journal article·2014-10

Microstructural Evolution During Normal/Abnormal Grain Growth in Austenitic Stainless Steel

Mohammad Shirdel, Hamed Mirzadeh, Mohammad Habibi Parsa

Publisher page

Abstract

The grain growth behavior of 304L stainless steel was studied in a wide range of annealing temperatures and times with emphasis on the distinction between normal and abnormal grain growth (AGG) modes. The dependence of AGG (secondary recrystallization) at homologous temperatures of around 0.7 upon microstructural features such as dispersed carbides, which were rich in Ti but were almost free of V, was investigated by optical micrographs, X-ray diffraction patterns, scanning electron microscopy images, and energy dispersive X-ray analysis spectra. The bimodality in grain-size distribution histograms signified that a transition in grain growth mode from normal to abnormal was occurred at homologous temperatures of around 0.7 due to the dissolution/coarsening of carbides. Continued annealing to a long time led to completion of secondary recrystallization and the subsequent reappearance of normal growth mode. Another noticeable abnormality in grain growth was observed at very high annealing temperatures, which may be related to grain boundary faceting/defaceting. Finally, a versatile grain growth map was proposed, which can be used as a practical guide for estimation of the resulting grain size after exposure to high temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. N.R. Baddoo: J. Construct. Steel Res., 2008, vol. 64, pp. 1199–1206.10.1016/j.jcsr.2008.07.011 ↗
2. K.H. Lo, C.H. Shek, and J.K.L. Lai: Mater. Sci. Eng. R, 2009, vol. 65, pp. 39–104.10.1016/j.mser.2009.03.001 ↗
3. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier, Oxford, 2004.
4. D.A. Molodov: Microstructural Design of Advanced Engineering Materials, Wiley, Weinheim, 2013.10.1002/9783527652815 ↗
5. M. Hillert: Acta Metall., 1965, vol. 13, pp. 227–38.10.1016/0001-6160(65)90200-2 ↗
6. J. Mizera, J.W. Wyrzykowski, and K.J. Kurzydłowski: Mater. Sci. Eng. A, 1988, vol. 104, pp. 157–62.10.1016/0025-5416(88)90417-X ↗
7. A.F. Padilha, R.L. Plaut, and P.R. Rios: ISIJ Int., 2003, vol. 43, pp. 135–43.10.2355/isijinternational.43.135 ↗
8. P.R. Rios, and G.S. Fonseca: Scripta Mater., 2004, vol. 50, pp. 71–75.10.1016/j.scriptamat.2003.09.031 ↗
9. D. Chakrabarti, C. Davis, and M. Strangwood: Mater. Charact., 2007, vol. 58, pp. 423–38.10.1016/j.matchar.2006.06.014 ↗
10. V.Y. Novikov: Mater. Lett., 2012, vol. 68, pp. 413–15.10.1016/j.matlet.2011.10.101 ↗
11. B. Verlinden, J. Driver, I. Samajdar, and R.D. Doherty: Thermo-mechanical Processing of Metallic Materials, Elsevier, Oxford, 2007.
12. J.B. Koo, and D.Y. Yoon: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1911–26.10.1007/s11661-001-0004-2 ↗
13. J.S. Choi, and D.Y. Yoon: ISIJ Int., 2001, vol. 41, pp. 478–83.10.2355/isijinternational.41.478 ↗
14. J.C. Hamilton, D.J. Siegel, I. Daruka, and F. Leonard: Phys. Rev. Lett., 2003, vol. 90, p. 24610210.1103/PhysRevLett.90.246102 ↗
15. B.N. Kim, K. Hiraga, and K. Morita: Mater. Trans., 2003, vol. 44, pp. 2239–44.10.2320/matertrans.44.2239 ↗
16. L. Gavard, F. Montheillet, and J. Le Coze: Scripta Mater., 1998, vol. 39, pp. 1095–99.10.1016/S1359-6462(98)00276-0 ↗
17. M. Militzer, A. Giumelli, E.B. Hawbolt, and T.R. Meadowcroft: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3399–3409.10.1007/BF02595433 ↗
18. X. Wang, L. Hu, K. Liu, and Y. Zhang: J. Alloy. Compd., 2012, vol. 527, pp. 193–96.10.1016/j.jallcom.2012.03.006 ↗
19. Z. Huda, and T. Zaharinie: J. Alloy. Compd., 2009, vol. 478, pp. 128–32.10.1016/j.jallcom.2008.11.071 ↗
20. O. Flores, and L. Martinez: J. Mater. Sci., 1997, vol. 32, pp. 5985–91.10.1023/A:1018667111981 ↗
21. P.R. Rios: Acta Mater., 1997, vol. 45, pp. 1785–89.10.1016/S1359-6454(96)00284-4 ↗
22. P.R. Rios, and M.E. Glicksman: Acta Mater., 2006, vol. 54, pp. 5313–21.10.1016/j.actamat.2006.07.010 ↗
23. J.C. Dutra, F. Siciliano, and A.F. Padilha: Mater. Res., 2002, vol. 5, pp. 379–84.10.1590/S1516-14392002000300025 ↗
24. I. Tamura, H. Sekine, T. Tanaka, and C. Ouchi: Thermomechanical Processing of High-Strength Low-Alloy Steels, Butterworth, London, 1988.
25. L.F. Li, and J.P. Celis: Can. Metall. Q., 2003, vol. 42, pp. 365–76.10.1179/cmq.2003.42.3.365 ↗
26. H. Mirzadeh, and A. Najafizadeh: J. Alloy. Compd., 2009, vol. 476, pp. 352–55.10.1016/j.jallcom.2008.08.046 ↗
27. T. Maki, S. Shimooka, M. Umemoto, and I. Tamura: Trans. JIM, 1972, vol. 13, pp. 400–407.10.2320/matertrans1960.13.400 ↗
28. H. Mirzadeh, and A. Najafizadeh: Mater. Charact., 2008, vol. 59, pp. 1650–54.10.1016/j.matchar.2008.03.004 ↗
29. H. Mirzadeh, and A. Najafizadeh: ISIJ Int., 2013, vol. 53, pp. 680–89.10.2355/isijinternational.53.680 ↗
30. G. Petzow: Metallographic Etching, 2nd ed., ASM International, Materials Park, OH, USA, 1999.
31. G.F. Vander Voort, E.P. Manilova, J.R. Michael (2004) Microsc. Microanal., vol. 10, pp. 76–7710.1017/S1431927604883375 ↗
32. Standard Methods for Estimating the Average Grain Size, ASTM E 112-10, ASTM International, West Conshohocken, PA, 2010.
33. R. Abbaschian, L. Abbaschian, and R.E. Reed-Hill: Physical Metallurgy Principles, 4th ed., Cengage Learning, Stamford, CT, 2009.
34. S. Roy, D. Chakrabarti, and G.K. Dey: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 717–28.10.1007/s11661-012-1409-9 ↗
35. D. Chakrabarti, C. Davis, and M. Strangwood: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 717–28.
36. Q. Yu, and Y. Sun: Mater. Sci. Eng. A, 2006, vol. 420, pp. 34–38.10.1016/j.msea.2006.01.027 ↗
37. R. Stasko, H. Adrian, and A. Adrian: Mater. Charact., 2006, vol. 56, pp. 340–347.10.1016/j.matchar.2005.09.012 ↗
38. P.R. Rios: Scripta Mater., 1996, vol. 34, pp. 1185–88.10.1016/1359-6462(95)00641-9 ↗
39. B. Weiss, and R. Stickler: Metall. Trans., 1972, vol. 3, pp. 851–66.10.1007/BF02647659 ↗
40. Q. Sha, and Z. Sun: Mater. Sci. Eng. A, 2009, vol. 523, pp. 77–84.10.1016/j.msea.2009.05.037 ↗
41. H. Mirzadeh, and A. Zomorodian: Met. Mater. Int., 2010, vol. 16, pp. 83–86.10.1007/s12540-010-0083-y ↗