Microstructural features of rolled Mg-3Al-1Zn
Source abstract
Abstract
The microstructures of hot- and cold-rolled Mg-3Al-1Zn (AZ31) are examined using scanning electron and optical microscopy. It is shown that the microstructures following multipass hot rolling and annealing are more uniform than those formed by heavy single pass rolling and annealing. The importance of twins in producing intragranular recrystallization is evident, although the most dominant nucleation site is grain boundaries. The cold-rolled structure after a rolling reduction of 15 pct is dominated by the presence of deformation twins. Twin trace analysis suggests that approximately two thirds of the twins are a form of “c-axis compression” twin. A number of “c-axis tension” twins were also observed and additional in-situ scanning electron microscopy experiments were performed to confirm earlier observations that suggest these twins can form after deformation, during unloading.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. P. Menzen: in The Technology of Magnesium and Its Alloys, A. Beck, ed., F.A. Hughes and Co. Ltd., London, 1940, p. 393.
2. S.L. Couling, J.F. Pashak, and L. Sturkey: Trans. ASM, 1959, vol. 51, pp. 94–107.
3. C.S. Roberts: Magnesium and Its Alloys, John Wiley, New York, NY, 1960, pp. 81–107.
4. M.T. Perez-Prado, J.A. del Valle, and O.A. Ruano: Scripta Mater., 2004, vol. 50, pp. 667–71.10.1016/j.scriptamat.2003.11.015 ↗
5. F. Kaiser, J. Bohlen, D. Letzug, K.U. Kainer, A. Styczynski, and C. Hartig: Proc. 6th Int. Conf. Magnesium Alloys and Their Applications, K.U. Kainer, ed., Wiley-VCH, Weinheim, 2004, pp. 456–62.
6. M.R. Barnett, M.D. Nave, and C.J. Bettles: Mater. Sci. Eng. A, 2004, vol. 386, pp. 205–11.10.1016/j.msea.2004.07.030 ↗
7. N. Ono, K. Nakamura, and S. Miura: Mater. Sci. Forum, 2003, vols. 419–422, pp. 195–200.10.4028/www.scientific.net/MSF.419-422.195 ↗
8. R. Kawalla, N. Coung, and A. Stolnikov: Proc. 6th Int. Conf. on Magnesium Alloys and Their Applications, K.U. Kainer, ed., Wiley-VCH, Weinheim, 2004, pp. 803–10.
9. R.K. Nadella, I. Samajdar, and G. Gottstein: Proc. 6th Int. Conf. on Magnesium Alloys and Their Applications, K.U. Kainer, ed., Wiley-VCH, Weinheim, 2004, pp. 1052–57.
10. Y.-H. Chen, S. Lee, and J.-Y. Wang: Mater. Sci. Forum, 2003, vols. 419–422, pp. 383–86.10.4028/www.scientific.net/MSF.419-422.383 ↗
11. G. Itoh, Y. Iseno, and Y. Motohashi: Mater. Sci. Forum, 2003, vols. 419–422, pp. 355–58.10.4028/www.scientific.net/MSF.419-422.355 ↗
12. J.A. Del Valle, M.T. Perez-Prado, and O.A. Ruano: Mater. Sci. Eng. A, 2003, vol. 355, pp. 68–78.10.1016/S0921-5093(03)00043-1 ↗
13. A. Galiyev, R. Kaibyshev, and D. Voronin: Proc. 6th Int. Conf. Magnesium Alloys and Their Applications, K.U. Kainer, ed., Wiley-VCH, Weinheim, 2004, pp. 266–71.
14. B.C. Wonsiewicz and W.A. BackoFen: Trans. AIME, 1967, vol. 239, pp. 1423–31.
15. W.H. Hartt and R.E. Reed-Hill: Trans. AIME, 1967, vol. 239, pp. 1511–17.
16. M.D. Nave and M.R. Barnett: Scripta Mater., 2004, vol. 51, pp. 881–85.10.1016/j.scriptamat.2004.07.002 ↗
17. M.H. Yoo and J.K. Lee: Phil. Mag. A, 1991, vol. 63, pp. 987–1000.10.1080/01418619108213931 ↗
18. G.E. Dieter: in Mechanical Metallurgy, McGraw-Hill, Singapore, 1988, p. 611.
19. K. Pettersen and N. Ryum: Metall. Trans. A, 1989, vol. 20A, pp. 847–52.10.1007/BF02651651 ↗
20. HKL “CHANNEL 5” Software Manual, HKL Technology, Denmark, 2003.
21. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier, Oxford, United Kingdom, 1996, pp. 173–200.
22. R.O. Kaibyshev and O.S. Sitdikov: Phys. Met. Metallogr., 2000, vol. 89, pp. 384–90.
23. M.M. Myshlyaev, H.J. McQueen, A. Mwembela, and E. Konopleva: Mater. Sci. Eng. A, 2002, vol. 337, pp. 121–33.10.1016/S0921-5093(02)00007-2 ↗
24. R.L. Woolley: J. Inst. Met., 1954, vol. 83, pp. 57–58.
25. M.A. Gharghouri, G.C. Weatherly, J.D. Embury, and J. Root: Phil. Mag., 1999, vol. 79, pp. 1671–95.10.1080/014186199251968 ↗
26. F.E. Hauser, C.D. Starr, L. Tietz, and J.E. Dorn: Trans. ASM, 1955, vol. 47, pp. 102–33.
27. T.A. Mason, J.F. Bingert, G.C. Kaschner, S.I. Wright, and R.J. Larsen: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 949–54.10.1007/s11661-002-0164-8 ↗