Microstructure Characterization and Creep Behavior of Pb-Free Sn-Rich Solder Alloys: Part II. Creep Behavior of Bulk Solder and Solder/Copper Joints
Source abstract
Abstract
Microstructure plays a critical role in the mechanical behavior of Sn-rich solder alloys. A unified mechanistic understanding of creep in Sn-rich solder alloys, at various microstructural length scales, is missing. Part I of this study focused on microstructure characterization of Sn-rich solder alloys. Part II focuses on the creep behavior of bulk solder alloys and small solder joints comparable in size and geometry to those in electronic packages. Pure Sn, Sn-0.7Cu, Sn-3.5Ag, and Sn-3.9Ag-0.7Cu were used in these studies. At the bulk level, creep appears to be controlled by subgrain formation, whose size is controlled by Ag3Sn orCu6Sn5 particles. At the smaller joint level, where the microstructures are much finer, creep in Ag-containing alloys was controlled by local climb and detachment along Ag3Sn particles. The threshold stress for creep is inversely proportional to the Ag3Sn interparticle spacing. At the joint level, the creep of Sn and Sn-Cu alloys was controlled by viscous flow at grain boundaries at low stress, and transition to dislocation climb at higher stress.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. W.J. Plumbridge, C.R. Gagg, S. Peters: J. Electron. Mater., 2001, vol. 30, pp. 1178–8310.1007/s11664-001-0147-3 ↗
2. J. Glazer: Int. Mater. Rev., 1995, vol. 40, pp. 65–9310.1179/imr.1995.40.2.65 ↗
3. J.W. Jang, A.P. De Silva, T.Y. Lee, J.K. Lee, D.R. Frear: Appl. Phys. Lett., 2001, vol. 79, pp. 482–8410.1063/1.1388160 ↗
4. S.K. Kang, A.K. Sarkhel: JEM, 1994, vol. 23, pp. 701–0710.1007/BF02651362 ↗
5. K.J. Puttlitz, K.A. Stalter: Handbook of Lead-Free Solder Technology for Microelectronic Assemblies, Marcel Dekker Inc., New York, NY, 200410.1201/9780203021484 ↗
6. R.S. Sidhu and N. Chawla: Metall. Mater. Trans. A, 2007, vol. 38A. doi: 10.1007/s11661-007-9414-010.1007/s11661-007-9414-0 ↗
7. F. Ochoa, X. Deng, N. Chawla: J. Electron. Mater., 2004, vol. 33, pp. 1596–60710.1007/s11664-004-0103-0 ↗
8. C.M.L. Wu, M.L. Huang: J. Electron. Mater. 2002, vol. 31, pp. 442–4810.1007/s11664-002-0098-3 ↗
9. M.D. Mathew, H. Yang, S. Movva, K.L. Murty: Metall. Mater. Trans. A, 2005, vol. 36, pp. 99–10510.1007/s11661-005-0142-z ↗
10. H. Mavoori, J. Chin, S. Vaynman, B. Morgan, L. Keer, M. Fine: J. Electron. Mater., 1997, vol. 26, pp. 783–9010.1007/s11664-997-0252-z ↗
11. K. Wu, N. Wade, J. Cui, K. Miyahara: J. Electron. Mater., 2003, vol. 32, pp. 5–810.1007/s11664-003-0245-5 ↗
12. R.J. McCabe, M.E. Fine: Metall. Mater. Trans. A, 2002, vol. 33, pp. 1531–3910.1007/s11661-002-0075-8 ↗
13. P.T. Vianco, J.A. Rejent, A.C. Kilgo: J. Electron. Mater., 2004, vol. 33, pp. 1389–140010.1007/s11664-004-0169-8 ↗
14. P.T. Vianco, J.A. Rejent, A.C Kilgo: J. Electron. Mater., 2004, vol. 33, pp. 1473–8410.1007/s11664-004-0089-7 ↗
15. Q. Xiao, W.D. Armstrong: J. Electron. Mater., 2005, vol. 34, pp. 196–21110.1007/s11664-005-0233-z ↗
16. N. Wade, K. Wu, J. Kunii, S. Yamada, K. Miyahara: J. Electron. Mater., 2001, vol. 30, pp. 1228–3110.1007/s11664-001-0154-4 ↗
17. D.K. Joo, J. Yu, S.W. Shin: J. Electron. Mater., 2003, vol. 32, pp. 541–4710.1007/s11664-003-0140-0 ↗
18. M.M. El-Bahay, M.E. El Mossalamy, M. Mahdy, and A.A. Bahgat: J. Mater. Sci.-Mater. Electron., 2004, vol. 15, pp. 519–2610.1023/B:JMSE.0000032586.62418.6c ↗
19. Y. Kariya, T. Asai, and T. Suga: Proc. SPIE, 2004, vol. 5852, pp. 297–30110.1117/12.621538 ↗
20. C.H. Raeder, G.D. Schmeelk, D. Mitlin, T. Barbieri, W. Yang, L.F. Felton, R.W. Messler, D.B. Knorr, and D. Lee: IEEE CPMT Int. Electronic Manufacturing Technology Symp., pp. 1–6
21. M. Kerr, N. Chawla: JOM, 2004, vol. 56, pp. 50–5410.1007/s11837-004-0112-8 ↗
22. H. Rhee, F. Guo, J.G. Lee, K.C. Chen, K.N. Subramanian: J. Electron. Mater., 2003, vol. 32, pp. 1257–6410.1007/s11664-003-0020-7 ↗
23. S.G. Jadhav, T.R. Bieler, K.N. Subramanian, J.P. Lucas: J. Electron. Mater., 2001, vol. 30, pp. 1197–120510.1007/s11664-001-0150-8 ↗
24. J.H. Lau, S.H. Pan, C. Chang: J. Electron. Packaging, 2002, vol. 124, pp. 69–7610.1115/1.1400995 ↗
25. H.G. Song, J.W. Morris Jr., F. Hua: JOM, 2002, vol. 56, pp. 30–3210.1007/BF02701846 ↗
26. S.W. Shin, J. Yu: J. Electron. Mater., 2005, vol. 34, pp. 188–9510.1007/s11664-005-0232-0 ↗
27. R. Darveaux, K. Banerji: IEEE Trans. Compon. Hybr., 1992, vol. 15, pp. 1013–2410.1109/33.206925 ↗
28. S. Wiese, K.J. Wolter: Microeletron. Rel., 2004, vol. 44, pp. 1923–3110.1016/j.microrel.2004.04.016 ↗
29. Z. Chen, Y. Shi, Z. Xia: J. Electron. Mater., 2004, vol. 33, pp. 964–7110.1007/s11664-004-0023-z ↗
30. F. Guo, S. Choi, J.P. Lucas, K.N. Subramanian: J. Electron. Mater., 2000, vol. 29, pp. 1241–4810.1007/s11664-000-0019-2 ↗
31. MTS Systems Corp., http://www.mts.com
32. M. Kerr, N. Chawla: Acta Mater., 2004, vol. 52, pp. 4527–3510.1016/j.actamat.2004.06.010 ↗
33. F. Garofalo: Fundamentals of Creep and Creep-Rupture in Metals, Macmillan, New York, NY, 1965, pp. 66–69
34. R.W. Evans, B. Wilshire: Introduction to Creep, The Institute of Materials, London, 1993, p. 46
35. A.K. Mukherjee, J.E. Bird, J.E. Dorn: Trans. ASM, 1969, vol. 62, pp. 155–69
36. F.A. Mohamed, K.L. Murty, J.W. Morris Jr.: Metall. Trans., 1973, vol. 4, pp. 935–4010.1007/BF02645593 ↗
37. S. Suh, J.B. Cohen, J. Weertmen: Metall. Trans. A, 1983, vol. 14A, pp. 117–2610.1007/BF02643744 ↗
38. J.E. Breen, J. Weertman: Trans. AIME, 1955, vol. 203, pp. 1230–34
39. E. Arzt, J. Rosler: Acta. Metall. Mater., 1988, vol. 36, pp. 1053–6010.1016/0001-6160(88)90159-9 ↗
40. O.D. Sherby, R.H. Klundt, A.K. Miller: Metall. Trans. A, 1977, vol. 8A, pp. 843–5010.1007/BF02661565 ↗
41. J. Lin, O.D. Sherby: Res. Mechanica, 1981, vol. 2, pp. 251–93
42. O.D. Sherby, E.M. Taleff: Mater. Sci. Eng. A, 2002, vol. 322, pp. 89–9910.1016/S0921-5093(01)01121-2 ↗
43. S.L. Robinson, O.D. Sherby: Acta Metall., 1969, vol. 17, pp. 109–2510.1016/0001-6160(69)90132-1 ↗
44. I.S. Servi, N.J. Grant: Trans. AIME, 1951, vol. 191, p. 917
45. J.L. Lytton, C.R. Barrett, O.D. Sherby: Trans. TMS-AIME, 1965, vol. 233, p. 1399
46. R.S. Mishra, A.B. Pandey: Metall. Trans. A, 1990, vol. 21A, pp. 2089–9010.1007/BF02647258 ↗
47. W.A. Wood and G.R. Wilms: J. Inst. Met., 1948–49, vol. 75, p. 613
48. J. Weertman: in Rate Process in Plastic Deformation of Materials, J.C.M. Li and A.K. Mukherjee, eds., ASM, Metals Park, OH, 1975, p. 315
49. R. Lagneborg, B. Bergman: Met. Sci., 1976, vol. 10, pp. 20–2810.1179/030634576790431462 ↗
50. H.E. Cline, T.H. Alden: Trans. AIME, 1967, vol. 239, pp. 710–14
51. G. Malakondaiah, P.R. Rao: Met. Sci., 1981, vol. 15, pp. 442–4610.1179/msc.1981.15.10.442 ↗
52. B. Wilshire, C.J. Palmer: Scripta Mater., 2002, vol. 46, pp. 483–8810.1016/S1359-6462(01)01247-7 ↗
53. S.V. Raj: Mater. Sci. Eng., 1987, vol. 96, pp. 57–6410.1016/0025-5416(87)90540-4 ↗
54. G. Malakondaiah, P.R. Rao: Acta Metall., 1981, vol. 29, pp. 1263–7510.1016/0001-6160(81)90017-1 ↗
55. W.L. Bradley, J.S. August, D.K. Matlock: Met. Sci., 1977, vol. 11, pp. 168–7010.1179/msc.1977.11.5.168 ↗
56. Z.A. Yang, Z.G. Wang, S.Q. Wang: Mater. Sci. Eng. A, 1988, vol. 102, pp. 17–2310.1016/0025-5416(88)90528-9 ↗
57. H. Luthy, A.K. Miller, O.D. Sherby: Acta Metall., 1980, vol. 28, pp. 169–7810.1016/0001-6160(80)90066-8 ↗
58. O.D. Sherby, P.M. Burke: Prog. Mater. Sci., 1967, vol. 1, p. 325
59. O.A. Ruano, A.K. Miller, O.D. Sherby: Mater. Sci. Eng., 1981, vol. 51, pp. 9–1610.1016/0025-5416(81)90100-2 ↗
60. J. Cadek: Mater. Sci. Eng., 1987, vol. 94, pp. 79–9210.1016/0025-5416(87)90324-7 ↗
61. J. Cadek, K. Milicka: Scripta. Mater., 1997, vol. 37, pp. 1039–4410.1016/S1359-6462(97)00216-9 ↗
62. S. Spigarelli, E. Cerri, P. Bianchi, E. Evangelista: Mater. Sci. Technol., 1999, vol. 15, pp. 1433–4010.1179/026708399101505428 ↗
63. S. Wiese, F. Feustel, E. Meusel: Sens. Actuators A-Phys., 2002, vol. 99, pp. 188–9310.1016/S0924-4247(01)00880-9 ↗
64. E. Orowan: in Dislocations in Metals, M. Cohen, ed., AIME, New York, NY, 1954, p. 131
65. U.F. Kocks: Phil. Mag., 1966, vol. 13, pp. 541–6610.1080/14786436608212647 ↗
66. R.S. Mishra, T.K. Nandy, G.W. Greenwood: Phil. Mag. A, 1994, vol. 69, pp. 1097–10910.1080/01418619408242241 ↗
67. R.S.W. Shewfelt, L.M. Brown: Phil. Mag., 1977, vol. 35, pp. 945–6210.1080/14786437708232636 ↗
68. E. Arzt, M.F. Ashby: Scripta Metall., 1982, vol. 16, pp. 1285–9010.1016/0036-9748(82)90484-7 ↗
69. J. Rosler, E. Arzt: Acta Metall. Mater., 1990, vol. 38, pp. 671–8310.1016/0956-7151(90)90223-4 ↗
70. V.C. Nardone, J.K. Tien: Scripta Mater., 1983, vol. 17, pp. 467–7010.1016/0036-9748(83)90333-2 ↗
71. J.H. Schroder, E. Arzt: Scripta Mater., 1985, vol. 19, pp. 1129–3410.1016/0036-9748(85)90022-5 ↗
72. D. Srolovitz, M.J. Luton, R. Petkovic-Luton, D.M. Barnett, W.D. Nix: Acta Metall., 1984, vol. 32, pp. 1079–8810.1016/0001-6160(84)90011-7 ↗
73. E. Arzt, D. Wilkinson: Acta Metall., 1986, vol. 34, 1893–9810.1016/0001-6160(86)90247-6 ↗
74. J. Rosler, E. Arzt: Acta Metall. Mater., 1988, vol. 36, pp. 1043–5110.1016/0001-6160(88)90158-7 ↗
75. F.W. Crossman, M.F. Ashby: Acta Metall., 1975, vol. 23, pp. 425–4010.1016/0001-6160(75)90082-6 ↗