journal article·2017-12Open access

In Situ Neutron Diffraction Study of the Influence of Microstructure on the Mechanical Response of Additively Manufactured 304L Stainless Steel

D. W. Brown, D. P. Adams, L. Balogh, J. S. Carpenter, B. Clausen, G King, B. Reedlunn, T. A. Palmer, M. C. Maguire, S. C. Vogel

Abstract

In situ neutron diffraction measurements were completed during tensile and compressive deformation of stainless steel 304L additively manufactured (AM) using a high power directed energy deposition process. Traditionally produced wrought 304L material was also studied for comparison. The AM material exhibited roughly 200 MPa higher flow stress relative to the wrought material. Crystallite size, crystallographic texture, dislocation density, and lattice strains were all characterized to understand the differences in the macroscopic mechanical behavior. The AM material’s initial dislocation density was about 10 times that of the wrought material, and the flow strength of both materials obeyed the Taylor equation, indicating that the AM material’s increased yield strength was primarily due to greater dislocation density. Also, a ~50 MPa flow strength tension/compression asymmetry was observed in the AM material, and several potential causes were examined.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Nuclear Materials and Properties · Fusion materials and technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. D.D. Gu, W. Meiners, K. Wissenbach, R. Poprawe, Int. Mater. Rev., 2012, vol. 57, pp. 133-164.10.1179/1743280411Y.0000000014 ↗
2. S.A. Davis, J.M. Vitek, T.L. Hebble, Welding Journal, 1987, vol. 66, pp. S289-S300.
3. Z. Wang, T.A. Palmer, A.M. Beese, Acta Mater., 2016, vol. 110, pp. 226-235.10.1016/j.actamat.2016.03.019 ↗
4. B.E. Carroll, T.A. Palmer, A.M. Beese, Acta Mater., 2015, vol. 87, pp. 309-320.10.1016/j.actamat.2014.12.054 ↗
5. P. Akerfeldt, M.-L. Antti, R. Pederson, Mater. Sci. Eng., A, 2016, vol. 674, pp. 428-437.10.1016/j.msea.2016.07.038 ↗
6. E. Nishida, B. Song, M. Maguire, D. Adams, J. Carroll, J. Wise, J. Bishop, T. Palmer: in Dymat 2015—11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, E. Cadoni, ed., 2015.
7. G.T. Gray, III, V. Livescu, P.A. Rigg, C.P. Trujillo, C.M. Cady, S.R. Chen, J.S. Carpenter, T.J. Lienert, S. Fensin: in Dymat 2015—11th International Conference on the Mechanical and Physical Behaviour of Materials Under Dynamic Loading, E. Cadoni, ed., 2015.
8. W.E. King, A.T. Anderson, R.M. Ferencz, N.E. Hodge, C. Kamath, S.A. Khairallah, A.M. Rubenchik: Appl. Phys. Rev., 2015, vol. 2, 04130410.1063/1.4937809 ↗
9. B. Clausen: PhD. Technical University of Denmark, 1997.
10. M. Gharghouri, G. Weatherly, J. Embury, J. Root, Phil. Mag. A, 1999, 7, vol. 79, pp. 1671-169510.1080/01418619908210386 ↗
11. M.R. Daymond, C.N. Tome, M.A.M. Bourke, Acta Mater., 2000, vol. 48(2), pp. 553-564.10.1016/S1359-6454(99)00354-7 ↗
12. L. Balogh, D. Brown, P. Mosbrucker, F. Long, M. Daymond, Acta Mater., 2012, vol. 60(15), pp. 5567-5577.10.1016/j.actamat.2012.06.062 ↗
13. S. Agnew, C. Tome, D. Brown, T. Holden, S. Vogel, Scr. Mater., 2003, vol. 48 (8), pp. 1003-1008.10.1016/S1359-6462(02)00591-2 ↗
14. R. Tandon, T. Wilks, M. Gieseke, C. Noelke, S. Kaierle, T.A. Palmer: Euro Powder Metallurgy Association (EPMA): AM – Special Processes and Materials Reims, Fr, 2015.
15. VAMAS-20, Technical Specification, ISO/TS 21432, 2005
16. M.A.M. Bourke, D.C. Dunand, E. Ustundag, Appl. Phys. A, 2002, vol. A74, pp. S1707-S1709.10.1007/s003390201747 ↗
17. H. Wenk, L. Lutterotti, S. Vogel, Nucl. Instrum. Methods Phys. Res. Sect. A, 2003, vol. 515(3), pp. 575-588.10.1016/j.nima.2003.05.001 ↗
18. D.W. Brown, M.A. Okuniewski, T.A. Sisneros, B. Clausen, G.A. Moore, L. Balogh, J. Nuc. Matl., 2016, vol. 482, pp. 63-74.10.1016/j.jnucmat.2016.09.022 ↗
19. D.W. Brown, M.A.M. Bourke, B. Clausen, D.R. Korzekwa, R.C. Korzekwa, R.J. McCabe, T.A. Sisneros, D.F. Teter, Mater. Sci. Eng., A, 2009, vol. 512, pp. 67-75.10.1016/j.msea.2009.02.004 ↗
20. R.B. Von Dreele, J. App. Crys., 1997, vol. 30, pp. 517-525.10.1107/S0021889897005918 ↗
21. G. Ribarik, J. Gubicza, T. Ungar, Mater. Sci. Eng., A, 2004, vol. 387, pp. 343-347.10.1016/j.msea.2004.01.089 ↗
22. L. Lutterotti, S. Matthies, H.-R. Wenk, A.J. Schultz, J.W. Richardson, J. App. Phys., 1997, vol. 81, pp. 594-600.10.1063/1.364220 ↗
23. H.R. Wenk, L. Lutterotti, S.C. Vogel, Powder Diffr., 2010, vol. 25(3), pp. 283-296.10.1154/1.3479004 ↗
24. Y.S. Touloukian, R.K. Kirby, R.E. Taylor, P.D. Desai, Thermal Expansion: Metallic Elements and Alloys, Plenum Publishing Company, New York, 1975.10.1007/978-1-4757-1622-1 ↗
25. M.R. Daymond, M.A.M. Bourke, R.B. Von Dreele, B. Clausen, T. Lorentzen, J. App. Phys., 1997, vol. 82(4), pp. 1554-1562.10.1063/1.365956 ↗
26. M.R. Daymond, J. App. Phys., 2004, vol. 96(8), pp. 4263-4272.10.1063/1.1794896 ↗
27. I.C. Noyan, J.B. Cohen, Residual Stress-Measurement by Diffraction and Interpretation, Springer-Verlag, New York., 1987.
28. T.M. Holden, J.H. Root, R.A. Holt, M. Hayashi, Physica B, 1995, vol. 213, pp. 793-79610.1016/0921-4526(95)00282-E ↗
29. A.D. Krawitz, T.M. Holden, MRS Bulletin, 1990, vol. 15(11), pp. 57-64.10.1557/S0883769400058371 ↗
30. T.M. Holden, R.A. Holt, G. Dolling, B.M. Powell, J.E. Winegar, Metall. Trans. A, 1988, vol. 19(9), pp. 2207-2214.10.1007/BF02645044 ↗
31. T.M. Holden, R.A. Holt, A.P. Clarke, Mater. Sci. Eng. A, 1998, vol. 246(1-2), pp. 180-198.10.1016/S0921-5093(97)00732-6 ↗
32. A.C. Larson, R.B. Von Dreele, Los Alamos National Lab, Los Alamos, NM, 1986.
33. T. Ungar, J. Gubicza, G. Ribarik, A. Borbely, J. App. Crys., 2001, vol. 34(3), pp. 298-310.10.1107/S0021889801003715 ↗
34. M. Wilkens, Phys. Status Solidi A, 1970, vol. 2(2), pp. 359-370.10.1002/pssa.19700020224 ↗
35. T. Ungár, G. Tichy, J. Gubicza, R.J. Hellmig, Powder Diffr., 2005, vol. 20(4), pp. 366-375.10.1154/1.2135313 ↗
36. H. Hu, Texture, 1974, vol. 1(4), pp. 233-258.10.1155/TSM.1.233 ↗
37. U.F. Kocks, C.N. Tome, H.R. Wenk, Texture and Anisotropy, Cambridge University Press, Cambridge, 1998.
38. C.J. Neil, J.A. Wollmershauser, B. Clausen, C.N. Tome, S.R. Agnew, Int. J. Plas., 2010, vol. 26(12), pp. 1772-1791.10.1016/j.ijplas.2010.03.005 ↗
39. Ledbetter HM (1984) Phys. Stat. Solid A, 85(1): 89-96.10.1002/pssa.2210850111 ↗
40. B. Clausen, T. Lorentzen, M.A.M. Bourke, M.R. Daymond: Mater. Sci. Eng. A, 1999, vol. 259(1):17-24.10.1016/S0921-5093(98)00878-8 ↗
41. J.W. Simmons, Mater. Sci. Eng. A, 1996, vol. 207(2), pp. 159-169.10.1016/0921-5093(95)09991-3 ↗
42. R.P. Reed, Jom-Journal of the Minerals Metals & Materials Society, 1989, vol. 41(3), pp. 16-21.10.1007/BF03220991 ↗
43. G.I. Taylor, J. Inst. Met., 1938, vol. 62, pp. 307-324.
44. E.O. Hall, Proceedings of the Physical Society of London Section B, 1951, vol. 64(381), pp. 747-753.10.1088/0370-1301/64/9/303 ↗
45. N.J. Petch, Journal of the Iron and Steel Institute, 1953, vol. 174(1), pp. 25-28.
46. R.E. Stoller, S.J. Zinkle, J. Nuc. Mater., 2000, vol. 283, pp. 349-352.10.1016/S0022-3115(00)00378-0 ↗
47. MatWeb Material Property Data, http://www.matweb.com, 11-08-16
48. H.J. Frost, M.F. Ashby, Deformation Mechanism Maps, Pergamon Press, Oxford, UK, 1982.
49. A. Cottrell, Phil. Mag. Lett., 2009, vol. 89(1), pp. 19-22.10.1080/09500830802448569 ↗
50. P.G. Partridge, Met. Rev., 1967, vol. 12, pp. 169-194.10.1179/imr.1967.12.1.169 ↗
51. D.W. Brown, I.J. Beyerlein, T.A. Sisneros, B. Clausen, C.N. Tome, Int. J. Plas., 2012, vol. 29, pp. 120-135.10.1016/j.ijplas.2011.08.006 ↗