Dissimilar Laser Welding/Brazing of 5754 Aluminum Alloy to DP 980 Steel: Mechanical Properties and Interfacial Microstructure
Source abstract
Abstract
A diode laser welding/brazing technique was used for lap joining of 5754 aluminum alloy to DP 980 steel with Al-Si filler metal. The correlation between joint interfacial microstructure, wettability of filler metal, and mechanical properties was systematically investigated. At low laser power (1.4 kW), a layer of intermetallic compounds, composed of θ-Fe(Al,Si)3 and τ 5 -Al7.2Fe1.8Si, was observed at the interface between fusion zone and steel. Because of the poor wettability of filler metal on the steel substrate, the joint strength was very low and the joint failed at the FZ/steel interface. When medium laser power (2.0 kW) was applied, the wettability of filler metal was enhanced, which improved the joint strength and led to FZ failure. With further increase of laser power to 2.6 kW, apart from θ and τ 5, a new hard and brittle η-Fe2(Al,Si)5 IMC with microcracks was generated at the FZ/steel interface. The formation of η significantly degraded the joint strength. The failure mode changed back to interfacial failure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Intermetallics and Advanced Alloy Properties · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. 1. K.H. Rendigs: Mater. Sci. Forum., 2008, vol. 242, pp. 11-24.10.4028/www.scientific.net/MSF.242.11 ↗
2. 2. G.S. Cole, and A.M. Sherman: Mater. Charact., 1995, vol 35, pp. 3-9.10.1016/1044-5803(95)00063-1 ↗
3. 3. Y. Muraoka, and H. Miyaoka: J. Mater. Process Technol., 1993, vol 38, pp. 655–74.10.1016/0924-0136(93)90042-5 ↗
4. 4. M.J. Rathod and M. Kutsuna: Weld. J., 2004, vol. 83, pp. 16s-23s.
5. 5. M.J. Torkamany, S. Tahamtan, and J. Sabbaghzadeh: Mater. Des., 2010, vol. 31, pp. 458–65.10.1016/j.matdes.2009.05.046 ↗
6. 6. V.X. Tran, and J. Pan: Int. J. Fatigue., 2010, vol. 32, pp. 1167–79.10.1016/j.ijfatigue.2009.12.011 ↗
7. 7. M. Acarer, and B. Demir: Mater. Lett., 2008, vol. 62, pp. 4158–60.10.1016/j.matlet.2008.05.060 ↗
8. 8. M. Kimura, H. Ishii, M. Kusaka, K. Kaizu, and A. Fuji: Sci. Technol. Weld. Join., 2009, vol. 14, pp. 388–95.10.1179/136217109X425856 ↗
9. 9. M. Soltan Ali Nezhad, and A. Haerian Ardakani: Mater. Des., 2009, vol. 30, pp. 1103–09.10.1016/j.matdes.2008.06.042 ↗
10. 10. J.L. Song, S.B. Lin, C.L. Yang, and C.L. Fan: J. Alloys Compounds, 2009, vol. 488, 217–22.10.1016/j.jallcom.2009.08.084 ↗
11. 11. A. Mathieu, S. Pontevicci, J.C. Viala, E. Cicala, S. Matteï, and D. Grevey: Mater. Sci. Eng., A, 2006, vol. 435, pp. 19-28.10.1016/j.msea.2006.07.099 ↗
12. 12. K. Saida, W. Song, and K. Nishimoto: Sci. Technol. Weld. Join., 2005, vol. 10, pp. 227–35.10.1179/174329305X37060 ↗
13. 13. Y. Su, X. Hua, and Y. Wu: J. Mater. Process Technol., 2014, vol. 214, pp. 81-86.10.1016/j.jmatprotec.2013.08.002 ↗
14. 14. H.T. Zhang, J.C. Feng, P. He, and H. Hackl: Mater. Charact., 2007, vol. 58, pp. 588–92.10.1016/j.matchar.2006.07.008 ↗
15. 15. S.B. Lin, J.L. Song, C.L. Yang, and G.C. Ma: Sci. Technol. Weld. Join., 2009, vol. 14, pp. 636–39.10.1179/136217109X12464549883493 ↗
16. 16. H. Dong, L. Yang, C. Dong, and S. Kou: Mater. Sci. Eng., A, 2010, vol. 527, pp. 7151–54.10.1016/j.msea.2010.07.092 ↗
17. 17. A. Mathieu, R. Shabadi, A. Deschamps, M. Suery, S. Matteï, D. Grevey, and E. Cicala: Opt. Laser Technol., 2007, vol. 39, pp. 652–61.10.1016/j.optlastec.2005.08.014 ↗
18. 18. G. Sierra, P. Peyre, F.D. Beaume, D. Stuart, and G. Fras: Sci. Technol. Weld. Join., 2008, vol. 13, pp. 430–37.10.1179/174329308X341852 ↗
19. 19. C. Dharmendra, K.P. Rao, J. Wilden, and S. Reich: Mater. Sci. Eng., A, 2011, vol. 528, pp. 1497–1503.10.1016/j.msea.2010.10.050 ↗
20. 20. S.B. Lin, J.L. Song, C.L. Yang, C.L. Fan, and D.W. Zhang: Mater. Des., 2010, vol. 31, pp. 2637–42.10.1016/j.matdes.2009.12.005 ↗
21. 21. H. Dong, W. Hu, Y. Duan, X. Wang, and C. Dong: J. Mater. Process Technol., 2012, vol. 212, pp. 458–64.10.1016/j.jmatprotec.2011.10.009 ↗
22. 22. Y. Su, X. Hua, and Y. Wu: J. Mater. Process Technol., 2014, vol. 214, pp. 750–55.10.1016/j.jmatprotec.2013.11.022 ↗
23. 23. P. Vaillant, and J.P. Petitet: J. Mater. Sci., 1995, vol. 30, pp. 4659–68.10.1007/BF01153076 ↗
24. 24. M. Roulin, J.W. Luster, G. Karadeniz, and A. Mortensen: Weld. J., 1999, vol. 78, pp. 151s–55s.
25. 25. J.C. Viala, M. Peronnet, F. Barbeau, F. Bosselet, and J. Bouix: Compos. Part A App. Sci. Manuf., 2002, vol. 33, pp. 1417–20.10.1016/S1359-835X(02)00158-6 ↗
26. 26. D. Pierre, F. Barbeau, M. Peronnet, F. Bosselet, and J. C. Viala: Defect Diffus. Forum, 2001, vol. 194, pp. 1593–98.10.4028/www.scientific.net/DDF.194-199.1593 ↗
27. S.H. Chen, J.H. Huang, K. Ma, X.K. Zhao, A. Vivek: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 3064-3073.10.1007/s11661-014-2241-1 ↗
28. 28. D. Bonn, J. Eggers, J. Indekeu, J. Meunier, and E. Rolley: Rev. Mod. Phys., 2009, vol. 81, pp. 739-805.10.1103/RevModPhys.81.739 ↗
29. 29. H. He, C. Yang, S. Lin, C. Fan, Z. Chen, and Z. Chen: Sci. Technol. Weld. Join., 2014, vol. 19, pp. 527-533.10.1179/1362171814Y.0000000220 ↗
30. R. Kovacevic: Welding Processes, InTech, Croatia, 2012, p. 33-54.10.5772/2884 ↗
31. 31. T. Maitra, and S.P. Gupta: Mater. Charact., 2002, vol. 49, pp. 293-311.10.1016/S1044-5803(03)00005-6 ↗
32. 32. Y. Li, and B. Legendre: J. Alloys Compounds, 2000, vol. 302, pp. 187–91.10.1016/S0925-8388(00)00682-4 ↗
33. 33. A.M. Nasiri, L. Li, S.H. Kim, Y. Zhou, D.C. Weckman, and T.C. Nguyen: Weld. J., 2011, vol. 90, pp. 211s-219s.
34. A.M. Nasiri: PhD Dissertation, University of Waterloo, 2013.
35. 35. S.W. Mei, M. Gao, J. Yan, C. Zhang, G. Li, and X.Y. Zeng: Sci. Technol. Weld. Join., 2013, vol. 18, pp. 293-300.10.1179/1362171813Y.0000000106 ↗
36. 36. N. Takata, M. Nishimoto, S. Kobayashi, and M. Takeyama: Intermetallics, 2014, vol. 54, pp. 136-142.10.1016/j.intermet.2014.06.003 ↗
37. 37. W.J. Cheng, and C.J. Wang: Mater. Charact., 2010, vol. 61, pp. 467-473.10.1016/j.matchar.2010.02.001 ↗
38. B.D. Cullity: Elements of X-Ray Diffraction, 2nd ed., Addison-Wesley publishing co, Philippines, 1978, p. 135.
39. B.D. Cullity: Elements of x-ray diffraction, 2nd ed. Addison-Wesley publishing co, Philippines, 1978, p. 512
40. 40. Y.Y. Chang, C.C. Tsaur and J.C. Rock: Surf. Coat. Tech., 2006, vol. 200, pp. 6588-6593.10.1016/j.surfcoat.2005.11.038 ↗