journal article·2017-10Open access

Characterization of Austenitic Stainless Steels Deformed at Elevated Temperature

Mattias Calmunger, Guocai Chai, Robert Eriksson, Sten Johansson, Johan J. Moverare

Abstract

Abstract Highly alloyed austenitic stainless steels are promising candidates to replace more expensive nickel-based alloys within the energy-producing industry. The present study investigates the deformation mechanisms by microstructural characterization, mechanical properties and stress–strain response of three commercial austenitic stainless steels and two commercial nickel-based alloys using uniaxial tensile tests at elevated temperatures from 673 K (400 $$\circ $$C) up to 973 K (700 $$\circ $$C). The materials showed different ductility at elevated temperatures which increased with increasing nickel content. The dominating deformation mechanism was planar dislocation-driven deformation at elevated temperature. Deformation twinning was also a noticeable active deformation mechanism in the heat-resistant austenitic alloys during tensile deformation at elevated temperatures up to 973 K (700 $$\circ $$C).
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. P. Viklund, A. Hjörnhede, P. Henderson, A. Stålenheim and R. Pettersson, Fuel Process. Technol., 2013, vol. 105, pp. 106-12.10.1016/j.fuproc.2011.06.017 ↗
2. L. Trygg and S. Amiri, Appl. Energy, 2007, vol. 84, pp. 1319-37.10.1016/j.apenergy.2006.09.016 ↗
3. A.K.M. Sadrul Islama and M. Ahiduzzaman, AIP Conf. Proc., 2012, vol. 1440, pp. 23-32.10.1063/1.4704200 ↗
4. R. Viswanathan and W. Bakker, J. Mater. Eng. Perform., 2001, vol. 10, pp. 81-95.10.1361/105994901770345394 ↗
5. J. Pettersson, H. Asteman, J.-E. Svensson and L.-G. Johansson, Oxid. Met., 2005, vol. 64, pp. 23-41.10.1007/s11085-005-5704-3 ↗
6. T. Sourmail, Mater. Sci. Technol., 2001, vol. 17, pp. 1-14.10.1179/026708301101508972 ↗
7. F.B. Pickering, Stainless Steels, 1985, vol. 84, pp. 2-28.
8. V. Vodárek, Mater. Sci. Eng., A, 2011, vol. 528, pp. 4232-38.10.1016/j.msea.2011.02.025 ↗
9. R. D. Doherty, D. A. Hughes, F. J. Humphreys, J. J. Jonas, D. J. Jensen, M. E. Kassner, W. E. King, T. R. McNelley, H. J. McQueen and A. D. Rollett, Mater. Sci. Eng., A, 1997, vol. 238, pp. 219-74.10.1016/S0921-5093(97)00424-3 ↗
10. S.-G. Hong and S.-B. Lee, J. Nucl. Mater., 2005, vol. 340, pp. 307-14.10.1016/j.jnucmat.2004.12.012 ↗
11. S. L. Mannan, K. G. Samuel and P. Rodriguez, Mater. Sci. Eng., 1985, vol. 68, pp. 143-9.10.1016/0025-5416(85)90403-3 ↗
12. G. R. Stewart and J. J. Jonas, IISIJ Int., 2004, vol. 44, pp. 1263-72.10.2355/isijinternational.44.1263 ↗
13. I. Nikulin and R. Kaibyshev, Mater. Sci. Eng., A, 2011, vol. 528, pp. 1340-47.10.1016/j.msea.2010.10.056 ↗
14. L. H. de Almeida, P. R. O. Emygdio and I. Le May, Scr. Metall. Mater., 1994, vol. 31, pp. 505-10.10.1016/0956-716X(94)90134-1 ↗
15. L. H. de Almeida, I. Le May and P. R. O. Emygdio, Mater. Charact., 1998, vol. 41:4, pp. 137-50.10.1016/S1044-5803(98)00031-X ↗
16. W. Karlsen, M. Ivanchenko, U. Ehrnstén, Y. Yagodzinskyy and H. Hänninen, J. Nucl. Mater., 2009, vol. 359, pp. 156-61.10.1016/j.jnucmat.2009.10.047 ↗
17. M. Hörnqvist and B. Karlsson, Mater. Sci. Technol., 2006, vol. 22, pp. 213-22.10.1179/174328406X74284 ↗
18. A. Van Den Beukel, Acta Metall., 1980, vol. 28, pp. 965-69.10.1016/0001-6160(80)90114-5 ↗
19. R. A. Mulford and U. F. Kocks, Acta Metall., 1979, vol. 27, pp. 1125-34.10.1016/0001-6160(79)90130-5 ↗
20. G. V. P. Reddy, R. Sandhya, M. Valsan and K. B. S. Rao, Mater. Sci. Technol., 2010, vol. 26, pp. 1384-92.10.1179/174328408X317110 ↗
21. G. V. P. Reddy, R. Sandhya, K. B. S. Rao and S. Sankaran, Procedia Eng., 2010, vol. 2, pp. 2181-88.10.1016/j.proeng.2010.03.234 ↗
22. M. C. Cai, L. S. Niu, T. Yu, H. J. Shi and X. F. Ma, Mater. Sci. Eng., A, 2010, vol. 527, pp. 5175-80.10.1016/j.msea.2010.05.001 ↗
23. M. Ivanchenko, PhD-thesis, Dynamic Strain Aging of Austenitic Stainless Steels and Ni-Base Alloys, Aalto University, 2010.
24. M. A. Meyers, O. Vhringer and V. A. Lubarda, Acta Mater., 2001, vol. 49, pp. 4025-39.10.1016/S1359-6454(01)00300-7 ↗
25. G. Chai, M. Boström, M. Olaison and U. Forsberga, Procedia Eng., 2013, vol. 55, pp. 232-39.10.1016/j.proeng.2013.03.248 ↗
26. M. Lundberg, J. Saarimäki, J. J. Moverare and M. Calmunger, Mater. Charact., 2017, vol. 124, pp. 215-22.10.1016/j.matchar.2017.01.003 ↗
27. I. Gutierrez-Urrutia, S. Zaefferer and D. Raabe, Scr. Mater., 2009, vol. 61, pp. 737-40.10.1016/j.scriptamat.2009.06.018 ↗
28. S. Johansson, J. Moverare and R. Peng, Pract Metallogr, 2013, vol. 50, pp. 810-20.10.3139/147.110272 ↗
29. J. W. Simmons, Mater. Sci. Eng., A, 1996, vol. 207, pp. 159-69.10.1016/0921-5093(95)09991-3 ↗
30. J. Lu, L. Hultman, E. Holmström, K. H. Antonsson, M. Grehk, W. Li, L. Vitos and A. Golpayegani, Acta Mater., 2016, vol. 111, pp. 39-46.10.1016/j.actamat.2016.03.042 ↗
31. , J. R. Davis, Stainless Steels, 1994, ASM International
32. G. G. Yapici, I. Karaman, Z. P. Luo, H. J. Maier and Y. I. Chumlyakov, J. Mater. Res., 2004, vol. 19, pp. 2268-78.10.1557/JMR.2004.0289 ↗
33. S. Lu, Q.-M. Hub, B. Johansson and L. Vitos, Acta Mater., 2011, vol. 59, pp. 5728-34.10.1016/j.actamat.2011.05.049 ↗
34. S. Curtze, V.-T. Kuokkala, A. Oikari, J. Talonen and H. Hänninen, Acta Mater., 2011, vol. 59, pp. 1068-76.10.1016/j.actamat.2010.10.037 ↗
35. S. Curtze and V.-T. Kuokkala, Acta Mater., 2010, vol. 58, pp. 5129-41.10.1016/j.actamat.2010.05.049 ↗
36. X. Feaugas and C. Gaudin, Mater. Sci. Eng., A, 2001, vol. 309-301, pp. 382-85.10.1016/S0921-5093(00)01730-5 ↗
37. D. M. Symons, Metall. Mater. Trans. A, 1997, vol. 28, pp. 655-63.10.1007/s11661-997-0051-4 ↗
38. X. Wu, X. Pan, J. C. Mabon, M. Li and James F. Stubbins, J. Nucl. Mater., 2006, vol. 356, pp. 70-77.10.1016/j.jnucmat.2006.05.047 ↗
39. R. L. Peng, M. Odén, Y. D. Wang and S. Johansson, Mater. Sci. Eng., A, 2002, vol. 334, pp. 215-22.10.1016/S0921-5093(01)01799-3 ↗
40. L. Xiong, Z. S. You and L. Lu Scr. Mater., 2017, vol. 127, pp. 173-77.10.1016/j.scriptamat.2016.09.012 ↗
41. Y. Ohmori and Y. Meaehara, Mater. Sci. Technol., 1986, vol. 2, pp. 595-602.10.1179/mst.1986.2.6.595 ↗