10.1016/j.msea.2005.08.194 ↗
22. Z. Fan, G. Liu, and Y. Wang: J. Mater. Sci., 2006, vol. 41, pp. 3631–44.10.1007/s10853-006-6248-x ↗
23. C.M. Gourlay, H.I. Laukli, and A.K. Dahle: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1833–44.10.1007/s11661-007-9243-1 ↗
24. S. Otarawanna, C.M. Gourlay, H.I. Laukli, and A.K. Dahle: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1645–59.10.1007/s11661-009-9841-1 ↗
25. A. Hamasaiid, G. Dour, M.S. Dargusch, T. Loulou, C. Davidson, and G. Savage: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 853–64.10.1007/s11661-007-9452-7 ↗
26. C.M. Gourlay, H.I. Laukli, and A.K. Dahle: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2881–91.10.1007/s11661-004-0236-z ↗
27. V. Laxmanan and M.C. Flemings: Metall. Trans. A, 1980, vol. 11A, pp. 1927–37.10.1007/BF02655112 ↗
28. E. Tzimas and A. Zavaliangos: Acta Mater., 1999, vol. 47 (2), pp. 517–28.10.1016/S1359-6454(98)00356-5 ↗
29. E.R. De Freitas and M. Ferrante: Acta Mater., 2001, vol. 49 (18), pp. 3839–47.10.1016/S1359-6454(01)00239-7 ↗
30. S. Vernède, P. Jarry, and M. Rappaz: Acta Mater., 2006, vol. 54 (15), pp. 4023–34.10.1016/j.actamat.2006.04.035 ↗
31. A.B. Phillion, J.L. Desbiolles, and M. Rappaz: Modeling of Casting, Welding and Advanced Solidification Processes—XII, Vancouver, Canada, S. Cockcroft and D. Maijer, eds., TMS, Warrendale, PA, 2009, pp. 353–60.
32. C.M. Gourlay, B. Meylan, and A.K. Dahle: Acta Mater., 2008, vol. 56, pp. 3403–13.10.1016/j.actamat.2008.03.020 ↗
33. T. Sumitomo, D.H. StJohn, and T. Steinberg: Mater. Sci. Eng. A, 2000, vol. 289 (1–2), pp. 18–29.10.1016/S0921-5093(00)00936-9 ↗
34. A.K. Dahle, S. Instone, and T. Sumitomo: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 105–13.10.1007/s11661-003-0212-z ↗
35. Z.W. Chen: Mater. Sci. Eng. A, 2003, vol. 348 (1–2), pp. 145–53.10.1016/S0921-5093(02)00747-5 ↗
36. S.A. Metz and M.C. Flemings: AFS Trans., 1969, vol. 77, pp. 329–34.
37. D.B. Spencer, R. Mehrabian, and M.C. Flemings: Metall. Trans., 1972, vol. 3, pp. 1925–32.10.1007/BF02642580 ↗
38. A.K. Dahle and L. Arnberg: Acta Mater., 1997, vol. 45 (2), pp. 547–59.10.1016/S1359-6454(96)00203-0 ↗
39. M.C. Flemings: Metall. Trans. A, 1991, vol. 22A, pp. 957–76.10.1007/BF02661090 ↗
40. H.V. Atkinson: Prog. Mater. Sci., 2005, vol. 50, pp. 341–412.10.1016/j.pmatsci.2004.04.003 ↗
41. P.K. Seo, D.U. Kim, and C.G. Kang: Mater. Sci. Eng. A, 2007, vol. 445, pp. 20–30.10.1016/j.msea.2006.06.133 ↗