journal article·2016-06

Optimization of Wear Behavior of Magnesium Alloy AZ91 Hybrid Composites Using Taguchi Experimental Design

B. M. Girish, B. M. Satish, Sadanand Sarapure, Basawaraj

Publisher page

Abstract

In the present paper, the statistical investigation on wear behavior of magnesium alloy (AZ91) hybrid metal matrix composites using Taguchi technique has been reported. The composites were reinforced with SiC and graphite particles of average size 37 μm. The specimens were processed by stir casting route. Dry sliding wear of the hybrid composites were tested on a pin-on-disk tribometer under dry conditions at different normal loads (20, 40, and 60 N), sliding speeds (1.047, 1.57, and 2.09 m/s), and composition (1, 2, and 3 wt pct of each of SiC and graphite). The design of experiments approach using Taguchi technique was employed to statistically analyze the wear behavior of hybrid composites. Signal-to-noise ratio and analysis of variance were used to investigate the influence of the parameters on the wear rate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. R. Ambat, N. N. Aung and W. Zhou: Corrosion Science, 2000, vol.42, pp.1433–1455.10.1016/S0010-938X(99)00143-2 ↗
2. R. Ambat, N. N. Aung and W. Zhou: J. Appl. Electrochem., 2000, vol.30, pp. 865–874.10.1023/A:1004011916609 ↗
3. N. N. Aung and W. Zhou: J. Appl. Electrochem., 2002, vol.32, pp.1397–1401.10.1023/A:1022698916817 ↗
4. A. Bag and W. Zhou: J. Mater. Sci. Lettr., 2001, vol.20, pp.457–459.10.1023/A:1010919017805 ↗
5. W. Huang, B. Hou, Y. Pang and Z. Zhou: Wear, 2006, vol. 260, pp. 1173–1178.10.1016/j.wear.2005.07.023 ↗
6. P.J. Blau and M. Walukas: Tribol. Int., 2000, vol.33, pp. 573–579.10.1016/S0301-679X(00)00108-0 ↗
7. H. Chen and A.T. Alpas: Wear, 2000, vol. 246, pp.106–116.10.1016/S0043-1648(00)00495-6 ↗
8. F.H. Stott: Tribol. Int., 1998, vol.31, pp. 61–71.10.1016/S0301-679X(98)00008-5 ↗
9. L.A. Inman, S.R. Rose and P.K. Datta: Wear, 2006, vol.260, pp. 919–932.10.1016/j.wear.2005.06.008 ↗
10. D.S. Mehta, S.H. Masoodand and W.Q. Song: J. Mater. Process. Technol., 2004, vol.155–156, pp.1526–1531.10.1016/j.jmatprotec.2004.04.247 ↗
11. S. Basavarajappa, G. Chandramohan and J. Paulo: Mater. Design, 2007, vol.28, pp. 1393-1398.10.1016/j.matdes.2006.01.006 ↗
12. Y. Sahin: Mater.Design, 2007, vol.28, pp. 1348-1352.10.1016/j.matdes.2006.01.032 ↗
13. K. Ravindran, R. Manisekar, P. Narayanasamy and N. Narayanasamy: Ceramics International, 2013, 39(2), pp. 1169-1182.10.1016/j.ceramint.2012.07.041 ↗
14. P. Ravindran, K. Manisekar, P. Narayanasamy, N. Selvakumar and R. Narayanasamy: Mater.Design, 2012, vol.39, pp. 42-54.10.1016/j.matdes.2012.02.013 ↗
15. P. Ravindran, K. Manisekar and P. Rathika: Mater.Design, 2013, vol. 45, pp. 561-570.10.1016/j.matdes.2012.09.015 ↗
16. B.M.Girish, B.M.Satish, Sadananda Sarapure, D.R.Somashekar and Basawaraj: Tribology Transactions, 2015, vol 58, pp. 481-489.10.1080/10402004.2014.987858 ↗
17. N. Radhika, R. Subramanian and S. Venkat: Journal of Minerals & Materials Characterization & Engineering, 2011, vol.10, pp. 427–43.
18. B. Stojanovic and M. Babic: 8th International Conference on Tribology, Romania, 2014, pp. 708–15.
19. S.Basavarajappa and G.C.Chandramohan: J Mater Sci Tech, 2005, vol 21, pp. 845-850.
20. Y. Sahin and M.Acilar: Composites A, 2003, vol 34 (8), pp. 709-718.10.1016/S1359-835X(03)00142-8 ↗
21. S.C. Sharma, B. Anand and M. Krishna: Wear, 2000, vol.241, pp. 33–40.10.1016/S0043-1648(00)00349-5 ↗
22. A.K. Mondal and S. Kumar: Wear, 2009, vol.267, pp. 458–466.10.1016/j.wear.2008.12.036 ↗
23. G. Taguchi: Taguchi on Robust Technology Development: Bringing Quality Engineering upstream, ASME press, New York, NY, 1993, pp.1-40.10.1115/1.800288 ↗
24. J. Sudeepan, K.Kumar, T.K.Barman and P.Sahoo: Procedia Materials Science, 2014, vol 5, pp. 41-49.10.1016/j.mspro.2014.07.240 ↗
25. S.K.Biswas and A.Satapathy: Mater. Design, 2009, vol 287, pp. 2841-2853.10.1016/j.matdes.2009.01.018 ↗
26. M.H. Cho, S. Bahadur and A.K.Pogosian: Wear, 2005, vol 258, pp. 1825-1835.10.1016/j.wear.2004.12.017 ↗
27. Y.Sahin: Mater. Design, 2003, vol 24, pp. 95-99.10.1016/S0261-3069(02)00143-7 ↗
28. J. Esteban Fernandez, Rocio Fernandez, R.Vijande and R.Tucho Navarro: Wear, 2003, vol 255, pp. 38-45.10.1016/S0043-1648(03)00103-0 ↗